Counting matching models…
Replacement heel and toe plates for the Salomon Symbio Ski boots. Printed in PETG, TPU would be best, that's what was originally used. These are dimensionally far more accurate than what I could find on here. Replaces parts: Heel Plate…
A dryer stand for 500ml soft flask bottles from a Salomon running vest. Remix of Rainer Stropek's design.
There are 150mm and 200mm height options. Optional drip tray.
This is a tray for use with the 500ml Salomon Soft Flask Bottle Dryer Rack you can download here: https://www.printables.com/model/938523-500ml-salomon-soft-flask-bottle-dryer-rack The model includes a tray and an insert which provides a…
1.- Introduction As with all prints I do, all start or from a need, a fix or a lust-to-have. This model was designed as a fix for a broken heel in a sky boot from a good friend, that got deteriorated due to age and use. 2.- Design Process…
Got tired of my drink mix scoop being a little to wide to easily dump into my soft flasks so I mad a quickie funnel. Fits just right for dumping a scoop of stick drink powder into a soft flask without getting all over... I don't use the…
Replacement for the rubber heel piece which aids in walking. Mine were dry rotted. I would recommend printing with a lot of perimeters and high infill in TPU. This part should not interact with the binding at all. 20204-02-19 Update (v6):…
These are UFS sole plates for the Salomon ST series boots. These soles require the middle bottom of the boot to be totally flattened. If you're a Salo purist then these are not the soles for you. Sizes 25-26.5 and 27-28.5 available. More…
FR: Je ne pouvais pas trouver de pièces de rechange pour remplacer les cales arrière sur mes chaussures de ski Salomon Performa 6.0 Sport ; j'ai donc décidé de les recréer avec Fusion360. C'est ma première création donc largement…
Salomon Hydrapak Dryer for 500ml Soft Flask
I did this model repair my ski shoes 100% filling print is a must
I designed this valve cover for the Salomon Soft Flask . Satisfying closing noise and feel!! The Salomon hydration soft flask is great for running, but when using without a running vest, you can easily spill a lot of water trying to reach…
Modèle 3D de semelle pour remplacer les semelles d'origines de bottes de ski Salomon SX61. Il est conseillé de les réaliser en TPU 95A pour plus de résistance aux frottements et écrasements sur un sol sans neige. Filament : TPU 95A…
Here is an updated version including the PETG requirement: Replacement Ski Boot Soles for Salomon – Precision-Modeled Upgrade (PETG Required) Engineered as a high-quality replacement for compatible Salomon ski boots, these custom-modeled…
Modeling a clip to hold the tubes of my soft flask during my trail release ;)
Voici un support mural pour égoutter vos flask Salomon !
Skiing google holder elastic band holder hook for Salomon Aura downhill skiing helmet. Print Settings Rafts: No Supports: No Infill: High Filament: 3DPlastx ABS white Notes: Filament needs to be impact resistance in the frosty weather…
I used original screws for fixing, I dont expect a long life :-)
Salomon Performa Toe Plate - podrazka lyziarky predna
CROSS COUNTRY SKI INTERFACE to adjust the position of a SNS-Pilot binding on a IFP-ski rail. Allow to test the different position on ski : Pos -2; Pos-1; Pos 0; Pos 1; Pos 2; Pos 3 You need additionnal screws: M5 - 12 mm - BTR countersunk…
I made these soles for a friend as a replacement for the ones that came with her boots. They are made for boot size [UK 6] and i don't know if they are the same for other sizes. My printer doesn't support TPU printing so PLA was my only…
Suggested use: 70mm – best off the groomed trails 60mm – for deep powder, groomed once, without the crust layer at the top 50mm – when hard crust has formed but stock baskets still go through Mount with a zip tie through 2 holes in the…
A dryer for the Salomon flask and bladder (designed for the 1.5L bladder, but also work for the 2L version). It also work for other brands of bladders and flask, but was designed for the Solomon's ones. There is room for 5 flasks an 3…
The original part cracked after some time, and I could not find a replacement online...
Reparaturteil für Salomon Quicklace-System Dieses 3D-Modell ist eine robuste Reparaturlösung für Schuhe mit dem Salomon Quicklace System . Nachdem bei mir das originale Reparaturteil von Salomon direkt beim Verknoten der Schnüre wieder…
Split in meshmixer. Category: Sport & Outdoors
Sistema di Protezione Perdita Occhiali per il Casco da SCI o SNOWBOARD (Marca SALOMON) per passaggio Fibbia degli Occhiali con Bottone Automatico.
didnt find the right one for my boots so i made it, hope this help someone its for the salomon verse sf i printed it with tpu 57D, 8 walls, 6 under, 6 over, 50% infill
This is a miniature model of the Temple constructed by Salomon for Jehovah.
If your Quicklace latching system is broken on your Salomon footwear, this model is for you. For the inner cog, use the design from timmyisasleep on Thingiverse: https://www.thingiverse.com/thing:5457623 Printing parameters: Material:…
Salomon soft flasks don't come with a cap. This makes them hard to store without draining half of the bottle. You can buy dust caps as a replacement part, but they come with an annoying strap keeping the cap around the open bottle. This…
Description This project is a precisely fitted heel pad replacement for SALOMON shoes, designed specifically for 3D printing. The model is fully optimized for additive manufacturing and includes integrated breakaway supports to ensure…
Reparaturteil für Salomon Quicklace-System Dieses 3D-Modell ist eine robuste Reparaturlösung für Schuhe mit dem Salomon Quicklace System . Nachdem bei mir das originale Reparaturteil von Salomon direkt beim Verknoten der Schnüre wieder…
