50 models
Case for X-Sense Smart Home base station SBS50 for smoke detectors and leak sensors The model is a case for wall mounting an X-Sense Smart Home base station SBS50. It has a cutout on the bottom for the USB port and a hole for pressing the…
I was looking for a Parkside 20V green series tool holder, but I didn't like any of the ones offered. Except for the idea for a 12V version by author (DocNo) Thomas Bisani. So I made a series of 20V in this design and I am finally…
The Park Tool SBS-1.2 comes with every basic bit and socket you need to repair your bike, but no portable storage solution. Here is my attempt to remedy the situation. I tried to make an ergonomic design while keeping it as simple as…
Univerzalni drzak na vrtacku, razovy utahovak. Parkside zelene do toho pasuji. I svitilny na Parkside baterie.
The park tool SBS-1.2 set comes in cardboard box. This is a remix Whity's parametric rugged box with a magnetic shadow box to house the set plus the FR-5.2GT BB tool. Perfect complement to the torque wrench. Uses 10x3x30mm magnets on…
All parts prints without support. In 0.2mm Layer hight. There are different Versions of the lid: HmIP-USBSM_Box_TOP: LEDs are hidden. HmIP-USBSM_Box_TOP_LEDTube: Includes Tubes for the LEDs HmIP-USBSM_Box_TOP_LED3mm: Includes 3mm Holes…
Stock, Handguard and other parts for the SBS SLAB. Also a bunch of info to make your own, listed in random order. -Only 2 c4 and t4 bars are required for assembly. 2 12 inch threaded rods (10-24 or 10-32) are used. -The pins for the…
Wandhalterung für die SBS50 mit Kabeldurchführung nach unten.
Check out the original design here. How I printed it: PolyTerra PLA (White) 10% Box Hatch Infill (5% Gyroid should also be more than rigid enough) 0.28 Layer Height You can also add silicone or TPU feet underneath to make it more secure.
I created my own keyboard stand model from scratch taking inspiration from Clackify's design, that fits within the print dimensions of the Core One L. Features of this design: Three ~150mm deep layers with ~50mm space between each layer…
The other parts will need to be downloaded from the original slab posting or other modified parts of your choosing.
The rack is compatible with pipetting robots like Opentrons OT-2. With the Opentrons systems, you can use the standard Falcon 6x15 mL Conical lab-ware definition. Still, lab-ware position calibration is advised. The tubes are kept firmly…
If you like and want to help me : By me a coffee https://www.buymeacoffee.com/tcatca I made some minor changes in the original design to fit with my version of parkside ( france).…
Clip-on top cap for the SBS mod Stratum Balance V2, featuring one or two window to view the liquid level in the tank, also facilitating the passage of air.
An adjustable race mag pouch mount for the Modular Segmented Shooting Belt System. Likely able to work with normal full sized belts as well. Everything is held together using M5 sized screws and M5 heat set inserts. Race Mag Pouch Design:…
Conforms with low-profile SBS dimensions. The openings are 5x5x1 mm, leaving enough space for tape to stick on both sides and annotations/markings. Stackable with itself and all commercial plates I had around. The colored labels are…
This is an Electronics Super Power Supply. It's created from an old PC Power Supply Unit. 2 volt/amp https://www.aliexpress.com/item/4000848952255.html?spm=a2g0o.order_list.order_list_main.2320.4ff01802xx4taL One LCR Meter ( LCR TC1 1.8"…
Adopted X-Sense SBS50 Wall Mount for t-clip mounts for the IKEA SKÅDIS pegboard. I used the low profile t-clips https://www.printables.com/model/472294-skadis-t-clip-system-low-profile-flush-mount-clips A tool, such as…
A pot for a hydroponic system to hold a rockwool cube. Designed towards the grodan SBS36 that I use. It fits snugg and tight so that the Plant doesnt fall sideways gaining laverage over the pot potentially destroying the pot. The bottom…
Since I always have my keyboard around and in the same place, I figured I could use it for organization. I noticed that I found the wrist rests to be really uncomfortable and it felt like they didn't support me. I somewhat solved that by…
This case hex bit holder is remixed from Customizable Hex Bit Holder for: Parkside PABSP 20-Li C2 Parkside PABSP 20-Li C4 Parkside PSBSAP 20-Li B2 Category: Hand Tools
This adapter accomodates up to 5x 100mL troughs from Tecan ( part number 10613048 or equivalent). The adapter itself is placed on any SBS-compatible site of the robotic worktable. I designed this adapter specifically to be used with the…
I AM NOT ASSOCIATED WITH PARK TOOL - I AM JUST A RANDOM BIKE MECHANIC Did you purchase a set of 3/8" drive sockets from Park Tool and you don't like the JH-3 organizer they sell? Here's a set of organizers to store all of them sockets!…
The labels are rendered separately for optional multicolor-printing. This could be used as a starting point to develop a custom plate, or just as an engineering dummy. If the stackable version is used, it needs supports on the build plate…
Add a layer change to make it look just like the logo! Pardon the crappy print, all I have currently is my Dremel 3D40!
Clip de rechange pour support de téléphone Modèle SBS Air-Vent Car Holder
I was tired of the provided cheap holder being in my toolbox taking up too much space.
I found more holders, but they all limited my hands' reach - maybe I just have big palms? On the 38th layer, 3x8 round magnets are inserted.
Holds 7 standard 5 mm NMR tubes horizontally (tubes will stick out on the right side), and 12 capillaries (roughly 80 mm length) vertically. There is a thin wall in the bottom to prevent the capillaries from falling out. This wall can be…
There are magnetic slots for standard hex bits and two outfacing magnets to hold drill bits or screws. It is attached to the drill in stead of the belt clip and uses the same screw. When slicing you will need to pause the print at the…
I created this design for my ParkTool SBS-1.2 Socket and Bit Set rugged box case. The size is made specifically to be able to print the box in A1 mini or any printer with smaller capacity. The original box the came with the ParkTool…
The magazine pouch link for the MSSBS over on MakerWorld were sized for Teklok clips. When used with Ghost pouch clips, there was wasted space and a tendency for them to move within that space. This is a resized link remixed from the…
This model will help clean the clutter on your desk thanks to the solid base that fits 4 microSD cards and 3 USB drives, while in the front two flexible pieces help you easily organize a handful of cables without any hassle: just push…
Es un tarjetero de escritorio con tapa para guardar de forma ordenada las tarjetas CF, ademas tiene espacio para dos USBs
Pierce Rapid Equilibrium Dialysis (RED) plates from ThermoFisher Scientific can be very useful for automated microtiter plate scale dialysis in high throughput applications. Unfortunately, their footprint does not appear to be fully…
I made this from PETG on Bambu X1C. The model was made to work with the Samsung LF27T370F monitor. The crucial parameter is the vertical clearance below the bottom edge of the monitor which is 99mm. Feel free to modify the provided STEP…
This 3D-printable adapter set (four pieces labeled A, B, C, and D) securely holds SBS 96-well plates and deep-well blocks on the Bio-Rad BioFrac fraction collector tray. Designed for seamless compatibility with the standard 96-well plate…
arm for extending the length of car holder for tablet 2x lengths - extend by 137 mm and 117 mm
Replacement bracket for Güde GSBSM 450 oscillating belt/spindle sander. This bracket holds belt assembly straight when moving up and down. It is same as original, I have added retaining wall for nuts for easier installation. Made for Güde…
The original back cover is made of PA6, most of the glues fall off.. and I needed magnetic holders on the drill. There is a 4 bit holder on the top, 5x2mm (4) magnets can be glued inside. 10x2mm (6) and 5x2mm (8) magnets needed and some…
A custom-designed 90° drill guide tailored specifically for the Parkside PSBSA 20-Li C3 cordless hammer drill. It helps you keep your drill perpendicular to the surface when you need clean, straight, and precise holes without using a…
The magazine pouch link for the MSSBS over on MakerWorld were sized for Teklok clips. When used with Ghost pouch clips, there was wasted space and a tendency for them to move within that space. This is a resized link remixed from the…
I was tired of the provided cheap holder being in my toolbox taking up too much space.
Google Cardboard kit for Google Pixel 9 Pro XL is designed for the phone including the standard silicone case. (167x83x14 mm³) You can view VR SBS content like generated from the Google Cardboard app with it. The lenses are 25mm diameter…
Maximum atomizer diameter: 23.5mm No support needed (the STL file is in the correct orientation for printing) Printed in PETG with a 0.25mm nozzle, 0.12mm layer height I recommend placing the seam line in the back corner (see screenshot…
Yet Another Stick Blender Stand. This one is for my Bosch ErgoMixx. Of course you can download *.f3d file and make your own remix in fusion360. Easy to print, no need for support. PLA worked for me, but any filament with strong binding…
Gridfinity compliant USB-A holder with 10 slots. 2x1x3, stackable
