165 models
Our elf on the shelf will be baking cookies this year, but of course the cookie cutters have to be the right size ;). To make sure that this can be printed cleanly, I didn't want to simply scale large cookie cutters, but designed…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
A kingdom for a sausage! Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE The supportless lizard mount seen in one of the images is available…
Print approx. €2.60–€3.17 excl. taxPreliminary estimate for one variant
Keksausstecher für Ostern (Osterhase + Ei) Cookie Cutters for Eastern (Bunny + Egg)
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for one variant
Meet Mini Sausage Buddy , the tiniest sausage with the biggest personality! 🌭✨ ✅ Ultra-Lightweight & Tiny – Weighs only 0.22 grams! ✅ Perfect for Desks, Shelves & Collectibles – A hilarious addition to any space ✅ Fast Print Time – Prints…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Makes an umbrella shaped cookie
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
Drucken Sie es in ABS für Flexibilität und Spülmaschinentauglichkeit. Keksausstecher mit Konturen ( Akita Inu )
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
Passend zur Vorweihnachtszeit kommt hier ein Plätzchen- bzw Keksausstecher in der Form eines Labubus. Natürlich kann man ihn auch außerhalb der Weihnachtszeit verwenden ; ) Es sind keine kleinen Teile verbaut und der Ausstecher ist…
Print approx. €1.54–€1.89 excl. taxPreliminary estimate for one variant
A print in place model of a sausage dog with a keychain loop. Watch the sausage dog dangle from a keyring! The model is connected together with 4 independent parts linked together by a print in place interface. Scale this up or down…
🔒 This model is protected by copyright. If you want to use or sell physical prints, please check the paid subscription here: https://www.patreon.com/cw/Nieuchronny Meet the Dachshund Slinky , a fun and fully articulated dachshund inspired…
The Sausage Keycap is an FDM-printable, Cherry MX-switch-compatible, comically-proportioned sausage that you can put on your keyboard. The profile is based on the DSA profile, but it doesn't look out-of-place when taking the place of a R4…
Don't forget to also make Articulated HotDog for them! There are in total 4 slightly different versions: 2 long versions (8 segments) and 2 short versions (6 segments). Each length is available in both Curved and Straight variants. The…
A print in place model of a sausage dog without supports. The model is connected together with 4 independent parts linked together by a print in place interface. Scale this up or down depending on your requirements and imagination! The…
Delight your baking adventures with this quirky 3D-printable cookie cutter featuring a wiener dog snugly nestled in a bun, topped with a squiggle of mustard. This fun design combines humor and charm, perfect for cookies, fondant, or…
🧙 Moderner Wichtel Keksausstecher Ein moderner, stilvoller Wichtel-Keksausstecher für die Weihnachtszeit! Perfekt geeignet zum Ausstechen von Teig – der klare Kontur-Look sorgt für schöne, detailreiche Ergebnisse. 🧁 Merkmale: Modernes…
The ready-make fix for your automatic Milwaukee Caulk Gun that just broke its nozzle because it fell on the floor… Print with ABS, PETG or similar material at 100% infill with 3-6 perimeters and auto supports enabled and generated. If the…
Your BOOST helps me continue creating unique designs and share even more free models for everyone to enjoy! 🚀 Meet the ultimate snack-time companion – a hot dog that barks instead of sizzles! This cute little pup is curled up inside a…
Model ist ca. 7cm hoch. Funktioniert gut, kleiner würde ich aber nicht drucken, die Wandstärken sind etwas knapp und zum Ausstechen hin werden sie kleiner. Gedruckt in PETG, Schichthöhe 0,15mm
Beautiful cookie cutter
Kurzbeschreibung Stylisher Wichtel-Ausstecher mit weichen, teigfreundlichen Konturen – keine engen Zwischenräume, saubere Kanten, super Griff 👍. Perfekt für Plätzchen zur Weihnachtszeit ✨. Maße: 44 mm × 70 mm × 15 mm Druckempfehlung 🖨…
Einfach zu drucken, kein Support notwendig Alternative Namen: Linzer Auge Linzeraugen Linzereye Linzereyes Cookie Cutter cookiecutter cookie cutters cookiecutters
Größe um die 5 cm, skaliere dir deinen Keksausstecher nach deinen Wunsch! Frohes backen! 🍪🥯 mein anderes Kekse Set! Size around 5 cm, scale your cookie cutter to your liking! Happy baking! 🍪🥯 my other cookie set!
Simple ring and press to create uniform burger or sausage McMuffin patties. Size is just larger than a standard English muffin, when cooked the pattie will shrink to fit the muffin.
I looked high and low for an articulated sausage, and, finding none, I designed my own. An easy print, no supports needed. 120mm tall. Legs wiggle and wobble.
Works for most “sausage” stile caulk gun, the nozzle hole is 39 mm and the thread is more or less 62 mm. I suggest printing in asa, abs, nylon or similar for better toughness I used asa with 0.12 mm layer height
🎄 Grinch Keksaustecher – Perfekt für Weihnachtsplätzchen! 🍪 ✨ Highlights Saubere Prägung & klare Konturen Optimiert für 3D-Druck (kein Support nötig) Getestet auf mehreren QIDI & Bambu Druckern Perfekt für Weihnachts-Backaktionen 🎅🦌 📌…
My original post and print settings on makerworld with many exclusive models. Holder for your McDonald's menu/ combo. Should fit to most car vents, although only tested for Skoda Rapid. No supports needed. Commercial licence & support:…
I made this cookie cutter as I haven't found any Koala one on the web … :-) Based on a Vector File by catalyststuff on Freepik.com
Say hello to the Wiggle Sausage Dog, a chunky little dachshund with a full body that flexes and wiggles just like the real thing. It prints fully in place, so there's no assembly and no fiddly parts, just satisfying segments that move the…
This model is compatible with the lego system.
Meet the Salsache Dog! 🐶A fun and flexible articulated dachshund model – perfect for fidgeting or just showing off your print quality. Printed in one piece, no supports needed 1 - keychain flexi sausage dog 1 - flexi sausage dog i hope…
Hiermit könnt Ihr Kekse in Otterform ausstechen :)
Here is the file for the DogSausage. a friend of mine has a sausage dog and happened to mention that people now always give her SausageDog themed gifts, I promised that I would never do such a thing……..so the DogSausage was born. 😁👍 I…
I made this for my Tupperware meat grinder. I guess it might work on other brands too. The meat grinder end is 57mm in diameter. PETG. No PLA, unless you dont plan to reuse it. I've printed it in clear petg, so that I can see whats going…
My daughter got a dollhouse for Christmas. And because no accessories were included and the Barbies were hungry, I quickly designed sausages in Freecad. The scale should match the Barbie dolls Meine Tochter hat Zu Weihnachten ein…
Cute 3D model of a Dachshund, perfect for decorations, gifts, or dog lover collections. Designed for easy and clean printing on FDM and resin printers with a stable pose and smooth details. Scales well and may require minimal supports…
Fast and easy print. cookie cutter for Christmas cookies. Famous german Spitzbuben.
I designed two sausage filling funnel for my manual mincer, in two different output size. Output diameters are 34mm and 28 mm. Check the drawing for the machine side dimmensions.
Hello friends from all over the world :) This is my contribution to the cookie cutter contest. In Germany, in the winter time there is this gingerbread mix, called “Herzen, Brezeln, Sterne" available in every grocery store. With these…
A cookie cutter shaped like a christian cross. Ein christliches Kreuz als Keksausstecher
Cookie cutter for the logo of the German scout association VCP. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0.2 Infill: 0% Filament: --- PLA Category: Household Supplies
Add on for meat grinder to fill sausages. Size can be adjusted. Source code contains samples for notches and noses to make it fit on any grinder. Wurstfüllaufsatz für Fleischwolf. Größe kann angepasst werden. Der Soucecode enthält…
Ein kleiner Rabe Socke Keksausstecher, gedruckt in PETG Schichthöhe 0,15 mm. Kleiner würde ich nicht skalieren, Höhe ca. 7cm Die Wandstärke zum Ausstechen ist nur noch eine Linienbreite.
Größe um die 5 cm, skaliere dir deinen Keksausstecher nach deinen Wunsch! Frohes backen! 🍪🥯 sieh dir auch mein anderes Kekse 6er Set an! Size around 5 cm, scale your cookie cutter to your liking! Happy baking! 🍪🥯 also look at my other…
These are the parts necessary to motorize your 15lb hakka manual sausage stuffer. See the YouTube video linked below for detailed instructions.
A cutter for two layer cookies.
Der Teig muss min. 5 mm dick sein.
Trancheuse / Guillotine à saucisson : Il vous faudra une lame de cutter seccable (18 mm de largeur), une petite rondelle (ø 15 mm maxi) et une petite vis pour plastique (ø 2 mm) pour tenir la lame de cutter. Guillotine / Sash sausages :…
Ein Keksausstecher für stolze Österreicher oder jene die das Land mögen. 👍😁
cookiecutter in the shape of Ukraine with the slogan "Make Cookies not War". Send a tasty message for peace in Ukraine! Works with PLA and PETG, watch out for FDA conform filament 205-215°C
A sauce holder in a soft packaging. Two sizes: v1 - for small sauces (Heinz mustard, cheese, etc.) v2 - for medium-sized sauces, typically mayonnaise or ketchup. See photo.
THW (Technisches Hilfswerk) Cookie Cutter. Consists of two parts: the Cookie Cutter with the outline of the logo the logo stamp, which fits in the Cookie Cutter to imprint the logo. Try to use a dough with (almost) no backing powder.…
My son wanted a golden salami sausage printed, so I remixed an existing model to create a whole sausage design. This 3D printable salami sausage is divided into two parts that can be easily glued together after printing. To bring this…
Hammer and Pickaxe – The Symbol of Mining as a Cookie Cutter This cookie cutter design features the traditional symbol of mining: the hammer and pickaxe (Schlägel und Eisen). These crossed tools have symbolized the hard work and…
🧙♂ Moderner Wichtel Keksausstecher – 3D Druck Modell Ein moderner, stilvoller Wichtel-Keksausstecher für die Weihnachtszeit! Perfekt geeignet zum Ausstechen von Teig – der klare Kontur-Look sorgt für schöne, detailreiche Ergebnisse. 🧁…
This is an adapter to allow filling sausages using the meat grinding accessory for the Bosh MUM5 kitchen robot. There are two sizes to fit smaller or larger membrane diameter. You need to print the disk which replaces the meatgrinder disk…
Cute and clean 3D model of a Dachshund (sausage dog), perfect for decorations, gifts, or pet lovers. Designed for easy printing on both FDM and resin printers. Ideal as a desk figure, ornament, or collectible. Scales well and requires…
4-piece sausage stuffing horn pusher. I made this to clear my set of sausage horns after stuffing into casings. The end caps measure just under the diameter of the set of horns that I own - 10mm, 13.5mm, 17.5mm, 21.5mm. Only the two…
This device is for pricking the skins of sausages and salami to remove air pockets. Insert 6x dressmaker pins into the threaded plug. Using epoxy or other suitable glue, glue the plug into the handle. You may want to screw on the end cap…
Auf Wunsch meiner Schwester habe Ich diesen Keksausstecher designt. Und da es bestimmt noch mehr Fans dieser Mannschaft gibt, stelle Ich Ihn gerne zur Verfügung. Die Grunddatei ist etwas klein geworden aber die Größe kann im Slicer…
A friend asked me to remix the well know cali dog and make it a 'bit' longer. So I did! This sausage-style cali dog is 6 cm. I can upload other lengths if there is interest.
Cute 3D model of a Dachshund, perfect for decorations, gifts, or dog lover collections. Designed for easy and clean printing on FDM and resin printers with a stable pose and smooth details. Scales well and may require minimal supports…
Centerpiece for a dipole antenna, 5mm coax cable (RG-58) and various rod sizes (4,5,6mm). There is plenty of space inside for the wiring. The generous size also makes it pretty sturdy and has no problems to support long/heavy poles (2-3…
The soft 'sausage' packed (600g) adhesives and sealants are significantly economical than usual the 300 ml cartridges. Though the sausages require the dedicated caulk gun, those typically can habit cartridges and the soft sausages with…
Print in place 3MF file has additional perimeters added for maximum stiffness.
WORST MAGNEET SCENARIO A fridge magnet shaped like a sausage. This was one of the capsule toys I made for the BASCHZ LEEGT!! exhibition during Feest Der Leegstand (literally "Feast Of Vacancy") in Schiedam in 2017. It came from the old…
Works with Philips meat grinder. This is the prototype, I'll come back later with feedback regarding material resistance and how it works. Print instructions PET 0 infil
It's for Outdoor Party to get a Glimp on what the SENF is used for can be printed as it is NO support FDM thee is just a gap for the GLAS use 0,3mm Color change as you like HAPPY Party
Weihnachts-Keksausstecher mit Stempel „XMAS“ Dieser festliche Keksausstecher besteht aus zwei Teilen – einem Ausstechring und einem Stempel . Mit dem Stempel wird das Motiv („XMAS“ mit Rentier, Sternen und Schneeflocken) sauber in den…
For my son to play with i created a saus botle. I've printed one in yellow (mayonaise) and one in red (ketchup).
Sollte funktionieren, bin nicht zum testen gekommen, wurde wie meine anderen Ausstecher in 0,15mm gedruckt und ist zum Ausstechen hin spitz zulaufend. Auf dem dicken Rand liegend drucken, dann funktionierts. Gedruckt in PETG
Cute 3D model of a Dachshund, perfect for decorations, gifts, or dog lover collections. Designed for easy and clean printing on FDM and resin printers with a stable pose and smooth details. Scales well and may require minimal supports…
🎄 Moderner Tannenbaum Ausstecher – Minimalistisches Weihnachtsdesign Dieser elegante, moderne Tannenbaum-Ausstecher bringt stilvolle Weihnachtsstimmung in deine Küche! Perfekt für Plätzchen ✅ Saubere, geschwungene Linien ✅ Modernes…
I believe that every sausage should have the right to robotic arms and legs, so I took the first step in creating prosthetics for sausages, I also did a small operation on the sausage, now it has eyes and a mouth! Now it's not just a…
To help with the filling of a sausage roll, my wife needed assistance to keep the fill in position and a way to compact it. Here is my fill and compacting tool to assist with the fill process. The mold is a frame of 110 x 40mm and 36mm…
Ein Keksausstächer in Ottifantenform. Bisschen filigran, aber hat ganz gut funktioniert. Gedruckt hab ich mit Prusament PETG und dem Standard PETG profil mit 0,2mm deatail im Prusa slicer. Gedruckt auf meinem Prusa i3 mk3s+. Vor anwendung…
Cute 3D model of a Dachshund, perfect for decorations, gifts, or dog lover collections. Designed for easy and clean printing on FDM and resin printers with a stable pose and smooth details. Scales well and may require minimal supports…
Keksausstecher in Wolkenform, ca 6,5x4cm, Wandstärke 1,2mm, am besten in PETG drucken und nehmt eine knallige Farbe (wenn was abbrechen sollte seht ihr es sofort im Teig! ;) )
A cookie cutter based on the logo of the "Omas gegen Rechts" (Grandmas against the Right-wing). Perfect for community events, rallies, or simply making a statement at the coffee table! This design was created using the official SVG…
A boat outrigger compatible with Lego Technic parts. Ein Bootsausleger passend zu Legotechnikteilen
Ein Keksausstecher in Herzform verleiht deinen Keksen die gewisse Romantik. Ganz egal, ob als Liebesbeweise, Überraschung oder für den Valentinstag. Überrasche deine Liebsten mit einem wunderschönen, selbstgemachten Keks.
Sausage Stuffing Tube Replacement for meat grinder. It is a suggested single use only due to chance of holding bacteria within pores of the plastic. Measurements: Base Diameter 37.4mm / 1.47" Base Thickness 1.82mm / 0.72" Tube O.D. 26.0mm…
The Twitter Logo as Cookiecutter I made this Model with https://app.cookiecad.com/
0,2 mm Schichthöhe 3 Wandlinien 15% Infill
Print with 20% infill Perimeters 2-3 No supports Place flat on the bed Recommended PETG but PLA works too.
Finding myself unable to get a new sealing from the dealership in time, I made my own sealing for the clutch actuation cylinder. Printed with TPU filament. My aim was a temporary solution to get the bike running, but it works perfectly…
This suite of sausage stuffer tools are designed to get the remaining meat into the casing and through the horn. This fits the Hakka 3L manual stuffer. The interface will screw onto the nut that holds the horn (and casing) in place and…
This thing holds your sausage while you are driving. :) It has a little “drop stop” at the bottom which you can fill with mustard if you like. The included STLs are good for “Bockwurst” and “Pfefferbeisser” type sausages with a diameter…
Attention! The maximum diameter of the sausage is 20mm . People with bigger sausages need to scale up the model!! Print both models without supports and glue it together.
Ever had a Salami or a Polnische (poland style sausage) with way too much moisture and way too less flavour? I got you covered! With this (clunky) Wurstgalgen you could dramatically increase the flavour and texture of your favorite Wurst!…
Für Eriba Feeling Fans
Safely slice any round object accurately! Great for slicing hotdogs for babies!! slice along the fingers and once down the middle and boom safe hotdogs!
VW Multivan California Coast Ocean Lüftungsauslass für Standheizung unter dem Kühlschrank in zwei Varianten mit Mittelsitz und ohne Mittelsitz. Es handelt sich hierbei um zwei Prototypen. Feedback oder Weiterentwicklungen sind erwünscht.…
This was a request from a user; I have NOT tested this for size; the model is based on my tray part and is close to within a 0.2mm or so, but all sizes are based on the top of the tray and the model was not created with a draft (as was…
Dank DIYSlaps Tinkercad Cookiecutter generator, konnte ich mit Tinkercad diese Keksausstecher mit selbst bearbeiteten Vektor Grafiken anfertigen. Tiere, die ich auf dem Weihnachtsmarkt noch nicht gefunden habe. Ich hoffe, sie bringen Euch…
The VOM dogfood sausage holder is for defrosting the sausage overnight in the fridge. This helps to minimize the space that is taken in the fridge, while also collection all the condens. No supports needed. Size: LxWxH = 200 x 65 x 34 mm…
Designed this for My Lem #8 Meat Grinder. It did not have a Stuffer for Sausage, so I designed this you may need to make some adjustments. I printed it all, with No supports Needed. Feel free to remix, but I would appreciate letting me…
