Repair/Replacement for a Salomon Sky Boot Heel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement/repair part for the Salomon Impact X7 Sky boot heal part. (Size 26)
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 253
- Makes
- 1
- Views
- 1,125
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Winter Sports
- License
- Creative Commons — Attribution — Share Alike
1.- Introduction
As with all prints I do, all start or from a need, a fix or a lust-to-have.
This model was designed as a fix for a broken heel in a sky boot from a good friend, that got deteriorated due to age and use.
2.- Design Process
The design process was straight forward. It was done iteratively preparing test prints for being sure that the estimated measurements were correct, such as hole placement, check that the heel angle is correct and that there is no problem with the fittings. Once all was perfect it was easy to finalize the design and print the complete part.
It was fun to design the heel part with Fusion360, based on a very deteriorated part, especially when you don't want to touch the other heel pair part until you finish it (from the other boot)
3.- Printing the Model
For printing, it is required to change the vertical shell perimeters to 4 (or more) to enforce the sole places where it gets attached to the boot (holes for the attachment screws)
I did not turn on supports, although it is possible to add supports for the sole patterns to get well printed.
I suggest printing in PET-G, or even in a hard TPU for having a better feeling.
(I did not try TPU because I do not have TPU here)
| Printer | Prusa MINI+. |
| File | Salomon-Impact-X7-Sky-Boot-Heel-Replacement.stl |
| Print Time | 4:33:03 hours. (Collected from Octoprint after printing) |
| Filament used | 18.67mt (55.24gr) eSUN Black PETG. (Collected from Prusa Slicer) |
| Layer height | 0.2mm. |
| Printer Nozzle | 0.4mm. |
| Perimeters | 4 to enforce walls around the holes. |
I have upload the GCODE file as well.
Feel free to use the one that suits you best.
4.- Other Replacement prints I designed:
- Garden Tying Wire Reel.
- Repair/Replacement for a sliding door handle.
- Square Furniture Foot Leg Cover Cap (20x20x20 mm).
- Repair (Replacement) for a broken strainer handle.
- Tupperware Round Cake Taker Lock.
3.- Change Log:
- Upload: 2023-10-09: Initial Version.
4.- Last Words
Please don't forget to ★ Rate and ❤ Like
Post your Makes to earn Prusameters!
Do not hesitate to ask questions, feedback is essential to making better models.
You are kindly invited to follow me to get updated when upload new models.
Happy printing & Greetings from the Galilee.
Hope it was not TL;DR