Counting matching models…
I share how I made the frame and the magnets in this video: I cut the candy cane models into white and red sections so that I could print the white and red pieces separately and then glued them together with super glue. This is tricky so…
Hi Everyone! We are LEAF1 - an F1 in schools team who were crowned 2024 UK Champions, and competed at the world finals in Saudi Arabia, where we placed 5th. This account is run by the lead engineer - Zac. It's part of our open-source…
Updated 05/18/2022 Added new 79x1 (in three fits) to support season 2 minatures Added new labels for Season 2 Updated Instructions for Season 2 Updated 03/28/2022 Added new medium fit files (see “Optimizing Fit” section below) Updated…
A simple seashell inspired plant pot - it is a part of the seashell collection available in our club. https://www.printables.com/model/748447-seashell-collection-plant-pot-vase-and-bowl-vase-m Print information: Recommended vase mode or…
The seashell model was made out of a 3D Scan. Printing: The seashell model was printed upright with support to have a higher resolution on the surface.
UPDATE: For your convenience I have now added pre-coloured .3mf files at a whopping 520% scale, you'll need to add supports yourself and you can down-scale in slicer if you wish. 😁 ( I have not included the Base ). This was done for the…
Circuit de Spa Francorchamps, Stavelot, Belgium, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
A simple Seasoning Condiment organizer Inside space : 135mm witdh x 50mm length (x 70mm height) (5.31" x 1.97" x 2.75") No supports needed ! For exemple each caddy can hold 4 to 6 bags: Knorr 28 to 36 gr 129mm(5.08") width Maggi 26 to 40…
A set of three seaside bookmarks A rocky shore, a moonlit pier, and a lighthouse under starry skies Two manual swaps — no AMS or MMU required. Print Settings: Layer height: 0.08 mm with a base layer of 0.16mm Color Changes: Start with…
Andor / Mandalorian s3 version of the DC15S carbine as seen in the flashbacks with clone troopers. I did my best to make it as accurate as possible given the limited reference material available at the time of uploading. This blaster…
Circuit de Monaco, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color fillament.…
Lions Paw Scallop Seashell 3d Scan. Scanned with Revopoint Pop3 scanner with minimal modification. I originally bought the shell because it made a beautiful and stable loose change dish, so the scan is functional as well. I printed at…
This is a holder for napkins (or anything, really) in a form of a scallop seashell created from a 3D scan made by iuferky . Can also be used as a stylish marine-themed decoration piece. In its default size, this is best suited for…
This is a homage to my favorit scenes from Rick and Morty Season 1 Episode 1. More to come... https://cults3d.com/en/users/OneIdMONstr/creations Print in 50% for Elegoo Mars. Category: Sculptures
A minimalist yet cute reindeer ornament, which is inspired by the class Band Saw Reindeer by Nick Engler. Because I didn't have a band saw, I designed a 3D printable version similar to the original, but with some slight adjustments for…
Vertical card storage for character and villain cards for Season 1 and Season 2. Note: If you want a solution for storing your minatures see my other model: Marvel United Miniature Storage Card sleeves These trays have a 67.5mm wide card…
This is the new chapter 5 season two medallions
A perfect and easy pumpkin to start the Halloween season! !! NOT for use with open flame, fire, or candles !! Only use with battery operated lights
WORK IN PROGRESS - MORE DETAILS TO COME IN THE FOLLOWING DAYS Hi! We are LEAF1, an F1 in schools team from Canterbury, England, with a focus on remaining both Sustainable, and Open Source as we compete within the competition. F1 in…
Resolution: 0.16 Infill: 15% Nozzle: 0.4 mm Remix from lackaffchen - thing:3089967
Shell Polymer Clay Cutter, Under 3cm in height.
I designed this arrow head loosely after the arrow head seen in the intro of Arrow season 5. It fits a standard 7mm shaft and can be printed upright. Print instructions Category: Costume Print Settings Printer Brand: Creality Printer:…
Wall art decoration with motif of trout. Nozzle 0.4 Layer 0.2 Warning - fragile
Wife had all these packets in the pantry in a ripped open box from tea packets, I was bored and the printers were idle. So this happened. Each divider inside can hold 2-3 of these packets. I printed it on a lower quality setting bc it…
######################## UPDATE 2025-02-03 If you have all 4 seasons, the unknowable box, and all the elder gods, check out my new insert. https://www.printables.com/model/1177300-cthulhu-death-may-die-retail-boxes-inserts-sleeved…
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Max Verstappen from Red Bull Racing . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a…
I finally got tired of my seasoning packets going all over the place in my cupboard so I decided to print a holder for them. All of the existing designs I could find online were either total overkill to hold some packets or used way too…
Now where's that wascally wabbit!? Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Season 3 Chapter 5 Medallions. Created from SVG. I've only printed at max speed to test the designs but some improvements can be made for a better top layer quality.
A 3.5 inch resize of this model https://www.thingiverse.com/thing:417402. The model in the picture is printed in Prusa PCBlend Natural. Requires support from build plate and a raft, as per the OG model. Maybe a draft shield too if from a…
Seashell holder, perfect for use with soap or sponge. Mounted to the wall with no trace double sided tape. There are two versions, with rounded and with straight edges. It may be helpful to add Brim when slicing to make sure it sticks…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Inserto oficial para el juego de mesa Growing Season (creado por Eric Rodriguez https://twitter.com/EricRod_LYV ) Inserto diseñado para albergar todos los componentes de Growing Season ordenados y seguros. Con espacio suficiente para…
Andor / Mandalorian s3 version of the DC15S carbine as seen in the flashbacks with clone troopers. I did my best to make it as accurate as possible given the limited reference material available at the time of uploading. This blaster…
This insert will combine all 4 seasons, the unknowable box, Black Goat, Yog, Ithaqua, and animal allies all into 4 boxes. Without getting rid of the episode boxes, this is what I came up with. This insert will get rid of all your elder…
Autodromo Nazionale di Monza Circuit, Monza, Italy, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…
This diorama recreates the iconic scene from Stranger Things (Season 4) where Eddie Munson performs an epic guitar solo on top of the trailer in the Upside Down . Standing on the roof of the RV, Eddie plays his electric guitar to distract…
This is remix of TShelley's amazing Marvel United Insert system. This covers how I fit Season 3 into the Kickstarter extras box. One issue is that Crimson Dynamo's base is 35mm instead of 30mm like most of the other minis. I modified the…
A star Fidget that might break, so be gentle. Might take 1-6 hours
A pumpkin featuring a lattice design.
I haven't done any print tests. I'll have to make tolerances for assembly. You can use it after modifying it, or I'll modify it and upload it as soon as possible.
I remixed the original design to hold Mojo (XLarge), Onslaught (Large), and Brood Queen (Large) in the Infinity Gauntlet box. It seems there is a lot of variance in the bases for Marvel united (I used the “Loose” trays and still up-sized…
The second printing of Final Girl came with updated storage trays. As they still do not offer secure storage for the components, I updated my original design to include enough space for sleeved cards (Sleeve Kings) and slots for the…
Silverstone Circuit, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
🌊 Seashell Fairy House – Undersea Magic for Your Shelf! 🐚 Bring a splash of ocean whimsy to your 3D prints with this enchanting Seashell Fairy House ! Shaped like a spiraled shell and crowned with a charming starfish roof, this cozy…
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Charles Leclerc from Ferrari . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a collectible…
statue of Poseidon, god of the seas If you like it, give it a follow, like and download it, it helps me a lot. Thanks for the support!
Present your Benchy in Style with this stormy benchy stand. It comes in 3 parts. If you're looking to do this in multiple colors you can simply split the body and the "rain" will be a separate body from the stand itself allowing you to…
1.- Motivation As with all prints I do, all start or from a need or a lust-to-have. As an additional hobby that I have is to grow hot peppers, and at the beginning of each season, I grow new seedlings from new varieties, therefore there…
Red Bull Ring Circuit, Spielberg, Austria, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
This Insert is an extension of tshelley’s excellent Marvel United Miniatures Box Insert and Penglord’s remix of that insert. I printed tshelley’s design almost as is (I printed the same token tray twice instead of one of each). I printed…
Sea Snail, Seashell - wall art, easy to print
Stranger Things Vecna from Season 5 To make him stand better,heat his legs with a heatgun and push him into a good position
A quick idea I had while messing with a Blender geometry nodes tutorial. A very difficult and impractical print, kudos to anyone who and tries to print this!!!
Suzuka International Racing Course, Japan, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Lewis Hamilton from Ferrari . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a collectible item…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Halloween 3 Season of The Witch Skull Mask With Silver Shamrock Tag
I managed to make a 3d model of the biggest cruise ship in the world, which is the Icon of the Seas.
Circuit of the Americas, Austin, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I still need large mini storage (waiting for Witching Hour). Includes: Trays for Marvel United Season 3 - Multiverse Larger name plate for Crimson Dynamo Updated pet cages (4 standard pet cages and 1 Redwing cage as pictured) I used the…
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Lando Norris from McLaren . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a collectible item…
Inspired by the gentle curves of a seashell, this 3D printed bowl brings a sense of calm and elegance to any space. Its flowing, asymmetrical form captures the essence of oceanic beauty, making it a perfect decorative piece or functional…
Multi-color 3MF files for the Medieval Castle, painted in PrusaSlicer. The Winter Castle is covered in snow, and the Summer Castle has grassy slopes. The five colors are Castle Walls (stone) Castle Roofs (red) Trees (wood) Rocks (black)…
Circuit de Barcelona Catalunya, Spain, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Bring a touch of nature to your home or office with this beautifully crafted 3D-printed spiral seashell sculpture. Inspired by the organic elegance of ocean life, this detailed piece captures the natural ridges of a seashell, making it an…
Circuit Zandvoort, the Netherlands, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
So having looked over cap that it appears that the creed mandos have scavenged whatever they could find... I saw mudtrooper shoulder bells and biceps, shoretrooper bells and some post imperial bells Shoretrooper Shoulder bells and…
Interlagos (Autodromo Jose Carlos Pace), Sao Paulo, Brazil, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate…
Autodromo Enzo e Dino Ferrari Circuit, Imola, Italy, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…
The Seashell Coffee Filter Holder #4 is a shell-shaped holder designed to store #4 coffee filters. Perfect for your coffee station! Instructions: Print the model in your choice of filament. Lay the model flat on the build plate. No…
Das Modell ist von Thingiverse, leider nicht bei Printables zu finden. Es passt aber perfekt an den Retroid Pocket 3+. Gedruckt habe ich meinen Griff in PLA mit einer Skalierung von 99,5% und nichts wackelt. Zur Stabilisierung habe ich es…
Introducing my Seasonal Lantern with Interchangeable Panels. I first started this project as a lantern for Halloween 2022, and quickly realized it could be so much more, I will be updating this model regularly with new features and…
I designed and drew up in Fusion360 a prop for Cosplay. Its the "goop" that is found by Erica Robyn and Steve. I used a "Voss" plastic water bottle as the clear bottle. It is 63mm so the top and bottom are designed to fit that. The base…
Jeddah Street Circuit, Jeddah, Saudi Arabia, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Designed to hold a bath towel. 81mm (3.14") tall. MOUNTING HARDWARE: I used #8x1-¼" screws and plastic drywall anchors that came in this kit: https://www.amazon.com/Plastic-Self-Drilling-Threaded-Self-Tapping-Mounting/dp/B086ZK7RBF/…
Bring a touch of the ocean to your vanity with this beautifully detailed Seashell Makeup Brush Holder STL . Etsy Premium STL MODELS : https://mayy3d.etsy.com Looking for a commercial license? Visit my Patreon for reseller options and…
The starfish has a central hexagonal body with five tapering arms. Each arm is divided into three hinged segments, allowing it to wiggle and move flexibly rather than being a rigid statue.
I fixed the original model by removing the wood grain from the bottom, and fixing the text so its not floating.
Keeps track of which season a player is in. Can be especially useful when playing against Nightweave in Mistwood expansion (replaces the cardboard discs).
Bahrain International Circuit, Bahrain, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Mickey's silhouette dressed for Christmas decoration. Easy and quick to print in one piece. Perfect for the little ones' preferences. Printing settings: Nozzle diameter: 0.4 mm Layer height: 0.25 mm Perimeters: 3 Top and bottom solid…
The files leverage shipping tubes in order to create the main body of the thunders pears this allows for a very light weight but structurally sturdy prop. I have a video tutorial that explains how to assemble the thunder spears. The video…
Get the 4-pack bundle on Etsy: https://cookystl.etsy.com/listing/4461232878/4-ocean-cookie-cutter-stl-bundle Commercial license available here: https://www.patreon.com/CookyStl DIGITAL DOWNLOAD – NO PHYSICAL ITEM WILL BE SHIPPED Bring the…
Hungaroring, Hungary, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
The figure is designed as a "flexi" toy, featuring articulated joints at the shoulders and waist, allowing the limbs and torso to wiggle or move freely. Color Palette: It is printed using multiple colors: Cream: For Patrick's main body.…
Show your support for your favorite Formula 1 driver with this custom keychain design featuring Andrea Kimi Antonelli from Mercedes . Perfect for F1 enthusiasts, this keychain adds a personal touch to your keys, bag, or even as a…
Marina Bay Circuit, Singapore, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
These plugs are designed to go inside a seasucker HUSKE mount and let you put your thru-axle bike on it. Highly recommend printing this as 100% infill as you want the part to be SOLID. Also recommend a brim and upside down. I designed it…
A Diseased Giant Rat. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
This is a simple seasonal tealight candle holder that I designed as part of a "CAD for 3D Printing" workshop for the NetApp YWIT 2020 event. You can see the video of the design session here: https://ywit.io/workshops/cad_for_3d_printing…
Autodromo Hermanos Rodriguez, Mexico, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Bonsai pot with dish and feet. Japanese seasons inscription on 4 sides (Haru, Natsu, Aki, Fuyu). Dish and feet are separate to print without support (glue them in the holes)(Print 4 foot). No support needed on any of the parts.
Scale 57 x 74 x 92mm Overseas version of Shirakami Fubuki's mascot character Sukon-bu (Su-Corns) for foreign viewers. The main difference between the two mascots is the cloth around the neck: Japan viewers have scarves while Overseas don…
Yas Marina Circuit, Abu Dhabi, United Arab Emirates, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…
