2,228 models
As the Sketchfab store is set to shut down in just days, we're facing an uncertain future. In a few months, it may become impossible to share 3D models freely. This community holds a special place in my heart, and I plan to continue…
Print approx. €5.52–€6.75 excl. taxPreliminary estimate for one variant
This kitcard is designed in Fusion360. The model from fotos is printed on Prusa mini+ with nozzle 0,4mm. Material is Prusament PLA vanilla white. You can check the print file for more info but its easy and fast print. Please share your…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
Oui oui, I have croissants in my Christmas tree! This is one of my first designs I made in Fusion a couple of years ago. And every year people say how cool they think the croissant ornaments are in my Christmas tree 🥐🎄 Size…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant
Turn all your benchys into festive christmas benchys with this santa hat. Print - Paint - Push on - Share your Make Important note: Load the file into prusa slicer. Fuzzy skin will be active for the two white parts of the hat. Just change…
Print approx. €0.90–€1.10 excl. taxPreliminary estimate for one variant
Print with PLA 0.2mm QUALITY Infill 15% Bed Temperature 70 for without printer enclosure No support needed Printing orientation please check with gcode file
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Rosa per Sant Jordi, Sant Valentí o el dia que més convingui.
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
Thanks to 3D Printy for the bobble models, and sb43201 for the original Santa Claus model that was remixed by so many others. The original Santa Claus can still be found on Thingiverse: https://www.thingiverse.com/thing:2702723 This took…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
🇪🇸 ¡Bienvenidos a Santiago de Compostela! This model was created in collaboration with 3D artist Marc Mons . NOTE - This model cannot be sold physically or digitally, even if you are a subscriber of the MiniWorld Reseller License tier. It…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant
We love the giant lego toilet roll holder created by vvk187 - https://www.thingiverse.com/thing:1996077 However, we wanted to have him festive at Christmas! Friction fit, easily remove with a little force, no glue required. STEP can be…
Print approx. €5.24–€6.41 excl. taxPreliminary estimate for one variant
Santa Creeper Minecraft Christmas Decoration
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Quick santa hat for my kiddo's Easy 13. Fuzzy skin (0.2 point distance, 0.3 thickness) with Hilbert Curve top-infill turned out really nicely.
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Easy print. The two halves must be glued together. I used KrazyGlue and it worked fine. A couple of skewers made the legs. No special settings needed; I used 10% infill but I think you can use whatever you want. I added the black details…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
The Cross of Saint James for the famous "Tarta de Santiago" from Santiago de Compostela in Galicia in Spain. Just let the cake cool after baking, then put this cross on the cake and sprinkle it with powdered sugar. Here is the recipe:…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
Bowser in a santa suit and a basket of gifts.
Print approx. €24.51–€29.95 excl. taxPreliminary estimate for one variant
Update: 11/30/2023 - Added a coaster holder. Moved chamfer on coaster rim from the outside to the inside. This will allow the coasters to be more compact & stable when stacked. From the chimney of creativity comes the third of my holiday…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
Meet the Mini Santa Buddy — the jolliest member of the Mini Buddies collection! 🧠 Be extra careful when removing supports — the little pom-pom on the hat is fragile! 🎅 Height: only 12.5 mm ✨ Full of festive details — tiny hat, belt, and…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Meet the Sitting Santa — a cheerful Christmas edge-sitter bringing instant holiday joy! 🎅 Height: 60 mm 🎁 Designed to sit perfectly on shelves, tables, or window sills A fun and heartwarming decoration that fits right into any festive…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
I discovered a free-to-use Santa Claus clipart online and converted it into an SVG file using Adobe Illustrator. From there, I designed a multicolored 3D-printable model, specifically for use with a multicolor 3D printer. To assemble:…
Print approx. €2.47–€3.02 excl. taxPreliminary estimate for PETGSource material: PET
This is a sweet little decoration figure of a santa, and is perfect as a give-away or a little gift for christmas. Thank you for your interest! Feel free to share your prints or print files with the community! Design by ejo, downloaded…
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for PETGSource material: PET
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Native American Design Elements Santa Skulls 3 Christmas Ornament
Print approx. €9.05–€11.06 excl. taxPreliminary estimate for one variant
When in doubt, eat bread. I designed this jewelry set as a surprise for Twirlygrl. (Shhhhhhhhh!) Size up or down but watch the size of the post hole. You can also make a necklace or pendant for other forms of jewelry. For the findings to…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
Meet the Mini Santa — the tiniest bringer of Christmas cheer! 🎅 Height: 22 mm 🎄 Perfect for Christmas dioramas, shelf displays, or miniature collections A small but mighty Santa ready to spread festive joy everywhere! Use tree supports on…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Santa Skulls 4 Christmas Tree Ornament.
Print approx. €4.06–€4.96 excl. taxPreliminary estimate for one variant
Ukrainian Folk Design Santa Skull Ornament.
Print approx. €4.37–€5.34 excl. taxPreliminary estimate for one variant
🎬 Video: Watch how this festive 3D model comes to life, layer by layer. https://www.tiktok.com/@3dprintfactoryat/video/7540265970645110038 ℹ Description: This chibi-style Santa Claus figure was custom-designed to blend cute proportions…
Print approx. €4.66–€5.69 excl. taxPreliminary estimate for one variant
Description This is a FREE digital 3D model of a lightsaber from Star Wars: Jedi Survivor. The design faithfully replicates the look and feel of the lightsabers in the game. The coolest part? It’s part of a complete collection of all 19…
Print approx. €14.87–€18.17 excl. taxPreliminary estimate for one variant
Mini sliding lock - Mini verrou coulissant This “print in place” sliding lock has been created to lock the birdhouse bottom door. Ce verrou coulissant “imprimé en place” a été créé pour fermer la trappe de mes nichoirs. Imprimé facilement…
Print approx. €2.13–€2.60 excl. taxPreliminary estimate for PETGSource material: PET
Santa Skulls Christmas Tree Ornament #2
Print approx. €9.16–€11.19 excl. taxPreliminary estimate for one variant
Requires: One 42mm diameter pine dowel(length to preference). Two 3D printed wall brackets. Two 3D printed pole endcaps. Six 10g 45mm, self-embedding timber screws. Installation: Brackets: Pre-drill timber screws through PLA slowly to…
Print approx. €10.32–€12.61 excl. taxPreliminary estimate for one variant
Super cute German Shephard with a Santa hat! I have been very generous with the supports, so take care when removing them! (Particularly around the tongue). Props goes to the awesome designers who models I worked off of. Merry Christmas!
Print approx. €8.33–€10.18 excl. taxPreliminary estimate for one variant
A very simple incense stand for palo santo . Whilst the stand works for all palo santo pieces I've tried, I imagine the shapes and sizes can vary wildly. Please check the drawing prior to printing. Usage Press the piece into the grip…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Meet the Modern Santa Decor - Candle Holder — a sleek and elegant twist on the classic Santa Claus! 🎅 Height: 120 mm 🕯 Designed to fit the LED Flame Tea Light Candle (D37.2 × 36.6 mm) ✨ Features a modern voronoi-style body ❄ Perfect for…
Print approx. €5.93–€7.25 excl. taxPreliminary estimate for one variant
Saya pro kuchyňský nůž Tefal Santoku opatřena samolepicí magnetickou fólií tloušťky 0,5 mm. / The Saya for the Tefal Santoku kitchen knife is equipped with a self-adhesive magnetic film of 0.5 mm thickness
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for one variant
I made these for my wife who handed them out when she walked the Camino de Santiago in Spain.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
100x160mm sign, with pheasant art and text “have a day”. If people mistake the bird for a grouse, it changes the meaning totally… Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
Just a hexagonal catch-all tray that resembles a flower with nice rounded edges. Example model was printed at 80% size.
Print approx. €11.67–€14.27 excl. taxPreliminary estimate for one variant
Santa's footprint template; simply place on floor and sprinkle with flour or powder bringing Santa to life.
Print approx. €3.69–€4.52 excl. taxPreliminary estimate for one variant
A really neat way to display child's picture on Christmas tree. Use color change, MMU, or XL Sliced for 0.6 nozzle
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Multi color Santa's Face using single Nozzle with three (3) color changes.
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
100x160mm signs, with art of Santa and varied “Dear Santa” requests for presents: “nice and naughty is a spectrum” “please bring puppy, and take sister” “may i please have an elf?” i want a pony (and world peace) Mesh and Solid (may print…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
This is a remix of Santa Claus by sb43201. https://www.thingiverse.com/thing:2702723 From the orginal designer: "PLEASE remember this is a non-commercial license--make for yourself or as gifts to give-away to friends and family. If you…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
A quick print to add some festivity to small objects. Requires only a single filament change. There are two versions of the model, one with a built-in brim on the ball for easy printing and one that has no additional supports in case you…
Christmas Ornament – Santa’s Winter Village Scene Bring some festive cheer to your home with this beautifully detailed Christmas tree ornament ! This 3D print features a cozy winter village with snow-covered houses, pine trees topped with…
A Cute little 3d model I made for Christmas. Here's The Link For the filament I used! It Works Wonderful, and is only $13.98, Overture PLA Red: https://amzn.to/4i6sF2T If You have a Smaller Budget, Here's Some Super Smooth PLA from…
I have found 2 different Lego Santa models online and combined different components down to one model and scaled it to the approximately 40cm height (15.75 inches) I have used the model from this https://www.thingiverse.com/thing:3355544…
Here is: Christmas Wall Decoration - Santa Claus Geometric Design Fast and easy 1 color print. You can adjust the scale as desired, but be mindful not to make it too thin.
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Modern and minimalistic Santa decoration, fun and stylish deco for this year's christmas season. All parts can be printed seperately, no need for MMU. The body of santa has a hole on the bottom to insert an electronic tealight, which will…
This is a 3D printable file to get a component bender (CBH5). Series Description 0.3": 2 positions 0.4": 4 positions 0.5": 8 positions 0.6": 7 positions 0.7": 7 positions For bending of electronic components to a standard pitch size Base…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
If you like the model, please give a like 💟 and post your prints 📸. 💡 Prusa balance game - Darth Vader, Stormtrooper, Mandalorian, Yoda, Dwayne The Rock Johnson, Pinguin, Tux, Snowman, Christmas Tree, Gnome, Santa, Benchy, Pikachu,…
Here you have a cute pinguin with a santa hat. The white render picture shows the 3D model you can download here, the colored picture shows ONLY a painting recommendation. Would be happy to see your makes! It is partly AI generated and i…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Here you have Santa with sunglasses. The white render picture shows the 3D model you can download here, the colored picture shows ONLY a painting recommendation. Would be happy to see your makes! It is partly AI generated and i optimized…
Baby Penguin Love Sant Valentine Clay character kawaii 3D Model
Collapsable fidget Santa's hat. A cool Christmas decoration. It looks nice and is fun to play with. It's very easy to print. No supports, etc. When you print the hat in red, you should change the color to white on layer 106. Unless you…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Merry Christmas everybody! Apologies for taking so long to bring this one out, it has been a slightly busier month than usual. Riding on a similar theme to my popular Gingerbread House kit I bring you Santa Claus' sleigh, which of course…
Christmas baby Yoda - :) No AI was used in the making of this model. The image is a render based on the gcode from prusaslicer. Check it out on makerworld as well if you have a bambulabs 3d printer!…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
This small santa hat has a special trick: it balances! Printing Instructions (Standard): I recommend PLA with 0.2mm layer height, 5-10% infill, 2-3 walls, and no supports! Print as oriented. I printed in matte white PLA and colored the…
Here is: Christmas Wall Decoration - Santa Claus Fast and easy 1 color print. You can adjust the scale as desired, but be mindful not to make it too thin.
Elegant sleigh with built-in decorative elements. most of my hard work went to make sure you'll be able to print it easily - no supports or rafts needed, just a tiny bit of glue. I made 0.5 tolerances, so the parts should easily fit, even…
This is a stencil to create the sugar cross design the Almond Cake is famous for. The stencil is 10 inches tall so you would have to scale it within Cura to fit your cake pan. Additionally it has a raised area for easy removal after the…
This charming 3D-printed Christmas village features a cozy cluster of snow-covered houses nestled inside a crescent-moon frame. Detailed pine trees surround the tiny homes, adding to the wintry scene. Above the moon, Santa Claus and his…
Pictures of a 4 color print of both models. Easy print without supports . COMMERCIAL LICENSE AVAILABLE: https://patreon.com/3DPA Check out our other models . Your likes and downloads support more content. Happy printing!
The "Santa Claus Vase" adds a delightful touch of festive spirit to your holiday decor. Crafted to resemble Santa’s jolly face with a fluffy white beard and signature red hat, this vase brings a whimsical charm to any space. The textured…
Realistic photogrammetry croissant. If you want the model with textures you can find it on cgtrader.
Santa Hat to be printed with mmu. Don't try to print it to be glued, it won't work. Haven't printed this one yet but I don't see anything that can be a problem in PrusaSlicer. It's meant as decoration not to be worn but you do you XD.
https://www.buymeacoffee.com/maxt ---------------------- 3D print with 5 different houses that can be placed in a window. You have the possibility to change the houses and rotate them in whatever way you please. The houses can also…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
3d miniature of Los Santos, from GTA V. Model created in Blender using the openiv software. This version is still a test phase, I will try to release a V2 that goes to fix the division of sectors, so as not to leave pieces too small to…
This Santa hat will put you in the Christmas spirit and brighten up the look of your Dummy 13. I recommend printing with supports to get the best print quality. Merry Christmas!
Here you have a really cute Santa Clause. The colored picture shows a painting recommendation. The white render picture shows the 3D model you can download here, the colored picture shows ONLY a painting recommendation. Would be happy to…
Christmas Door Trim Corner - Santa claus🎅 ⛄Ciao sono il pupazzo che vedi nella foto, sarei molto contento se metti un like e scarichi il mio progetto per un grandissimo supporto👍 ⛄Hi I’m the puppet you see in the picture, I would be very…
If you like this model check my other stuff, check out my www.patreon.com/wekster or my youtube channel www.youtube.com/wekster
Happy printing. Print Settings Supports: No Category: Art
I modified the Santa hat by Rok Bukva to fit on top of the 3D Printy snowman fidget. The hat is designed to have a lip over top of the head to help define it a bit more from just appearing like a part of the snowman head, incase you…
Its a Rubber Ducky with a Santa Hat! Its a remix of a rubber duck from https://www.printables.com/model/68384-duck-duck-gray-duck/files. a remix of Santa Hat from https://www.thingiverse.com/thing:5330 **update added a version with solid…
Can be printed without supports but I tend to keep them on. Printed on modded cr-10 0.6mm nozzle 0.2mm layer height top/bottom layers 6
Easily printable without support and attaches to a European style tow bar with a ball of 50mm. Color can be printed by manually changing filament while pausing print at specific height or in a Tool Changer, MMU or other multi material…
Santorini is a 2-4 player board game that's almost completely made out of 3D shapes that stack on top of each other, which makes it perfect to 3D print. You can find the official rules of this game here:…
A Snowman I will be printing for my sister because she specifically wanted a snowman without arms but with a Santa Hat. Scarf v2 and v3 now available Can be printed without the scarf if you don't want it. Hat Brim v2 hole is now 15.4mm…
Christmas Cookie Biscuit Gingerbread Cutter (approx 55 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
Santa Sleigh & Reindeer Christmas Decoration
Gifted to the Moses Family by Nick Dimelow (@bugman_140) - Santa Boot! We wanted to share this with everyone who participated in the BMR 2021 Christmas Community Print Drive! Thank you! It was such a huge success, and I can't wait to see…
A remix of our favorite 3d printed frog, Fred! The original print is on, ahem, another website, but allows remixes and oh boy, some of the remixes this frog gets! We wanted a Christmas frog – and a hat that prints without supports.
Print two copies of the SleighFrame and one of the SleighBody. I may add a draft to force a stop, but the Frame fits both sides of the Body. Print instructions Category: Vehicles Summary Print two copies of the SleighFrame and one of the…
Miniature of Real Madrid stadion Print Layer high: max 0.3 mm infill: 15% material: PETG, PLA
A festive articulated dachshund figurine made from brown filament, 3D-printed and posed lying down on a clean white background. The dog features segmented joints for flexible movement and wears a red and white Santa hat, adding a cheerful…
Cute Christmas themed earrings. Can be printed on any printer - no multicolor needed! Just print the 3mf elements separately in the following order: red base black shoes white beard pink/beige nose Layer height should be 0.15mm. It is…
This is a remix of a remix. This planter captures the essence of Santorini, Greece. The drains in the bottom of the planter will drain directly into the pool, filling it. This can be printed with no supports! I added authentic looking…
Santa Claus cookie cutter made from drawing from the internet. Sharp edges and clear details.
Bring the magic of Christmas to life with this charming minimalist Santa Claus design, crafted to add a modern yet cozy touch to your holiday decorations. This unique 3D printable model perfectly balances simplicity and festive cheer,…
10/01/2022 added 2 more cubes for more challange … Voron_test_cube_30x30mm Voron_test_cube_25x25mm 3 Section of 40x40mm Rotatory cube 40x40mm keychain Tolerance inside of 0.3mm (40x40mm one ) Test some overhanges / flowRate / bridges…
Check out all versions & support my work! HERE DESCRIPTION Santa is back in town! This cute christmas miniature will warm your heart and bring a smile on your face. Just make sure he doesn't steal your christmas gifts! Print santa in…
![Palo Santo Incense Stand [r.2]](https://media.printables.com/media/prints/edc33b8f-d399-4e49-ac52-5c47836b719a/images/11701418_c0ef9225-8faf-41dc-93ef-3c2d1e321b50_c845132f-ca70-4dd5-8739-afd013bfac7f/20260111_140627-photoroom.png)
