Counting matching models…
These are the housing files for the (tr)uSDX Radio. Print in PETG / 0,15mm Layer Height / 20-25% Infill Tap (cut M3 Threads) into upper/lower Wall before putting inScrews. UPDATE - 11 July 2022: Added new Bottom Cover for Slide On Battery…
BACKGROUND: The QMX , (tr)uSDX and Elecraft KX2 and KX3 are fantastic portable radios, but the microphone for the KX2/KX3 is relatively big and heavy, and there really is no good mic option for the (tr)uSDX. So, I decided to design one.…
Lower rotary know for (tr)uSDX. Requires to saw off rotary shaft. 2mm of D-shaped shaft should remain. See this youtube Video, how I did it:
With “High Band” and “Classic Band” RF boards individually available now, I wanted to make a new case that allows for easy swap of the RF board without having to disassemble the complete case. More about the design and construction:…
This is the housing for DL2MAN uSDX Sandwich , so users that already have an existing Sandwich can print an easy housing. It requires to remove the electrolytic capacitor below OLED, replace it with a small tantalum capacitor and solder…
Look at https://dl2man.de/linked-dipole/ for detailed instructions and look at the Video for seeing me setting it up, doing all the measurements and some QSOs. All files Printed from PETG in 0,15mm Layer hight, no supports needed. Make a…
Let's face it, the standard volume and tuning knobs for the QMX, QCX, and (tr)uSDX aren't great. I set out to make them a lot better. Here's my solution. Print these top-side down, then use some M3 set screws like these…
This is a remix of the 18650 battery holder for the (tr)uSDX. It allows for a 3S BMS off Amazon (~$2). This allows for safe cut off when low voltage is hit, and also for safe charging and balancing off a ~12v power supply. I tried to…
My printer is apparently far enough out of tuning for the stock knob for the trusdx housing to fit, so I designed and printed my own. Included the design files as well if you need to tweak anything.…
2 versions. has a part that protects SMA the other does not
(tr)uSDX wire winder case upper and lower panels
This is a small brace to support the SMA to BNC adapter from Signalstuff. Adapter can be found here: https://signalstuff.com/product/smam-to-bnc-adapter/ This is designed for the (tr)uSDX by DL2MAN and PE1NNZ. It simply slips over the SMA…
Please like and follow and post your makes After building the (tr)uSDX by DL2MAN and PE1NNZ and the associated battery box (link below) for three 18650 batteries. I found myself looking for things to prop up the radio on. So I have…
Low-profile knobs suitable for the decoder on the truSDX. Requires shortening the shaft by 5-10 mm! Heights/versions: 10 mm 15 mm (easier to use) Derivate of the original design from @DL2MAN…
You can print two pieces for get a good stability. This stands is usefull for put your uSDR/uSDX (only for the model showed in the pictures here) at 20 degrees of elevation and avoid scratches in the box. It can be printed with any…
This is a simple remix of the front facing plate from the official (tr)uSDX QRP Transceiver housing. It provides a drop-in replacement for radio operators who would prefer a stealth version with no text or labels. Print in PETG, 20%…
Please like and follow and post your makes This is a knob spinning lever I made up in tinkercad. It has a recess for your finger and the knob hole is tapered and specific to the original (tr)uSDX knob from DL2MAN / PE1NNZ. It fits on the…
Print at 0.2 layer height. it should just screw on without much effort be careful not to force it.
V2 of the simple Expansion Case suggested by DC8LZ to have enough space for 18650 cells, BNC Jack for the antenna, switches and more… Use it in conjunction with DL2MANs Case /prints/103619-housing-for-trusdx-qrp-transceiver to connect it…
This model try to provide connector for (tr)uSDX hw. It contains customized holes in which traditional cheap jack 3.5 mm male can be placed. The connector is from ali express. The same header is used for 4/3/2 pin jack. The jack should be…
I made a ppt microphone for my portable (tr)uSDX ham radio station. It has a compliant mechanism for the ppt button. The microphone is printed in two halves. Print the back and front side of the microphone facing flat side down. The cable…
Inspired by stands I've seen for other tabletop electronics, here's a stand tailored specifically for the official (tr)uSDX QRP Transceiver housing ! You will need to print two of these, one for each side of the radio! This has only been…
This Wedge Stand for the (tr)uSDX , inspired by @w5aug, is a complete redesign to include Storage space for power and/or usb cables, connectors, Mini Mic, etc.. The Back Cover is a press-fit; It may be tight at first. The Stand can be…
I cut these panels out of translucent acrylic.
Remix of the low-profile knob by @DL2MAN_160897 … All I did was add a finger dimple for us folks that like to tune with one finger. You'll have to cut-down your Encoder Shaft… There's a video posted by Manuel in the original model showing…
I didn't like my ugly splice job showing, or the fact that the two 22ga wires are are at a stress point. This Shroud or Cover slides in behind the Battery Holder and makes for an elegant solution to the battery leads. Can be glued to the…
Factory default button is way to small. This is a larger model for better control.
This is a simple expansion case for a battery pack, BNC Jack, Switches etc. for use in conjunction with the awesome (tr)uSDX Transceiver case by DL2MAN. It is fitted with modeled M3 Threads. to connect it just use longer M3 Screws (I test…
Designed with OpenSCAD and source included to make it easy to modify.
Box to transport the (tr)uSDX. Has some wiggle room at the top and bottom to put a foam pad etc in for cushioning. use M3*30mm for the hinges and latches.
BOM: 24x M3 Brass Knurled Heatset Inserts 20x M3 8mm SHBC 6x M3 18mm SHBC Optional Double-sided tape between frame and uSDX and AT100
I modified the battery-slider from DL2MAN with an integrated space for a smal USB-C charging board for 3S batteries.
This is a hard drive or SSD carriage for the Datto S3X1 (SSDX) mini pc. 0.4mm nozzle 0.2mm layer height 50% infill 4 perimeters 5 layers top and bottom The chassis requires two M2 screws to secure the carriage. You'll also need 4 hard…
Inspired by the modular paddle on the Elecraft KX3, I designed this to directly attached to the (tr)usdx. Combine this with the battery pack from Manuel and you get a very compact CW package. I printed this using PLA. To assemble the…
Snap-on stand / main dial protector for QRP Ham radio uSDX (uSDR) Black Brick. No supports needed. Recommended material PETG for its flexibility and smooth surface. Included is GCODE for Ender 3v2 in PETG.
After printing a few of the knobs out there for the (tr)uSDX… Some I couldn't print, some came out wonky, and most… My finger didn't fit in the spinner hole :-( I made this one with an offset finger hole, more leverage, and I could make…
I didn’t see any point in reinventing the wheel, so I picked the best Ryobi adapter here and extended it. This uses the same Keystone clips and everything. You are free to put whatever 18 to 12v converter you can fit in there. Right now,…
This is a remix of Adam Kimmerly's (K6ARK) QMX/QCX/QDX/(tr)uSDX knob. The original K6ARK knob is an excellent design, it is low profile, light weight and makes the tuning knob very easy to spin giving the QMX more of a full size desktop…
Audio case pcd for Retevis HK008 mic
I designed this for my Hirobo SDX RC Helicopter. The tail boom is 21mm in diameter and the main blades are 9mm thick by 55mm wide. I printed it using Filamentum 98A FlexFill. I designed this using parametric modeling in Fusion 360, so if…
These are alternative faceplates for the Leviton SDX style fiber enclosures. Blank. SC/LC Simplex/Duplex. SC/LC Duplex/Quad Clearfield Clearview xPAK
I use this radio as a code practice oscillator when I don't have it in the field, and it's nice to have a stand to make it easier to view the display and work with the menu. The latest version grips the radio well, and can be used for two…
This is a remix of the battery slider from DL2MAN. This version has a reverse dovetail to join the original to create 3S2P battery pack, which can be used to power multiple devices through a distribution point. Designed with PETG for…
Modular Case for the (tr)uSDX that allows easy swapping between different RF boards like the original design but the edges have been trimmed down so that it fits into a beer can. Also the rotary encoder stem and knob need to be modified…
I wanted to mount my radio on the top off my iPad while sitting on a low chair and activating parks on the air etc. so I just added a couple of legs to the stand to allow it to sit on top of an iPad or other tablet.
Overview The CFSDX is a next‑generation spool drying and feed module designed for the K2PW Workstation Ecosystem. It provides a stable, controlled environment for nylon, carbon fiber, and other moisture‑sensitive filaments, integrating…
Simple pouch organizer for the (tr)usdx, nanoVNA and a speaker. Comes in a semi modular design. The nanovna and (tr)usdx are fixed to the base but the speaker holder's would need to be glued in(i used a 3d print pen to weld it in). The…
here's my case design for the WB2CBA uSDX SOTA RADIO, I Added mounts for a speaker in the front panel, fans in the main case for cooling on those long summer days out playing radios and chasing the DX, volume knob hole for a 3w amplifier…
Can fit like three USB items and MicroSD card and/or smaller MicroSDXC card. There's tons of really tight models, but I specifically wanted model that fits like that absurdly big TP-Link Wifi dongle and yet it can still hold those memory…
Oversized rotary knob for the trusdx or (tr)uSDX radio, use test knob to determine your printers exact dimensions. My anycubic kobra s1 needed 106% to snugly fit the dial shaft without too much force with PETG filament, then with those…
I only had M4 set screw so I changed the hole to fit one.
here's my case design for the WB2CBA uSDX SOTA RADIO, I Added mounts for a speaker in the front panel, fans in the main case for cooling on those long summer days out playing radios and chasing the DX, volume knob hole for a 3w amplifier…
After printing a few of the knobs out there for the (tr)uSDX… Some I couldn't print, some came out wonky, and most… My finger didn't fit in the spinner hole :-( I made this one with an offset finger hole, more leverage, and I could make…
I made a little briefcase with a Gridfinity base and, along with a Raspberry Pi and display, I made several ‘containers’ for various bits of RF gear. It's kind of like Lego meets QRP. Anyway, this uses the ‘stock’ case from DL2MAN to hold…
Since I have all 3 versions of (tr)uSDX I took the liberty of creating a new front panel with a little extra text that makes it easier to know who is what. HigBand = HB / ClassicBand = CB / LowBand = LB. Attached pictures are just a quick…
After getting hooked on 3D printing and getting a better overview of FreeCad, I thought it would be good to make a "complete" unit for my (tr)uSDX's so that they are a little more connected.First I made a box for the Nano tuners and then…
Another kit to keep the (tr)uSDX / ATU (ATU-10-0A) / batteries in one unit Please note that the plastic may shrink a little and that the sliding slots may become a little tight on the ATU box, I solved this by lightly sanding with…
My last ATU box is for the ATU-10 as well, but since it is so short, I had to make a new battery box that sits on top behind the radio holder. The battery box is a bit narrow so that batteries do not fall out. Please note that the plastic…
The tolerances for the SMA connector may be wrong, as I haven't received my board yet, but I made the notch wide.
uSDX LP Filter box with latching lid to hold extra LP filters. Category: Electronics
I made a little briefcase with a Gridfinity base and, along with a Raspberry Pi and display, I made several ‘containers’ for various bits of RF gear. It's kind of like Lego meets QRP. Anyway, this uses the ‘stock’ case from DL2MAN to hold…
