21 models
Zero clearance insert for the Bosch GTS635-216. I had to print in two pieces and glue them, but I've included an "un-split" stl also. I added sections of 100% infill around the corners, the joint, and where the blade will cut through. I…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for PETGSource material: PET
Complements : Magnets (Néodyme) : diameter 5 x thickness 3
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for one variant
Since the impeller and the driver are very likely to be defective on this model, I have designed a spare part here.
This is a 300mm miter bar that fits the Skil TS6037-00 table saw. It has 5 holes in the top that I used for heat set inserts for an M5 bolt, but the Fusion file is available if you would like to do something different.
This is a tool used for calibrate injector teflon gasket rings into installation caliber size. Similar to original tool 2 448 401 Print settings: 0,1mm layer After printing all surfaces which will be in contact with ring must be treated…
Adapter to convert the Skil 1340AA Table Saw dust extraction port to camlock. I think 1340AA is the European version of the Skil 15 amp 10 inch saw (TS6307), no idea if it will fit but they look the same. For use with Peter H's Camlock…
Alternative base for the Makita DHS630 by TJDesign's “Guide rail adapter for Makita DSS501” The CAD-file is fully parametric, so if you need this for a different saw feel free to reach out with the dimensions and I will make a new version.
There's storage for everything on the table saw, but for the allen key/screwdriver. Not anymore! It fits on multiple places on the legs. Print in PETG for it's flexibility.
Remixed this from https://www.thingiverse.com/thing:6122834 to split the plate more evenly so it can be printed on an Ender 3 V2 Neo. Also adjusted the length by 2mm as original was noted to be 2mm short. Print Settings Printer Brand:…
Der Clip passt in die innere Nut der ausgezogenen Tischverbreiterung. Über die Sechskantaufnahme kann mittels Mutter und Schraube eine Platte z.B. für eine Oberfräse ausnivelliert werden. In den 2 Bohrungen können Einschmelzmuttern…
Request for the slide adapter for an Azdome GS63H Mount. Can adjust the part as needed by modifying the parameters of the sketch or the extrusion. Cad will adjust the finished part based on parameter edits.
I designed a combo 3D printed/CNC machined wheel for my Robomow RS630 when the plastic gear stripped in mine. I only have a Prusa Mini so I could not print an entire wheel but I do have a CNC router so I printed the center hub with the…
Eine Ersatzklemme für mein Featherboard von NEW für die Bosch GTS635-216.
Scan of my DNT Hydra HS635. Please feel free to use it. My only (unenforceable) ask is that, for any models that you make, you make the files public for others to print. I also included a small model of the mounting interface, including…
Connect your Ridgid shop vac to your Skil 10" Miter Saw (or any other tool that has a ~1.65" OD port)
Simple adapter plate for an MEP-803a or MEP-802a for the Marinco CS6369 50 Amp, 125 Volt/250 Volt Receptacle. The cover cap was created by Digger556(J W) and can be found here https://grabcad.com/library/cs6369-6364-receptacle-cover-1…
Tooling developed to replace the original tool of the ProtoMat LPFK S63. The Spindle nut on the machine I have access to
Box containing X-Radar Chrony + s63 / pwr inserts. need 4x d15x8 magnets m4 threaded rod Countersunk M4 Screws
This 3D STL model is a custom-designed 40mm fan bracket specifically made for the Power Wheels Mercedes-Benz S63 ride-on car. Designed to hold a standard 40mm cooling fan, this bracket helps improve airflow to the motor or electronics,…
This wall mount keeps the zero-clearance insert for the SKIL TS6307-00 table saw protected and ready to use. The retaining slots secure the plate in the base, while the spring-loaded rotating latch provides additional security. Four…
