Counting matching models…
The SD2SP2 POR (Pro?) has a problem - there is a gap between the SD card slot and the GameCube chassis. It's very easy to insert the SD card into the void and you'll have to unscrew the GameBoy Player just to retrieve the card. Print this…
This is a complete redesign of the SD2SP2 cover, which widens the opening to access the Micro-SD card and better supports the SD2SP2 adapter. All dimensions were pulled from the original SP2 cover and optimized for FFF printing. I took…
alternative case for the sd2psx-project. - printable on fdm-printers - 4x M2*4 sockethead-screws project-link: https://github.com/sd2psx thanks to bbsan for inspiration and testing
Use the screws of the display to fix the case to the module. The holes for the screws have to be drilled by you, but they are marked and can be found easily. Holes left by the printer would result in a messy print (at least for FDM).…
This thing covers the gap between the SD2SP2 and the console. It avoids accidentally inserting the MicroSD through the hole and it improves the aesthetic appearance of the whole. This is a specific design for my SD2SP2 (Rugal_kof94's…
Uses two parts with clips that slide into each other. One part goes on the dock and utilizes the two M4 mounting holes. The other part is screwed into the desk and uses any small wood/sheet screw (I use 2.5x10 screws). Printing Both parts…
This is a side plate for the breadbin case C64 for installation of an internal SD2IEC device. The main purpose was to install additional buttons for disc image change and an on/off switch. The used switches can be clicked into the side…
Remixed the original top case as I couldn't get the screen centered and flat to the print while blind soldering. Tested this on 3 prints and they all centered nicely and keeps the screen flat. If you use a different OLED screen than the…
Update 13/07/26: Added wmp5_Barrel_PropTop.stl to the parts list. I got a request for an alternate barrel top without the wiimote holding section. ... An absolute classic! I'm tempted to do the little stubby MP5K too The suppressor…
Experimental - Will probably never be updated https://www.reddit.com/r/Gamecube/comments/122ikdn/picoboot_sd_card_mod_install_dol101/ I don't know if the parts will be compatible with other motherboard models than mine The back cover…
Magnetic rear body mount / holder for the Yokomo SD_RD_2.0. There are a few different variants for different bodies. Adjusted angle. M3 screws mounted.
Skadis NeuMaster NSD2013 Drill Holder with OpenSCAD script
I have created a full set of LED strip holders for the Yokomo SD 2.0 1:10 scale RC drift car. Tested on a real model. More information about the electronics, wiring, software and integration with the Futaba transmitter is available on…
I needed a case for the SD2IEC Card reader kit offered by Fascination C64. You need the bottom and top half, 3 of the back knobs and one side knob. The case can be mounted together with M3 screws. They fit into the mounting points of the…
Držák na kamery Dahua
This is a mounting bracket for SD to IDE adapter that allows you to mount the device in the card slots Mounts with 4 x M3 screws, there's a place for M3 nuts in the back but it can also be self tapped to the plastic There are other…
A case for the Board Folk SD2IEC / EPYX FASTLOAD device for the Commodore 64. Clip the topper into the top case first before putting in the SD2IEC / EPYX FASTLOAD device into the top shell and then clip the bottom shell on. You can use a…
Case für das MSD2IEC SD-Kartenmodul für den Commodore C64.
To have an ATX power supply in a 10-inch rack in 2 easy-to-print parts: 2.5" SSD, 2 LEDs, and a PC on/off switch
To have an ATX power supply in a 10-inch rack in 2 easy-to-print parts: 2.5" SSD, 2 LEDs, and a PC on/off switch
This is a mounting bracket for SD to IDE adapter that allows you to mount the device in the card slots Mounts with 4 x M3 screws, there's a place for M3 nuts in the back but it can also be self tapped to the plastic There are other…
Uses two parts with clips that slide into each other. One part goes on the dock and utilizes the two M4 mounting holes. The other part is screwed into the desk and uses any small wood/sheet screw (I use 2.5x10 screws). Printing Both parts…
BOSCH GSD26410 freezer top door hinge BOSCH GSD26410 mraznička záves na horné dvierka Pôvodný “biely” sa zlomil The original "white" broke
Dirt Devil SD20020 Attachment_v2. I modified it to remove the small thingamajiggers on the tip that are sticking out after I printed what is in the pics. To get the final size, I loaded it in the slicer and only printed a few layers to…
I'm new to 3D printing, but I think I have a good mind for it. Most of my designs will be built for function. New Version 3 added with a crossbar for added screw support and proper distancing to not block front ports.
This 3D-printable Vacuum Adapter for the Scorpion Quick Flip Corded Handheld is an efficient solution for using your handheld vacuum. Its compact design allows you to attach a different attachment so that you can add your favorite…
I used PLA because it warps the least. Works great! For me it's a perfect tight fit.
alternate version of Sideloading SD2SP2 Cover for Sideloading SD2SP2 with a slightly different shape I made it from scratch but wanted to give AmyGrrl credit for coming up with the idea, tried to make it printable without supports and it…
SD2VITA card adapters are prone to being defective. In my case it was because the cartridge wouldn't go deep enough into the Vita. I redesigned the plastic shell to fit the components better and actually work. Assembly should be done as…
I got tired of having to remove my Game Boy Player to get access to the SD card on my SD2SP2 port, so I made this SD card mount. The SD card reader used here is: https://www.adafruit.com/product/254 The board width happens to be just…
This is a case for the SD2IECplug project , which is my layout for the SD2IEC floppy drive replacement for 8 bit Commodore computers. The SD2IECplug v2 was never specifically designed to fit into an enclosure, so this case makes a few…
