Nativity Scene
Nativity Scene from scan of decoration.
Print approx. €29.63–€36.21 excl. taxPreliminary estimate for one variant
- Downloads
- 3,418
- Likes
- 506
- Rating
- 5
1,849 models
Nativity Scene from scan of decoration.
Print approx. €29.63–€36.21 excl. taxPreliminary estimate for one variant
Scandinavian Nativity Scene Blacksmith The Bible doesn't mention a blacksmith at the birth of Jesus, so why is he there, hammering away next to the shepherds and the Magi? 1. The Power of "Everyman" The Nativity scene tradition,…
Print approx. €5.98–€7.31 excl. taxPreliminary estimate for one variant
This is a simple set of instructions for how to reproduce the dividers I have built to organize my Descent Legends of the Dark game. This is a slight remix of the work initially done by dukefanblue2005 , my hope is twofold. First, the…
Print approx. €5.31–€6.49 excl. taxPreliminary estimate for PETGSource material: PET
Christmas nativity scene house, purely just a house, it is necessary to install figurines. I will finish the figures later and then release them as a set, so watch this model. The model is stored both individually and as a whole, you can…
Print approx. €2.87–€3.51 excl. taxPreliminary estimate for one variant
Its a Bookend for Bookworms or fans of the Light Novel/Manga/Anime Series: Ascendance of a Bookworm By Miya Kazuki
Print approx. €6.38–€7.79 excl. taxPreliminary estimate for one variant
kolíček pro zajištění vlasce žaluzie v rámu okna
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
My effervescent tablet tubes kept falling over on the shelf, so I just needed something simple to keep them standing up. I remixed an egg holder to fit the purpose, allowing me to add as many holders as I need in various configurations. I…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Wkładka /Adapter do montażu dysku SSD 2,5 cala w komputerze, gdzie był zamontowany dysk HDD 3,5 cala
Print approx. €3.11–€3.80 excl. taxPreliminary estimate for one variant
Compatible with the original CFT1 v1, Half Upgrade, and the v2. Use v2 models for Half Upgrade and v2 radio. The v1 case provides a slightly more compact case for the original CFT1 but will not work with the Half Upgrade or v2. The v2…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for PETGSource material: PET
Průchodka vlasce proti jeho předření přes plechování žaluzie
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Under-the-table mount for sd card readers similar to the Transcend TS-RDF8K. The newer versions seem to have the same outer dimensions so they should work just fine. If you need one of my things printed or you want to suggest a…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
This is for Transcend SD-card reader. I don't know, if it fits to anything else.
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
3D model of Rozemyne from light novel part 4 of Ascendance of a Bookworm (Honzuki no Gekokujou) Used MMU painting to make this model. Colors needed are Black, White, Yellow/Ochre, Tan/Flesh and Midnight Blue Print upside down with tree…
Print approx. €36.26–€44.32 excl. taxPreliminary estimate for one variant
The model only needs supports on the free-hanging fins of the rocket, otherwise it prints support-free. The bottom of the scepter has a 26mm hole, so it should fit on (at least to my knowledge) standard broom styles. If not you can scale…
Print approx. €5.07–€6.20 excl. taxPreliminary estimate for one variant
Lisca di pesce per avvolgere vari cavi. Stampato in PLA in 45 minuti riempimento al 10%
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
I designed a table mount for Transcend HUB3 ( https://www.transcend-info.com/Products/No-402 ) Fits the hub perfectly and the design includes small screw holes for mounting the holder under the table. No commercial use, remixes allowed…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
The model consists of five main components, each serving a crucial role in the assembly process. These parts include the TPU tip and wire cover, the ABS fan and exhaust tube, and the PETG tube. Due to printer limitations, the chosen…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Drawing of Ferdinand made by user ALOS . Made using HueForge. Print Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Swap Instructions: Black until layer #10 at 0.92mm Dark Gray until layer #19…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
G-ode for creality Ender 3 with a BL-Touch / To put on the wall you need 2 screw of 4mm of diameter
Print approx. €5.76–€7.04 excl. taxPreliminary estimate for one variant
Printed with 0.15mm layer height, fuzzy skin on outer layers with grey extrudr NX2 PLA.
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for one variant
A truly extraordinary decorative object. A moon with a small bowl attached for flowers and decorations. Standard size: 230x230x90mm. Easily scalable smaller or larger if required. A truly extraordinary decorative object. A moon with a…
Bring the true spirit of Christmas into your home with this elegant and minimalist Nativity Scene. Designed with soft, flowing lines and a modern artistic touch, it captures the most peaceful moment of the season — the birth of Jesus — in…
Hi Folks, We may not be fully in the Christmas season yet, but many of you are already starting to plan and produce for the holidays. So, it’s time for Deltaprints to start ringing those Christmas bells as well! 🎄 Over the next few weeks,…
These are the housing files for the (tr)uSDX Radio. Print in PETG / 0,15mm Layer Height / 20-25% Infill Tap (cut M3 Threads) into upper/lower Wall before putting inScrews. UPDATE - 11 July 2022: Added new Bottom Cover for Slide On Battery…
A decorative crescent moon with an integrated elliptical plant pot. This further development of the very popular first model saves material and printing time while delivering clean print results. Printable also without and with supports.…
I used PLA filament for the model! Print: Nozzle 0.40 mm Layer height 0.2 mm Set the maximum print speed to 80 mm/s in the Prusa Slicer. Ich habe für das Modell PLA Filament verwendet! Druck: Düse 0,40 mm Schichthöhe 0,2 mm Im Prusa…
Description With Christmas coming, and so many "Baby Yodas", I put together a Christmas manger scene starring our favorite characters from Disney+'s live action Star Wars series "The Mandalorian". I did a lot of clean up work on some of…
Christmas Ornament – Santa’s Winter Village Scene Bring some festive cheer to your home with this beautifully detailed Christmas tree ornament ! This 3D print features a cozy winter village with snow-covered houses, pine trees topped with…
Crescent moon-shaped vase with eid mubarak written in Arabic. Here is the list of variations: There are plain and Islamic patterned versions. There is a version that is not a vase. There are versions for bigger holes for texts for…
Add some Christmas cheer alongside the starfighters and aeroplanes hanging from your tree, or even just chuck it on your mantlepiece! A kit I made back in 2020 , which for one reason or another didn't upload along with the others!…
Mountain Scenery Wall Art
My takes on the Characters, NPCs and Creatures of Baldur's Gate - Descent into Avernus are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of…
20th Century Fox Intro Scenery made in Blender, it took about a full week to design, animate, texturise and then render, I will add blender file. Thank you for downloading my design. Remember to like the model if you download it! :)…
Christmas Nativity Decoration
Scenic tile! Add some travel destinations for your Gravitrax marbles with the addition of the Eiffel Tower pass through tile. My wife did one setup where she put this tile in the middle of a bunch of wavy slow rails and she called it the…
Elegant, minimal, and celestial—the Lunar Crescent Ring Holder is a stunning way to store your favorite jewelry. Designed in the shape of a crescent moon, this piece adds a mystical touch to any space while keeping rings, earrings, or…
This model is originally carved out of soft and fragrant sandalwood. It shows Ganesha sitting on a lotus throne. He has four arms, right tusk broken with a crescent moon crown. Ganesha is the hindu god of New Beginnings, Success & Wisdom.…
Miscellaneous NPCs and PCs for your TTRPG games
Adolescent Krayt Dragon Skull / Sand Dragon Skull Background on Krayt Dragons : These colossal reptiles, their hides tougher than durasteel, roamed the arid wastelands. Their howls echoed across the dunes, striking fear into the hearts of…
Personal use only. Do not redistribute! It is absolutely not possible to download this model and upload it to different accounts or platforms. I'm Crealitale - Tasty Voxels; other accounts are taking my time for free, and this is not…
Detailed miniature Grinch Christmas village scene . It's the perfect festive print for decorating your tree, gifting, or adding a touch of winter magic to your home.
Hi guys, this is free version of my Nativity Scene Ring Light Art which you can get here or in my exclusive models . In this design I decided to use more and more popular ring/circle LED light/lamp. I ordered mine from here but don't…
[12/12] PISCES - THE FISH Here is complete series of sculpted zodiac signs. All my photos are REAL and show an actual 3D-printed figure photographed by me. [ Suggested Print Setup ] Nozzle: 0.4mm Layer Height: 0.15mm ( You can adjust the…
Rabbit Season sign for the Bugs Bunny and Elmer Fudd Gun scene from the Warner Bros. Looney Tunes/Merrie Melodies series. The Rabbit Season sign completes the full gun scene with my Bugs and Elmer models that I have previously posted. No…
I saw a similar model on my favorite news app (9gag 😜) hanging from a Christmas tree, and I decided to recreate it with a few tweaks. First, print the model in any color you prefer. No supports needed with v1.1. I also gave it an…
Ascending rail compatible with BRIO and IKEA wooden rails. See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code…
Building in H0 scale for (not only) model railway & scenery fans. Inspired by the common belfries you can find across the Central Europe (historical, ruined during communism, then partly renewed). Model is ready to be 3D printed on single…
These simple and compact holders may support Scenario reference, Act and Agenda cards, with a tray for doom and clue tokens. They can also be used with any board game featuring american-sized cards. Print two large holders and one small…
The original author made a nice lantern! The author i remix from did some great work for with his 5mm conversion. Now it is my turn to publish my remix. What did i change? Bigger hole for candle (37.5mm) smaller outer-ring size to save…
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). There are two sizes to choose from (the original, 64 mm…
Beautiful Ramadan crescent decoration with stand.
Dreamy 3D printed moon angel table lamp — a celestial crescent night light for bedroom, nursery or romantic home decor. Fits the tBulb B dimmable USB LED module. id : se1008187a2 size : 138X92X180mm files : 4 pieces : 6 maximum size of…
Descending rail compatible with BRIO and IKEA wooden rails. See it before you print it Preview3D opens 3D models and G-code the way Quick Look opens a PDF -on a Mac, an iPad, an iPhone and Apple Vision Pro. Point your camera at the code…
UPDATE I'm working on printing this and I think it might be a little small. The printer is having some trouble with the statue's details. I'm going to try a slightly larger model and see how it works and I'll update the files here soon.…
I used a vector image with a random pattern. I applied this to the surface of the pyramid, then created deep grooves to play with the light. Once assembled, this lamp measures approximately 220 mm in height. It is quick and easy to print.…
Nativity Scene in multiple Parts, some of them might be difficult to print with an FDM printer but not impossible. The Figures are connected in 6 groups which can be moved independent from each other. Figures: Maria Joseph Jesus Angel…
If you like the model, you can support me by nominating my profile or this model. Thank you! Thank you for downloads, likes… Enjoy !
Both models feature a perfectly placed opening allowing you to see which perfume you currently have in the case. For the ‘’Spray Case'' you simply have to drop in the vial and turn it 90 degrees to use it. It also features a locking…
Continue your Gravitrax marble tour around the world by visiting London and seeing Big Ben! I'm enjoying adding some scenery to our marble layouts and will be doing a bunch more. Enjoy! This is a remix of these models:…
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). Printing tips: Print the rock and cap as oriented in…
A witch standing in front of a crescent moon frame, cloak shaped like flowing stars.
Bring the magic of Christmas to life with this adorable Chibi-style Nativity Scene , designed for easy 3D printing and painting. Each character and element is modeled with cute proportions and smooth details, perfect for creating a warm…
itachi moon scene from naruto shippuden
I wasn't satisfied with any of the cresent wrench holders that were out there and wanted to make one of my own for the multiboard and also have it screw in instead of a snap. I want to always keep my designs free for anyone who wants to…
If you like this this one, check out my other string art models here . This print is pretty difficult to set up properly so please just use the prepared 3mf file that contains custom supports and all necessary settings. Not scalable. Must…
Presenting the leaning tower of Pisa in a Gravitrax tile to continue the scenic tour around Europe. Have your marbles enjoy the views while using gravity to follow your pre-determined paths along the way! Printed with two different…
I have revised the model of “morenostefanuto” to be 3D-printable. Need to mention that I am not a “Andromeda Fan” or “Trekki” but this Andromeda Ascendant model is really huge and looks really fantastic. The dimensions are: length: ca. 50…
Schöne Leuchtmotive für die Decke :)
remixed https://www.thingiverse.com/thing:4905821 to have 4 racks and removable base for flat printing. Have not tried to print, hope it works. Holds 40 pairs of earrings or 80 individual earrings.
It's a basic stable for christmas nativity scene. It's a bit raw but with some good potential. Fits figures about 10cm tall with good headroom.
HSW mount for adjustable crescent wrench. There are other models out there ( like this one ), but they (a) print with the vanes standing vertically which makes them weak, and (b) use a screw, leaving the model free to rotate when mounted.…
Edit: After many comments, I loosened the fit and made it two different files. I wanted to put some baking soda in my fridge to keep it smelling nice but I did not like the open box idea. I saw that arm & hammer sells these little balls…
This adapter attaches directly to the pour-spout of a Scepter water container. The other end connects to an inexpensive water pump (like this one: https://www.amazon.com/dp/B07KW4TPNG?ref=ppx_yo2ov_dt_b_fed_asin_title ). It should work…
This is my take on Loki's Scepter (short MCU version). My significant others dad has a replica that I used to help model this in Fusion. My ultimate goal with this was 3d modeling practice and trying to model this in a way that would give…
his unique piece combines the sacred imagery of the Holy Family with an elegant celestial design, making it a distinctive addition to your holiday decor. The intricate design features: The traditional Nativity scene (Mary, Joseph, Baby…
This is a scent training vessel for dogs learning or competing in scent work / nose work. You can place the scented object inside (such as a cotton swab infused with essential oils). The embedded magnet cutout is designed for a 12x1.6mm…
Simple SFP beer case multiple varient available : SFP : 5x5 10x10 XFP/QSFP: 5x5 10x10 Copper SFP (more tick on top) : 5x5 10x10 QSFP DD (due to heatsink) : 5x5 10x50 more varient could be added as request. This project is freely inspired…
Here's a simple castle model on a Gravitrax pass through tile to add some scenery to your layouts. I haven't printed this yet, but when I do I'll add photos of it here. I'm planning on changing the filament between the white tile and gray…
Some terrain I designed for use with the 40K Boarding Actions game. I do plan to add more but here is what I have right now which should get you gaming. Each wall design is intended to be printed twice, and then glued together to form one…
Continuing with the scenic tour through Paris, here's the Arc de Triomphe! I have 2 options for printing: A complete model all ready to go, just glue in the bottom ring when done printing. Two pieces that you can print in different colors…
Lithophane: Layer height: 0.12mm Enclosure & lid: Layer height: 0.2mm Used a single strip of 6 LED lights glued to the back of the enclosure. Powered it using a 12V DC adapter, have provided a hole in the back for female DC port. I have…
Loki's Chitauri Scepter from The Avengers (2012) This a replica of the short staff Loki used to mind control Hawkeye and several others, and escape from the S.H.I.E.L.D. compound. This item is approximately 96 cm long (36 in). This…
This is a modular case system for the Raspberry Pi 5 and its various HATs. (There is also a prototype Raspberry Pi 4 adapter, in case someone wants to try it…) Comprises a base, a lid and several “spacers”, each one of them with the…
Have yourself a merry little Grinchmas ;) Try to hide this cute little piece of decor within your (or your wife's) ordinary Christmas decorations and watch how long it stays unnoticed. For best results print the model "face down" on a…
We're heading over to Easter Island to see the Moai heads with this scenic tile. I suggest printing a few and having marbles run through them while they visit Easter Island. Single piece, change filament around layer 48 if you want to…
Immerse yourself in the spirit of Christmas with this beautifully crafted, 3D-printed Nativity scene. This custom-made piece offers you the freedom to add your own decorations, paint in your unique style, and even incorporate lighting to…
All the pieces and characters to create your own nativity scene.
rollbar and flatbed for the ascent use the shocktower mounts to secure the bed, rollbar screws in the bed with 3 2.5x10 (reused screws from the ascent) supports screw in the rollbar with 2 2.5x10 (also reused screws)
Set of 6 bricks for modular stone walls for miniatures. Dimensions are 1x1x2 cm. Suggested print using Resin 3D printer. I haven't tried using FDM but should work as well with appropriate base. With resin printer I suggest printing the…
I reworked RostaP's caliper holder for the Honeycomb Storage Wall to hold a 6" crescent wrench. It also holds an 8" but you have to adjust the rotation of it around the center bolt to get it to hang straight. Print Settings: Layer height:…
This is a crescent moon box that I created in Fusion360 as a gift for someone. I used glow in the dark green filament and it came out great!
80mm wide, 60mm high and deep. This size is based on actual products made for this purpose. Stacks nicely. Numbers from 1 to 9 are available, two digits are possible with the same font size. Best printed sideways, no supports necessary.…
It's the Gravitrax Viking house scenic tile! Saw this on Thingiverse and had to make it into a Gravitrax compatible tile. You can either print this in two parts and glue them together, or print as one model and do a filament change around…
2x5x3/4 Grdifinity block to hold the Crescent Brand Miniature Cutters & Needle-Nose Pliers Set https://www.amazon.com/Crescent-Miniature-Needle-Nose-S2KS5-Hobbyist-Electronics/dp/B002Z9Y07I The tools sit below the “lip” so you can stack…
Crescent moon planter for real or fake plants. Versions with and without drain holes. Makes a nice decorative holder for an air plant or small succulent. No supports required. The top of the moon is about max for printing without support.…
Height is <13cm, width at the base ~14cm. If printed in fine resolution (0.1mm) at 100% that might take 2d or more. Print with supports recommended. The opening at the center is cylindric, exactly 100mm in diameter and 125 mm deep. The…
Remix of https://www.thingiverse.com/thing:4266328 Original is a very cute juvenile axolotl, and works perfect for that when printed about 1.5 inches long. I wanted something that looked a little older Removed base, corrected number of…
A detailed diorama inspired by the Stranger Things universe, depicting the terrifying portal to the Upside Down.
Commercial use is NOT allowed for this model