Counting matching models…
NEW: Nevermore Mini - Basic Assembly (5020) It doesn't need any complicated electronics - just connect a fan you already have (5020, 5015 or 4028) and experience filtration just as good as with all the fancy electronics and sensors!…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
Here's my design of a Prusa XL Nozzle Scrubber / Brush. There are tools for correct assembly, brush holder and filament collector. Drawn in Fusion 360 Print instructions ¤ Remenber to use tree support on Brush holder ¤ Use .3mf or .gcode…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
Nature's Miracle Small Animal Cage Scrubbing Wipes 30 pack and Clorox Disinfecting Wipes 35 pack holder - for some reason, these two unrelated products have identical containers, I discovered by chance after printing. Has screw holes to…
Print approx. €6.27–€7.67 excl. taxPreliminary estimate for one variant
Přípravek stačí nasadit zespod na scruberr a přišlápnout k zemi, poté otáčet víkem. Tisk z PETG, perimetr 3x, infil 50%.
Print approx. €3.20–€3.92 excl. taxPreliminary estimate for PETGSource material: PET
It might need to scale at 10%. No support needed.
Print approx. €12.25–€14.97 excl. taxPreliminary estimate for one variant
This is a brass brush nozzle scrubber with a bucket for Voron 2.4. It has 2 parts which connect together with standard 6x3 Voron magnets. Printed without support. Designed to fit 300mm Voron 2.4 but could be used in 250mm or 350mm Voron…
Self draining scrub daddy holder. Printed with 15% infill and supports to baseplate.
Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove…
My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water New version here with print in place jointed legs…
My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water This is a new design with print in place jointed legs, in the original the legs clipped on…
Print-in-place articulated Scrub Daddy sink holder designed for easy, support-free FDM printing. Prints in about 2.5 hours and uses roughly 45 grams of filament . Articulated legs hang over the sink edge, arms support the sponge, and a…
It cleans the nozzle every Time in get parked. Also great for Tool changer, since it then cleans every Time.No need to adapt gcode or Change the settings! 13.11.2023 Added 2x redesigned and optimized (for 0.6mm nozzle) debris buckets…
What started out as a remix has now been completely overhauled in CAD to require a bit less Y-overtravel and be a bit more robust. If you are here to reprint a specific part, or using parts from other remixes, it may not fit together…
Simple self draining tray to hold a round Scrub Daddy or other 100mm dia. x 40mm wide sponge. Feet at the back prevents it from sliding into the sink and a lip at the front drains water back into sink. Position at the back of the sink…
Update 04/14: Revised design to have a flush bottom eliminate the need for supports if you have good bridging capability :) Vertical drying rack for one or two scrub daddy sponges. The grove on the bottom matches my sink but included the…
A remix of a mounting arm I found in the Voron Discord. Unfortunately I don't know who created this. I made this one from scratch and also added the step. You need 2xM3x12, 2x extrusion nuts and 2 heat inserts. You can find some example…
5/10/23 update: I also created a new alternative remixed version using toothbrushes/brass bristle brushes that looks like this, which you may prefer if you don't like the paper towel solution in this design. If you have a spare…
A holder for your Scrub Daddy with ergonomic drain
The Scrub Daddy! It's the Apple phone of sponges - overpriced but seemingly for good reason. I hated leaving my Scrub Daddy sitting looking pitiful on the counter top; so what did I do? I went a made a nice little mount for him! (Or her…
The source marked this model as adult content.
It is recommend to print laying on back and add supports for fingers only. Will need some post processing. Edited to add Big Daddy, longer legs and forward lean for a larger base and better center of balance.
Big thanks to FunFunBoy to his simple and easy Nozzle Scrubber Bucket . I want this bucket to fit my trident and i made this arm extension to mount it on the bed . Printed with ABS 0.2 /50% infil /4 walls / 5 Top -Bottom BOM 2 ( M3 heat…
NOTE: An improved version of this is available for purchase on my Etsy store . While you can download and print your own here, purchasing from my store gives you additional benefits: The M3, M4, M5 and M6 threads are pressed-in aluminum…
Scrub daddy sink caddy! BOM: Suction Cups The suction cup holes measure 14mm (outermost diameter) to 10 mm (inter diameter). See the example suction cup measurement image included. NOTE: Before printing, check to see if your sponge will…
This 3D printed sponge caddy is the perfect accessory for the Scrub Daddy sponge. Designed to keep your Scrub Daddy within easy reach while you’re washing dishes or cleaning counters, this holder is crafted to securely hold the sponge and…
For long time now, we've been using the Scrub Daddy line of sponges in our kitchen. They've typically either been set on the edge of the sink or (on occasion) stuck on the handle of the faucet using the ‘mouth’ of the sponge. I searched…
ScrubDaddy sponge holder with drain tube.
This is the same as the original adjusted to hold a thicker sponge. The original has been in my sink for about 3 months. It seems to be holding up well. I printed this in PETG at 0.2mm layer height, 3 walls, and 10% infill. The Fusion 360…
A family member asked me to print one of those scrub daddy stands that have legs, but none of the models I found fit on my build plate (100x140mm) so I decided to model one myself. I tried to challenge myself and do some curves based…
Liked the big bucket but needed it to fit my 350 model.
Here is my version of a peeing female Scrub Daddy holder. Printed with variable layer height Inland Purple / Gold Silk PLA 4 walls 5% infill
EN: Update Nov. 12th 2023: Following some suggestions, I have uploaded two further variants with 1 and 2mm higher brush slots. The 2mm higher version removes blobs from the nozzle and also the underside of the silicone sock quite well. As…
External Filter / Scrubber for the Qidi Q1 Pro consists of three parts: Mount Base, Hepa Box Activated Carbon Box. The design includes rails that allow for easy removal of both the HEPA and Carbon boxes without the need for any screws.…
An easy to print replacement PEI nozzle cleaning plate holder for the Qidi Plus 4 Introduction The stock PEI holder allows the nozzle to collide heavily with the edge of the PEI plate. Most of the times the printer handles this okay, but…
Updates Update 5/20/2024: Added custom GCODE (optional) for extra wiping in an "A1 style" with this set of nubs. See section below for how-to. Update 5/19/2024: Updated to V2, which is now slimmer and has you put the flinger on in the…
Highland Cow Scrub Daddy Holder. Drains out of mouth. I keep all my models free for personal use, if you wish to support me you can buy me a coffee! https://www.buymeacoffee.com/honeybunny3d If you would like to sell my models please…
Printed on both a Ender 3 v2 and a Formlabs Form 3
This model is a Scrub Daddy holder designed for a kitchen sink. The holder features a compartment to neatly store the sponge and has a funnel on the base. This funnel allows any excess water from the Scrub Daddy to drip directly into the…
An adaptor that attaches Scrub Daddy sponges to a 1/4" hex shank drill.
In the 1970s, there was a popular ceramic pot scrubber holder that took the shape of a frog. This whimsical and functional kitchen accessory was designed to hold a pot scrubber or dishwashing brush while adding a touch of charm to the…
A little organizer I made for storing all of my girlfriends hair ties, clips and pins. It's 200 mm x 120 mm and should fit on most of the common bathroom shelfs. The four bigger compartments on the left side of the model are slightly…
This is my solution for attaching a scrub daddy to a cordless drill. This model features a 9mm diameter hexagonal bit connected to a scrub daddy holder tip. Should work with all scrub daddy sponges. I have the dual sided one. Works great…
A sink caddy that holds your Scrub Daddy sponge for quick access and guiding excess water back into the sink. About 85g (supports, 15% infill, printed oriented as it would sit) Print with supports
The bucket is too small for me so I made it big. Has been tested and fit with voron2.4 300mm. It looks good for the 250mm one too on Fusion but has not been tested in real life. Remix from Nozzle Scrubber with a Little Bucket for Voron…
This is tested and installed on my P1P, and I am happy to inform you all that it works well! Please note, this is not an ‘exhaust’ duct. It is meant to recirculate the chamber air after filtering. I reverse-engineered this from a friend's…
This is a scrunchie holder thats shaped like a cactus. My fiancee asked for a scrunchie holder and loves cacti, so I made this for her. She loves it and its very easy to print. The pot is designed to hold it and provide some counter…
sits flush on the counter and drains into sink
Keep your counter clean with this dish wand & sponge organizer. It will hold both round or rectangle sponges depending on which anti-slide pin you use. Excess water is drained back into the sink and not left on the counter. Easy to print,…
A place to store all your scrunchies or your wifes ;) Happy Christmas XD Printed in multicolour pla for nice effect. Print flat no supports needed.
Designed a holder for a nozzle scrubber. The holder stays in place and fits in the gap between bed-bearingblock and printbed and is adjustabel in height and position. The design is just the basic holder, you can mount whatever scruber you…
sI heard that people would like to have a nozzle scrubber system on the front, that they can use with g-code. While my other nozzle scruber are great for multitool printing, this one is intended to be use before calibration. When heating…
There are several designs for nozzle scrubbers but this is compact and fits on the left side, opposite the Z end stop. My print bed thermal fuse is mounted on the right side of the bed, so I could not use the extension arm by 3DP-MAMSIH.…
The Tingkat is a stackable HEPA filter and acid-free activated carbon (pellet) air scrubber is designed from scratch up for the Creality K1C. It should work for the K1 and K1 Max as well. Less the mounting base, the Tingkat measures 116mm…
Yet another Scrub Daddy holder, This one with glasses.
UPDATE MAY 15TH 2025: I've uploaded a fully print-in-place model, no need to print the pieces separately. This one works excellent, but just note that the scrub daddy eyes/mouth portion will be printed horizontally, rather than vertically…
A sturdy stand / holder for drying and storing your Scrub Daddy or Scrub Mommy sponges, with optional drip tray and optional raisers for the drip tray. The raisers must be glued to to the tray, but this is optional. Printed mine in 0.12mm…
-- Change Log: 2024-06-02- Improved filter locking tabs. It's more practical to remove and install filters. -- This is an easy to use air scrubber designed for the Qidi Q1 Pro and X plus 3. It just uses the stock Qidi chamber fan. (I'm…
I am using Tap on my trident which pushes the hot end forward, thus making a rear nozzle scrubber very difficult to use. Clearances are extremely tight. I added a angle to the front of the brush holder to get the brush as close to the bed…
Scrub daddy sponge holder - No support - Easy print - No glue - Two pieces - Easy assembly
Heatset 2 Voron heatset inserts after printing and attach the same as the original brush attachment. The silicon scrubbers come with adhesive backing, so that is used to adhere the scrubber to the holder. Printed in ABS with standard…
My wife needed something to hold her Scrub daddy sponges. This is designed to fit over my sinks middle divider and hold the daddy/mommy sponge with the spikes for the eyes and another normal sponge on the other side. Designed so that the…
I made these holders for our dish scrubbers at our apartment Note - the refillable soap one will only work with the replacement sponge heads, for some reason those are totally different than the first head that comes with the scrubber.…
Nozzle scrubber for Voron 2.4 I was having issues with oozing with my Revo Hot End and it was throwing off the Z Calibration plugin. So I designed this with parts I had to hand. Works a treat! BOM: Silicone Egg Ring - 2.5mm thick -…
This is my first 3D print that I am comfortable sharing. I wasn't happy with other models without drains and some drains didn't fit my needs. The drain is large enough as to not impede flow and it sits nicely on the side of a sink. I used…
Ella the Elephant Scrub Daddy Holder with drain for your sink. I keep all my models free for personal use, if you wish to support me you can buy me a coffee! buymeacoffee.com/honeybunny3d If you would like to sell my models please check…
Do you keep getting a little something extra on your nozzle ? Nub Scrub will help you rub it off! Nub Scrub is a nozzle wiper that cleans your nozzle by adding the silicone nubs from the A1 style of wiper to the PTFE tube from the…
BOM High temp silicone brush for cooking 2 pcs M3*8 mm 2 pcs M3 t-nut [gcode_macro CLEAN_NOZZLE] variable_start_x: 265 variable_start_y: 300 variable_start_z: 1 variable_wipe_dist: -35 variable_wipe_qty: 5 variable_wipe_spd: 150 gcode: {%…
German / Deutsch: Praktischer Scrub Daddy/Mommy Halter für Küche oder Bad. Runde Platte mit ausstehenden Augen und Mund bietet eine charmante Aufbewahrungsmöglichkeit. Hergestellt aus umweltfreundlichem BioTech PLA Weiß, mit 10% Infill in…
In Action: The “Brush Cleaner with adj mount v6.stl” is tested and seems to work well. A thicker and maybe more durable variant “Brush Cleaner with mount v6 thick.stl” is also available but being tested… Feedback is welcome. For a look at…
A sponge (scrub daddy) holder. It's got a flat (give or take) bottom for sitting on flat counter tops. It's ramped internally so that any moisture in the sponge will run off into the sink. Plenty of ventilation to help it dry. While I…
Keep your scrunchies and hair ties neatly organised with this convenient wall-mounted holder. Designed to be attached to a wall or cabinet using command strips, this holder eliminates the need for drilling and ensures easy installation.…
A handle for the scrub daddy. Designed to be printed without any supports.
Print without supports, brim and raft are optional. (P.S. It looks hilarious.)
13 January 2024: Included an upgraded Filter Module (FilterModuleHighVolume.stl) that holds about 30% more pellets than the old one with no changes to the outer profile. Also included a STEP file of the whole thing for adjustments or…
A holder for your Scrub Daddy that will drain into the sink. Gap from the edge of my sink to the wall is 5 13/16 inches or roughly 147mm so it should work for anything that size or smaller
Standard Voron specs Need to use M5 hammer head t nuts for install due to the new extrusion tab added.
Scruff guard for rats and mice to protect user and the rats or mice. -Printed in petg with 100% infill -Note this project is still a work in progress and a V3 will be out soon alongside the V1
Printing Instructions for Best Structural Results PLA, PETG, or ABS 0.4mm nozzle 4 perimeters/walls required No infill required No brim required (unless adhesion issues are prone for your machine) Designed with Plasticity and Autodesk…
Update Nov. 3rd 2024: Based on Genes comments, I have made a 1mm and a 2mm raised version. There is also a new improved debris bucket remix (Prusa XL Bucket for 11.6mm wide nozzle brush.stl with 12mm cutout). The excellent nozzle brush…
This 3D-printable scalp scrubber/hair brush offers a comfortable and practical solution for scalp massages or gentle hair washing. The design includes: Handle Base : Choose between two ergonomic styles—plain or with a grip-enhancing knob.…
I thought I'd gain some more experience in 3D modeling and try and recreate a common object. I recreated the Scrub Daddy sponge and miniaturized it and made a keychain out of it. This is made in 2 parts which secure together using 1.75 mm…
Careful! It is a pretty tight fit. Double Check that nothing collides. Check your screws and inserts. Exhaust fan Adapter for the Scrubby mod 92mm to 120mm. Now you can use every 24V 120mm fan pwm :-) I used this fan (way to overkill)…
Recommend printing with 3+ wall layers to help keep the socket from reaming out.
I had some spare Bambu Lab A1 heatbed nozzle scrubbers that I had purchased to put on my Voron and Prusa XL printers. I decided to design a simple handle so that I could have a gentler alternative to a brass brush. This uses the A1…
I did this mod specifically for the Micron/Micron+ printers, but it probably can fit any 1515 extrusion printer. Multiple bucket sizes are included. Print using standard Voron settings. M3x6mm screws for mounting. Follow the directions…
Trident right angle bracket + mount for use with Bambu rubber scrubber strips and nozzle wiper. You can get them from Bambu's site and are easily replaceable if they get broken. I included spacers at 0.25, 0.5, and 1mm so that you can…
This is a nozzle scrubber with a bucket / bin for Voron 2.4. I use it on a 350 and it lines up with the edge of the bed. This remix addresses two issues: The original wasn't wide enough and I would find bits would fall out the side The…
I'm listing this as a remix, although I've re-modelled it from scratch (with changes) so I could include the STEP files. Brush Size: ~46mm wide, ~11mm deep, cut 10mm from the bristles - I used the larger of the brushes from this set . The…
to use Bambu wiper and scrub brush
Sink holder for Scrub Daddy Sponge. Can be secured by suction cups or 3M VHB double-sided tape.
Take your Makedo cardboard construction to the next level! Insert the Scru-Bit into your cordless electric screwdriver for fast, easy Makedo disassembly. Disassembly: When it comes time to take down a large Makedo cardboard creation, such…
This Mini-Tool combines features from our Scrudriver and Safe-Saw into one super useful little tool. Slip it on your finger and go pro with your Makedo making skills. Punch holes and screw into cardboard in a single fluid motion.
Would print this as I did, with 100% infill on the base layers to give it some heft. You can add a height range modifier to the slice at 12.7mm to encompass the entire base and add an infill modifier at 100% to achieve that.
Wall or cabinet mounted organizer for women's scrunchies. Needs 3M double sided wall mount stickers to attach to any surface.
This is a remix of another remix. I found with the original model that it does not fit around LDO's version of the Trident endstop switch due to it being physically larger. Also, LDO's bed mount is a few mm taller than a “base” Trident so…
What is it? Well, it's a drying tray for those awesome Scrub Daddy or Scrub Mommy sponges! Why? We use these sponges in our kitchen but didn't really have anywhere to store and dry it. So, like a lot of us 3d printer types, I decided why…
The friend that requested the hair stick holder ( https://www.thingiverse.com/thing:2364443 ) also asked for one of these. The one I did find on here was a bit more complicated than I needed, so now I present you with this version. It's…
