Counting matching models…
Beside printed parts you will need: soldering iron electrical or kapton tape two 13400 li-ion cells (from disposable vapes) LX-LISC-V2 usb-c 2s li-ion charging board super glue Please don't buy your cells. Just pick them up from curbside…
EDIT: You MUST print this in TPU as stated in the description. If another person reaches out to me on Reddit because they can't figure out how to put their PLA buffer on, I might lose it. Please, PLEASE, print in TPU. HOW TO PRINT 1) Have…
I printed it using ASA filament. Mounting from corners using four small screws (or glue, if you wish).
Nothing fancy just keeps your spare Canon NB-6L or NB-6LH batteries together. Best printed with the scollop side down so the retaining bumps are pointing up. Example printed in PETG at .28
Secure connetion to the Click & Clean Hoses from Bosch, Hose going out to the backside
Made this remix so we can mount the WS90 by routing the cable through the mount.
I have made this Modular Propeller Guard to replace the ones that originally came with the HEYGELO Sirius S90 drone. With this new model, the protection area is larger and its resistance is higher. It is easy to assemble and is tight…
Beside printed parts you will need: soldering iron electrical or kapton tape two 13400 li-ion cells (from disposable vapes) LX-LISC-V2 usb-c 2s li-ion charging board super glue Please don't buy your cells. Just pick them up from curbside…
This is a simple wall mount for the Netgear Nighthawk Tri-Band 6E Mesh router and satellites (same size). You'll recognize it by it's square shape. This simply allows you to mount the router. Prints bottom-side down. No supports needed.
PLEASE POST YOUR MAKES! So I love my little PS90. The trigger was not to my liking so I ordered a K&M Trigger Pack Spring and the P*****d Pawn Creep Killer II (unmodified hammer version). I wouldn't normally freely release something…
This is a very simple block for attaching FS90 servo motors. This is deliberately designed to be minimal so that it can be adapted and added to larger projects. Especially useful for making a long row of parallel servos. NOTE: If your…
Ständer für elektrischen Rasierer - Philips S9000 Prestige Stand for electric shaver - Philips S9000 Prestige Supports: ja/yes (nur für die kleine Halterung auf der Rückseite/only for the small holder on the back)
This print allows you to mount an Apple TV 4k (3rd Gen) to the back of a Samsung S90D TV. The mounting hooks fit in the groove on the back of the TV and allow you to place the Apple TV anywhere along the back. Printed vertically with a…
Updated: 02/05/2023, Added a “No Coin” version that remove the coin holder to give more room. This is a remix of my original console design. This was created in Shapr3D, however, and has a lot cleaner lines and edges than the one…
3D-printed round servo horn for FS90, 21T spline with teeth for a secure grip on the servo spindle. I designed this 3D-printed so it allows for screwing into the servo for a more secure attachment, eliminating the need to glue a plastic…
EDIT: You MUST print this in TPU as stated in the description. If another person reaches out to me on Reddit because they can't figure out how to put their PLA buffer on, I might lose it. Please, PLEASE, print in TPU. HOW TO PRINT 1) Have…
This fits around the rubber cap at the top of the saw. Pull cap off, place holder on rubber plug, insert plug back in. The tab on the holder has a 5-degree angle that keeps the miter away from the saw body. I use standard settings for PLA…
EN: With this adapter, an Ecowitt WS90 weather station can be mounted on pipes or railings up to 45mm in diameter using a standard M8 pipe clamp. The adapter has a diameter of 25mm and a recess especially for the WS90 power connection…
Modified version of the iPhone Pro Max Magsafe holder. This has a slightly larger hole to accept the Anker PowerWave Select+ charger instead of the Apple one. Print using a heat resistant material like PETG/ABS/ASA/Nylon.
A common issue observed in Volvo SPA platform vehicles equipped with panoramic glass roofs is the shrinkage of weather stripping due to UV exposure. A new part number (32342701) has been introduced, featuring two-sided tape on one side.…
A simple module in OpenSCAD for use as a placeholder in your designs. All feedback is welcome.
I printed it using ASA filament. Mounting from corners using four small screws (or glue, if you wish).
Wall mount for a Ecowitt WS90 weatherstation. To mount outside: Print in PETG Screws 4x40mm stainless steel
Nothing fancy just keeps your spare Canon NB-6L or NB-6LH batteries together. Best printed with the scollop side down so the retaining bumps are pointing up. Example printed in PETG at .28
My friend broke the original handwheel for his SIP wood lathe and was distressed to discover from SIP that the part was unavailable. 3d printer to the rescue... I took measurements from the original wheel and made modifications to the…
Just a simple VOLVO keychain I made for my S60 keys. Its the exact length as the P3 key and takes vary little space and filament. Infill: 25% (I used Hexagon infill pattern with 3 walls) Material: ANY (I used SUNLU PLA Matte and it has…
How to assemble ? Requires 4 short M4 screws and nuts. To complete the wheel : Print the model 2 times, You may need a file tool (the thing you can remove plastic with, sorry I'm not sure about this translation) to make sure the servo…
How to assemble ? Requires 2 M2 screws (doesn't need to be very long) and nuts to hold the servo motor. All you have to do is to put the cables and servo inside, put the nuts in the holes and finally the screws. To attach the holder to…
Magazine cap, replacement floorplate, and extended buttpad for a PS90Magazine cap, replacement floorplate, and extended buttpad for a PS90
Designed this part after the original on fusion 360. I know from the customer that the part works though I have not seen for myself. Recommend printing in industrial filaments like nylon carbon fiber as the ones in the photo were made…
Powered by Shelly Ecowitt WS90 - 7-in-1 weather station stand for flat surfaces
Adapted a birdhouse segmented pole (from a birdhouse mount kit) to use as stand for Ecowitt WS90 weather station sensor array. The adapter fits on end of one segment of the pole. The other end of the adapter is for the 1-inch pole mount…
I was experiencing some feeding issues with my PS90 with a CMMG barrel. The feed lip on the chamber was very sharp and was causing damage to the brass, bullet setback, and failures to feed. This tool is meant to be used with lapping…
This adapter is a mix of the great adapter by Duc848 on Makerworld join with a male coupling for the camlock system.
If you want to engrave your PS90 under the charging handle for NFA reasons, here's a nice mount to hold it in place. Printed with PETG at 15% infill with no supports. Should be straight forward and work just fine with any filament.
Secure connetion to the Click & Clean Hoses from Bosch, Hose going out to the backside
Made this remix so we can mount the WS90 by routing the cable through the mount.
This is a magazine spring plate for an original 50 round FN Herstal PS90 magazine. It is meant to replace missing or broken plates in your existing 50 round magazine. Check local laws for your location in regards to allowable magazine…
This optimized dust extraction nozzle for the Scheppach BTS900 focuses the full suction power directly on the sanding belt — exactly where most sanding dust is generated. The nozzle simply slides onto the original dust outlet and connects…
Male camlok fitting based on Peter H's camlok system and for use on the dust port of the Ryobi BS900 bandsaw. Should also fit the dust ports of the BS901, BS902, BS903, and BS904. Fitting OD is 57mm. Printed on Ender S1 Plus. 3 walls, 10%…
Case for Happymodel ES900TX ELRS module, with fan space. Printing Print the model in any material where there are the leds there are holes of the right size for using transparent filament to bring the light on the outer part.
Ein Adapter / eine Halterung, um eine Ecowitt Wittboy WS90 Wetterstation auf eine vorhandene SAT-Halterungsstange draufzusetzen. SAT-Stange hat einen Innendurchmesser von 49,8 mm (ohne Schutzkappe auf der Stange) auf Ecowitt 27 mm…
This is a replacement for the table angle adjustment knob that adjusts the angle of the table on the Ryobi BS901 9" Band Saw. This part is no longer manufactured by Ryobi. It is not an exact replica, but it is fairly similar, and most…
I needed an adapter to connect my Scheppach BTS900 to my shop vacuum system. This hose adapter is able to connect to a 50 mm ID tube directly. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No…
Simple Mount for a Philips S9041 Shaver using a suction cup to mount to bathroom tile
Replacement of the insert plate for 90° cuts. The insert plate is slightly thicker (3.5mm) than the original part as the original was below the surface of the aluminium plate. The angled part of the screw hole was slightly to small and I…
Remix of Stamos' case for the Raspberry Pi 3. Made for the Libre Computer AML-S905CX-CC (Le Potato) SBC that has the (mostly) same layout as the Raspberry Pi 3+. This is set up with a hole for the IR receiver as well as indentations for…
I remixed this for a friend replacing the fillets with chamfers for better printability. It is currently printing and pictures will be uploaded when it is complete.
I took @Stamos's lid idea and added a post to use for LED fiber optic style illumination (I'm still tinkering to get the filament holes lined up better - it works as is, but it could be better). The lid is for the @Stamos's case that was…
Two piece case for LIBRE AM-S905X-CC Le Potato. Though this is my own design, I had a lot of inspiration from this design and highly recommend it if you need case for RPi 4b. Print with your desired material. No supports required. Print…
This is a cam lock to enable you to complete a timing belt replacement on your 1997 Volvo S90 with the 2.9L straight 6, (Vin Code 96), engine code B6304S. This model may require some slight trimming if the print suffers from elephant…
VCI (OBD bluetooth) mount for AUTEL MaxiSys MS906TS, it might work for other AUTEL models but not sure. would be nice if you could post some photos after printing
This Volvo XC90 center console contains slots for loyalty cards (full size and small), a work badge, pepper spray, hand sanitizer as well as quarters, dimes, nickels and pennies. There is also a place to put a wireless CarPlay adapter so…
This is a Mount designed to interface with the optics mounting screws on an FN P90/PS90, The mount is compatible with all Surefire Pro Series light bodies (the ones with the hinge mount) Using OEM Hardware Please Note that as this is a…
Sadly the opening in the battery cover is not big enough that a USB plug can fit. So you have to source some small barrel plug socket and jack. I used a 4mm Socket that I had laying around. The .stl file I provide here has just a 4mm hole…
I modeled the insert for the Ryobi 9-inch band saw (model: BS904G) just in case I ever lose it (part number: 089079005002). I went ahead and made a zero-clearance insert for it, too. I have to say, I like the zero insert better. The zero…
The teeth on the stock leveling lever can wear down, this is replacement in the form of a regular knob. You may even want to give it a go even if your stock lever is fine, this is much easier to use. Take of the original lever, and push…
My hobby band-saw's insert was worse for wear so made a 3D print replacement. Not for angled table. Blade is off center to the right by 2.5 mm. Printed in PETG with textured build plate. YMMV. Slicer Info: Filament: PETG Infill: 100% Used…
I wanted to have some anti vibration feet for my espresso machine, Graef ES90. They slide over the original feet and stay in place because of the TPU elasticity. Print settings: Material: Das Filament TPU V2 / Flex (Shore 94A) Nozzle…
Just a case for my DAC using an old Rpi1 B+ and A DAC (Sabre ES9023) Everything works fine with Rune Audio... You would use a few nylon screws to attach the electronic to the support. Enjoy :) Print Settings Printer Brand: Ultimaker…
This handle will fit with a small amount of filing inside the handle. I made it this way to fit all the different size rods that come on the PS90. Print .12 layer at 100 percent infill. Standing up with tree supports like picture. It will…
Just print and attach it in the dust container. Be careful when removing it from the heatplate, the part is quite thin and can be pretty easy to bend out of shape.
This is a remix of a remix of Stamos' case for the Raspberry Pi 3. This case has been modified for the Libre Computer AML-S905X-CC-V2 aka, “Sweet Potato” SBC that has the (mostly) same layout as the Raspberry Pi 3+ and the Libre Le…
I designed this part for my Volvo S90, but I'm pretty sure it will fit the V90 and XC90 as well. The original part is a little different, but I changed the orientation of the clips to make the item more durable. I printed it with PETG,…
I have made this Modular Propeller Guard to replace the ones that originally came with the HEYGELO Sirius S90 drone. With this new model, the protection area is larger and its resistance is higher. It is easy to assemble and is tight…
A remix of the best part I could find. See Differences section for notes.
This is a stock extension for PS90. This will not fit airsoft. The passthrough hole in the stock is for the sling (Stargate style). It has a hole inside for the part of the bolt that extends into the stock. Best printed with fuzzy skin.…
