Counting matching models…
Replacement cog for Vectra C and some Saab 93 recirculation units where the small white cog has lost teeth. Where there is a clicking noise from the servo/motor unit one or both of the white cogs may have lost teeth. The larger one can be…
Simple and prints quickly (~10 minutes on my printer). This keychain is based off of a picture I took of my buddy's car so dimensions may be off slightly. About 3 1/8" x 1" x 1/8" for the original model sizing however should scale nicely…
Lichtgevend jongens naam Isaac, Luminous boys name Isaac
The Saab JAS 39 Gripen ("The Griffin") is a multirole jet aircraft in service with the Swedish Airforce since 1996. It is also used by the airforces of Brazil, Czechia, Hungary, South Africa and Thailand. This model is based on Kaboldy 's…
Diese Saatpalette kann dir bei der Aufzucht deiner eigenen Pflanzen helfen. Sie passt gut auf so ziemlich jede Fensterbank. Sobald die Pflanzen groß und kräftig genug sind, solltest du sie in einen großen Topf oder ins Beet Pflanzen,…
can be printed together the model needs to be glued together or separately in other colours the Gripen is very realistic Print in place kit card , Assembly required need to use a support
Miniature of a Colt SAA Revolver (Storekeeper or Sheriff model) with classic octagon barrel. Prints as 6 different parts that are press-fit together. Simplified model: The hammer is fixed and no loading gate. Trigger moves but does…
The Saab JA 37 Viggen (double meaning; “The Tufted Duck”/“The Bolt”) was a multirole jet aircraft in active service with the Swedish Airforce 1972-2005. I just wanted to make one matching my Gripen for some nostalgic reason. This model is…
I see that you like The binding of Isaac! Great! I made this keychain of the game character called Isaac. Ready to be printed in three colours. I used white for the base, then change to blue, and lastly black for the outlines. If you…
Bring home the brilliance of one of history’s greatest minds with this stylized 3D printable bust of Sir Isaac Newton . Designed with smooth, sculptural forms and exaggerated features, this collectible model captures the essence of the…
Double din radio mount designed for the Saab 9-3 07+ You have to modify it to fit your radio, but it fits in the dash. The dash curves a bit, which this mount doesn't. Other than the curve, it fits like a glove! This mount is still work…
Here you have a replica of the coins from "The Binding Of Isaac 4 Souls" card game. I created this to have different types of coins in the game. I found it very annoying that there was only one type of coin, as you can get a lot of coins…
Saab 96 V4 cookie cutter, please enable print thin walls in slicer
The Saab 9-3 Hirsch Performance cup holder inserts gives your refreshments the perfect fit while increasing performance by reducing balance-shift in the fast moving corners. This will decrease your (lap-)time to and from work, and improve…
PETG / Infill 25% Aus meiner Sicht gibt es hierzu eigentlich nichts zu schreiben, erklärt sich doch von selbst. Falls dennoch Fragen sein sollten, schreib mich gerne an. ++++ From my point of view, there is really nothing to write about…
I see that you like The binding of Isaac! Great! I made this keychain of the game character called Lost. Ready to be printed in three colours. I used white for the base, then change to blue, and lastly black for the outlines. If you…
Saab JAS 39 Gripen Fighter jet Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Experiment in tracing a picture and converting it to a 3d model. Printed on Prusa Mini using Prusament PETG with 15% infill at 0.20 layerheight, no support needed. Approximately 15 min printtime.
This is a self-designed body for a WL-toys K989 rc car. The design is based on the SAAB 9-3 sportscombi but with a wide bodykit to fit the dimensions of the K989 chassis and a Hirsch inspired wing in the back. I modeled the body in…
I did a remix to be able to either replace the logo with whatever or print it with extruder 2 using another color. It worked out nicely. Also it is possible to print the cap itself with the flat top now facing the print bed. That way, it…
Tone knob (Treble, Bass, Fader) for SAAB 9-3 Generation 2 For me it worked to print it without supports on my modified Ender 3. Print with the hole down. Might need some force to push in place. The car key worked great to push with ;)…
Saab cross spoke cap for 900 and 9000 series I didn't print it yet.
This is the legendary SAAB JAS 39 grippen, competitor to the euro fighter, this will intercept you any time
First of all, to thank Jonathan67b for inspiring me with his design for a deck holder. This three holders are designed to stack on eachother and fit inside the original box. You can fit the entire game + kickstarter expansion with sleeved…
Washer fluid reservoir cap with griffing logo for saab 9-5 Tested on 1998 9-5, reservoir changes atleast on 2006 so this might not fit. There is two versions of this cap, one has a tighter fit and other looser. Print with supports logo…
Saab 900 Saab trunk emblem
Isaac Moriah from The Binding of Isaac series. The pose is based on the sprite that appears every time you're about to fight a boss (you can see it here ), though I added the tears as how they always appear in Isaac's in-game sprites…
Keychain with the classic SAAB turbo logo
Hello. This model will able you to use your broken warning light switch ( Saab 4109526 ), your switch it's ok ? fine, print this hehehe, nobody know when the switch will broken and pushed trought the dash. Saab 4109526 for: - Saab 9000 -…
Elegant Lightweight Fighter Concept from Sweden. https://www.youtube.com/watch?v=JNB1klmzdcQ https://en.wikipedia.org/wiki/Saab_JAS_39_Gripen Source: http://logic-wizard.art.coocan.jp/fms_e.htm Modified/Remixed Design from:…
I made this big SAAB-badge for a friend of mine who is a SAAB-fanatic. The original design is lent from a sticker . I converted the downloaded jpg into a svg-file * which gave a pretty useful and high quality result this time. The SVG can…
Bust of Isaac Newton Sir Isaac Newton (1643–1727) was one of the most influential scientists in history. An English physicist, mathematician, and astronomer, he laid the foundations of classical mechanics through his laws of motion and…
Saab 900 Turbo trunk emblem
The GlobalEye is a modified Bombardier Global 6000 business jet designed to provide multi-role airborne early warning & control (AEW&C) platform from Swedish defence and security company SAAB . Model is small to be used as a desk model, I…
Simple alternate coins (nickel & dime) for Binding of Isaac: Four Souls card game. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 10% Filament: Prusament PLA Silver Notes: Depending on…
Fits both 900OG and 900NG model. Several ways to achieve proper colour combos: dual color print - black and silver print in black, paint the front silver print in silver, paint the entire emblem black, sand down paint on the front
Sun-visor clips for SAAB 902s and 9-3 I are getting rarer, especially new parts (new old stock). That's why I modeled this part after the original part of my convertible. But it also fits into the 3 and 5 door versions. I recommend…
A replacement shroud for the Rush by shoelesshistorian. It features M-LOK slots on the sides and is compatible with both metric and imperial hardware.
This is a 9 cm ( 3.5 Inches) high articulates action figure of Isaac the Kaylon from The Orville TV series. Yo can print it in a kit card fashion or as separated parts.
Saab 37 Viggen This Swedish single-seat, single-engine, short-medium range combat aircraft was the strike-fighter and fighter-interceptor of the Swedish Air force before it's retirement. It boasts an incredible design as many variants of…
this is a replacement for the lever in the climate control unit of the SAAB 9-5 OG
A must for every fan of classic Swedish fighter jets: A SAAB JA37 Viggen cookie cutter! It works well for traditional Swedish Christmas gingerbread, but should work with other doughs as well. The gcode prints a rather large cookie cutter.…
The main character from The Binding Of Isaac
Simple holder for 10 coins for the card game "The Binding of Isaac: Four Souls" Printed at 0.20mm layer height.
308 Win - SAAMI Spec 2.825 COAL - Mag Length (SAAMI COAL = 2.810') 2.100 CBTO
el modelo esta aun en desarollo se puede fragmentar en tres partes para imprimirlo o escalarlo y requiere pequeñas mejoras de manera artesanas como bandera escalinata y helices .
This is how to do it (works fine for any logos or emblems): 1.) I've found a nice large and clean color picture of a logo, openned in photoshop (or any layer based editor. Selected the circle (including all he print on the circle) - this…
Replacement part for the Saab 9-5 automatic shifter console . This is the sliding roll cover located directly under the gear selector lever (the straight forward-back type shifter). The original part often breaks or gets stuck over time.…
SAAB-35 Draken card kit, two pieces, it is V1 so it is probably going to be updated in the future. There are some problems when slicing the cockpit, but it is printable.
Replaces the passenger side handle on the SAAB 9-3 center console. This is only the top part that snaps into place with no screws needed. Should fit all 2nd generation 9-3s. Printed on an Ender 3 V2 Neo Printable vertically with no…
A friend, who is a classic cars aficionado, asked me to recreate the missing gutter caps of his beloved Saab 900. Print Settings Supports: Yes Category: Automotive
Custom pillar gauge pod holder designed to suit standard SAAS gauges. This model is available in multiple configurations so you can choose what fits your setup. You can print: Single pod Dual pod Triple pod Each pod can be printed…
AE86 aracının saat gösterge panelinin 1:1 ölçülü parçası. 1:1 scale piece of the clock display panel of the AE86.
cool plane. should print without any supports except for the engine intakes, but most parts will most definitely need brims or rafts. especially the wings. civilian version coming soon (Bombardier G6000) no clue what else to put here lmfao
Round coin with a ¢ symbol on one side and a pentagram on the other. Inspired by the coins from the game Tboi Four Souls
The Saab JAS 39 Gripen is a multi-role fighter aircraft developed by the Swedish aerospace company Saab. Known for its agility, advanced avionics, and cost-effectiveness, the Gripen is designed to perform a wide range of missions…
Saab 900 Turbo, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
I made this in three pieces to avoid support, but it still needs support on the overhang, but this is printing with ABS. It may be different when using other materials. The parts snaps nicely together and doesn't need any adhesive to stay…
Made mine in PETG 0.4 nozzle and 0.2 layer hight 6 walls and 25% cubic infill.
223 Rem. - SAAMI Spec 2.26 COAL 1.85 CBTO
Forgemaster Isaac's Knife - Netflix Castlevania Seasons 1-4 Forgemaster Isaac's knife used to create night creatures, first for Dracula, and then for his own story. Also, used as primary offensive weapon to attack and defend against…
Adapters using original mounting for 6.5" speakers in doors and adapters for the 3.5" speakers in the dash. I could not find adapters so I made my own. For cars that don't have the door speakers installed from factory. Cables are…
Coolant cap designed for the Saab 9-3 2003+. It is designed to go on top of the original cap. It fits excellent, and snaps around the original cap. It's easy to modify it in Tinkercad, to get the logo you want. I printed the cap in PETG,…
This is a replacement part for Saab 900s. This part is located at the bottom of the door card and helps secure it to the metal door. Outer diameter is 20.5mm with the inner diameter of 8.5 chamfered down to 5mm. The washer itself is 3mm…
---"Download all files" is broken, but it is possible to download each file individually under "Thing Files".--- Cookie cutters shaped as various Saab models ranging from the Ursaab to the last generation Saab 9-3. Print Settings Printer…
I designed this Golden Chest as a token box for The Binding Of Isaac Four Souls card game. The tokens didn't have any container and I wouldn't like to mix them in the coin bag, so I designed this. It looks more like a generic golden…
Model of Isaac from The Orville. I made the original model , but it was converted for 3D printing by @don1701 Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes Category: People
Simple lightbox of Saab logo Profile made for bambulab x1c, print as solid piece. Includes .stl files for each part and color.
9 cm (3.5 Inches) articulated action minifigure of Isaac the Kaylon from The Orville TV series, Season 3.
300 PRC - SAAMI Spec 3.685 COAL (SAAMI MAX = 3.700) 2.825 CBTO
Item from The Binding Of Isaac
Children of the Corn - Isaac - 1982 3D printable model. Super simple model to print, adjust size to your needs and you're all set!
6.5 PRC - SAAMI Spec 2.90 COAL (MAX 2.955) 2.20 CBTO
A car window guide roller, designed specifically for the Saab 900 9-3 9-5. 3D-printed from durable, abrasion-resistant plastic, this component allows for smooth movement of the window in the guides and replaces the original part. An ideal…
Replacement caps for your handles above the door. Slides right on like the stock ones.
A wire frame model of the Saab J35 Draken. Highly inspired by LimaMike3D LimaMike3D He just lacks Swedish vintage jets :) Line thickness is adapted to printing on a 220x220 print bed. Scale to suit. Printing: I used black PLA with 3 walls…
NPC from The Binding Of Isaac
Gear stick adaptor for the Saab 9-3, coverted from the lift colar to select reverse to lift the whole stick mechanisum and add an aftermarket gearknob. The design will beed tweaking to fit a different gear knob as the diameter / size of…
READ PRINT INSTRUCTION! Saab logo caricature. ONLY FOR MMU(if you want you can split it to objects, but I don't recomend that) For better resoluton on 0.4 nozzle change size to 150mm(or bigger)Print should take 4h and 20 minutes on 0,2mm…
Are your car keys feeling lonely? Or do you want a silhouette of your car? Look no further! Add a nice-looking keychain or a silhouette of the sporty and stylish SAAB 93. 0,4 nozzle 0.2mm layer, 2 walls No support needed. I printed it…
I made this in two pieces to avoid support, but I still need support on the overhang, but this is printing with ABS. It may be different when using other materials. The two parts snaps perfectly together and doesn't need any adhesive to…
Saab 900 TurboS trunk emblem
The outside cover fell off my shifter. and OEM replacements are impossible to find, or cost an arm and a leg. So I made this knob to go over the white plastic knob that is press fit on to the shift stick. My OG9-3 is a '99. Im assuming…
SAAB JAS-39 gripen card kit, two pieces, it is V1 so it is probably going to be updated in the future.
Simple flat model of a bomb with pixelated texture from the game The Binding of Isaac I printed it with gray and black colour. If you like the model do not forget to leave a like and photo of your print!
Print as solid, made for bambulab with ams to get a smooth color changes You can scale in X & Y to fit your printer but leave Z as it is. I did use 0.2mm layer height
Character from The Binding Of Isaac.
Saab J29F Tunnan. I have remeshed and inflated the original model by ThibautF(https://www.thingiverse.com/thing:4549480) to make it easier to print at smaller sizes. Print Settings Printer: XYZ Da Vinci jr 1.0 Pro Rafts: No Supports: Yes…
Séparateur de carte pour le jeux the binding of isaac four souls
Auf Wunsch meiner Schwester habe Ich diesen Keksausstecher designt. Und da es bestimmt noch mehr Fans dieser Mannschaft gibt, stelle Ich Ihn gerne zur Verfügung. Die Grunddatei ist etwas klein geworden aber die Größe kann im Slicer…
6.5 Creedmoor - SAAMI Spec 2.825 OAL CBTO: 2.08
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A detailed 3D model inspired by Azazel from The Binding…
An iconic piece of art ... Saab Draken from: http://logic-wizard.art.coocan.jp/fms_e.htm (The "silver" one is from the Sketchup Warehouse) https://en.wikipedia.org/wiki/Saab_35_Draken https://jetworks.online/product/j-35-draken-plans/…
