Counting matching models…
Two-part print. Use glue and filament as connecting plugs when piecing together both parts. Update # april 24: Reduce the height from 110 mm to 100 mm in order to get better clearance due to carpet thickness variations. Slim Version is…
This is a type of bench/seats found on austrian trainstation platforms. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 0.1mm Notes: I disabled support roofs in Cura due to the added…
This umbrella hook can hold up to two umbrellas on the back of your backseats in the car's trunk. Just make sure there are those tether points in your car (see photos), I think they are standardized - at least in Germany / Europe. Just…
Update 2022-07-19: There's now a generic version of the vent adapter which attaches using zip ties, and two different nozzles (45 degrees and 60 degrees). This is an adapter system that clips on to the rear centre console vent and…
This is a modified electronics box cover for 3D Sets Landy model 3, that makes it possible to remove the seats in order to access electronics underneath, without disassembling half of the car ;) There are 3 files: box is the main body -…
When the car isn't born with cupholders in the rear seat armrest and your passangers want to enjoy a cold drink an not hold it all the time, a cupholder is the obvious fix for that. I couldn't find anything on the itnernet that would fit…
Bmw E30 - front seats sleds nut cap, for early model after 09.1985, and late model. OEM-number: 52 10 1 941 999 Reproduced from the dimensions of original part. Fusion360 source-files (*.f3d) attached.
This safety belt alert stopper clip is designed so that it stays below the seat, and has a hole for attaching a rope to pull it off. Before you hurry up commenting that you shouldn't use one, let me explain why I made it. My Tesla does…
I needed cupholders for the middle seats of my Tesla Model X. This fits the 2020 6-seater seats and hooks onto the seat next to the seat belt holders as shown in the picture. The cupholder size is designed to fit a 32oz or 40oz…
My BMW E39 was missing some fan grille parts for the rear seats. The CAD drawings have the exact same size as the original parts. So it just depends on how accurate your printer is (I had to sand down some areas). As you can see in the…
Bmw E30 - front seats sleds nut cap, for early model and only before 09.1985. OEM-number: 52 10 1 913 670 Reproduced from the dimensions of original part. Fusion360 source-files (*.f3d) attached.
Land Rover Discovery 3 3rd row seats lever cover. Print instructions Printer Brand: Prusa Printer: i3 MK2.5 Filament: Any ABS
Bmw E30 - front seats side cover clip (fastener). OEM-number: 52 10 1 906 933 Reproduced with the dimensions of original part. Perfectly fits on its original place. Will fit on original stock seats, sportsitze, recaro. Some sanding…
Uses same screws except requires 8mm steel shaft (I used DIN 931 8.8 M8 x 120 bolts shortened with with heads removed) through rollers. Only works with 2 inch belts. Suitable for high torque applications. The orignal model with…
Bmw E30 - front seat belt bolt cap. OEM-number: 72 11 1 808 464 Reproduced with the dimensions of original part. Perfectly fits on its original place. Will fit on original stock seats, sportsitze, recaro. Some sanding (~220grit) and…
I fitted the slim box for the Prusa MINI and add some connectors to try to help the assembly.
Mount for Garmin Varia or compatible accessories to fit a Bontrager seat with the blendr fitting spacing Edit: Added .step and .3mf files because its what I would have wanted.
I added connectors to the awesome Duplo bus by Nusel. Now the old style Duplo people will stay in the bus when they're on a bumpy ride.
Clips in under the front seats to light the rear seat floor. Checked the fit on my Ford Focus MK4. Installed for the AE ambient light kit: https://a.aliexpress.com/_EHuvyLl
Seats are designed for DUROCK MX Hotswap Sockets. The test print stl is to calibrate your settings for everything to fit before printing the entire bottoms. I also used hot glue to give some extra security to the sockets.
This model was made because the “munchkin” brand potty seat we got for our toddler did not come with a hook. This hook fits over tanks that are 13mm thick or less. The potty seat it was tested with is the munchkin brand. It should fit…
OEM spare part for Zafira B rear foldable seats' handle clip. Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Devil Design PLA Yellow Notes: Print with supports from bed only. 0.5 nozzle maximum. Category:…
On the Sovol SV08 MAX the original sliding seats (the things that connect the X-Axis to the Y-Axis) the position of the pullys that deflect the belts aro horrorbly wrong. They cause the belts to form triangles that leads to the fact that…
The holder is printed in three parts, without support. Originally I wanted to use ASA or PETG, but due to warping I had to change to PLA. But the angle holders are printed in PETG. The parts are connected with M3 screws, the angle holder…
This is a Car Fan Funnel. Both bigger parts can be connected with a hose or pipe. This was used to cool down a childs seat in the car when driving in summer at hot temperatures. So the child seat gets cooled. The funnel end has to be…
This is a seat I created for a Gscale LGB train bash/build im doing. I needed my own new seats for the model and created these. There is a single seat and also a treble.
Replacement seats for the Paw Patroller vehicle. I used 10% infill when printing and no support.
My 2007 Honda Jazz front seat sliding lever broke, so I designed a new one to replace it. I printed it in ASA with 5 walls and 40% infill. There are 2 STL versions one with normal and one with tighter fit, start with the normal one and…
Camping chairs often sink in sand or loose ground. Mine didn't have disc feet, so I made some that would work in sand and on uneven ground. The feet is pushed onto the existing rubber feet with a little force. It fits on rubber feet with…
Removable seats modification for the 3dsets model 3 Landy pickup. Allows access to electronics without requiring disassembly of the interior. I remixed an original model to remove the reliance on a metal spring, which I was unable to…
Here are the Seats, which you can use for the Paddock Stands; Paddock Commando Stand von Urs Hofer | Kostenloses STL-Modell herunterladen | Printables.com 1:43 and 1:100 enjoy
This model is for a second generation Trek Checkpoint (2022+). I created a mount for the first generation Checkpoint here https://www.printables.com/model/160973-fender-mount-for-bontrager-flare-r-city-on-trek-ch I printed it with the…
Love these new Brompton Be Seen lights but I'm rocking Brooks seat so no mounting point for the rear light, also because I use under the seat bag I've designed seat post mount for it. Designed specifically for telescopic seat post but it…
My friend collects Tonka Toy Trucks. He mentioned that a lot of the 1960's vintage Tonka Army GR 2-2431 trucks are missing their bench seats in the back. I designed and 3D printed seats. The color isn't perfect, but the closest filament I…
this is a 1/35 scale M4A3E8 Sherman seat for loader and tank commander made by request for someone on facebook. marked as WIP until its been fitted to a Sherman and conformed to be accurate. Print Settings Printer: cr-10 Rafts: Yes…
I made these cupholder adapters for coffee cups but I was inspired by Leapnlarry's "RV Cup Holder Adapter for Coffee Cups". They is made to fit the cupholders in the movie theater seats in a Grand Design Transend Xplor 297QB. Print…
Hubice vysavače sencor pro vysávání úzkého místa u sedaček aut. Sencor vacuum cleaner nozzle for vacuuming narrow spaces near car seats.
I needed seatbelt clip to stop beeping when I put something heavier on back seats of my Mondeo MK5. Normal clip which I found on printables wouldnt fit so I had to create new one. Print with no supports.
Hey together, long time ago, a Thalys from the Hobby Series from Mehano arrived here, shockingly it had whether a Cockpit nor seats in the 2 delivered coaches. A likely long time ago I decided to make cockpit and seats myself. Now it is…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Miniature 1:12 scale row of three cinema theater seats…
Part is not possible to buy separately and the complete part is out of stock. Second hand really hard to find.
I needed to route the wires from ESC and lights in a different route than the build guide recommends because I have receiver in the battery box. Hence I made “holes” in original base seat part.
OEM Zafira B (Opel/Vauxhall) Rear seats desk shelf holder. This part allow o keep the desk shelf both in un and down position. The metal spring apply a huge force into it. Print Settings Printer: HE3D Tarantula Rafts: No Supports: Yes…
Royal Enfield Classic 500 Seat Spacers - For Aftermarket Seats (print 2 of each) 15x6 (rear) and 15x4.5 (front) 8mm hole The brackets are too wide and these bushes fill the gap. Fitting Notes: When fitting the rear seat leave all bolts…
This is a stabilizing strut, for attaching the Vélo Orange™ Constructeur Rack on the rear of a bicycle at the seatstay-arm bosses. It is sized for a medium-size Vélo Orange™ Pass Hunter frame (2nd generation, circa 2020). Mounting Two…
The intent is that a user would print this and then attach a topper that would be made to fit your cup holder of choice. The top of this base is just above the high points around the factory cup holder. When adding to a topper you may be…
A shallow XJ-style interior built for my Traxxas TRX-4 Sport High Trail with an aftermarket Cherokee hardbody. It clears the chassis beneath a raised front floor and a higher cargo cover. The photos show the finished painted installation.…
This remixes the excellent single 2U rack mount panel from Maurício and makes a 6U version with mounting holes for the WinWing MCDU and a spacer to allow it to sit flat without rocking. Like the original you need 6 M4x8 hex screws and 6…
Would you pay $80 (each) for replacement heated seat warmer switches or coble up some replacement to use up parts you had laying around? Exactly, me too! And that's exactly what I did. I had some left over safety switches ( here ) so I…
Side wall for seat for T3
The original mount is rigid. One can bend the Steel support, but that not the way to go. This Plates replace the original and the backrest ist flexible now. I added two piece of soft rubber wich add a litte resistance. works like a charm
Those are the seats of the coaches (Annie and Clarabel and the Express coaches)
My parrots recently picked a new favorite spot, and I got tired of cleaning it every day. So I designed this simple perch holder. It comes in three sizes : Eco – uses less filament but requires a piece of paper or thin cardboard (~0.5 mm)…
I have bought this kit from aliexpress ( https://www.aliexpress.com/item/1005007953528214.html ). i have fitted in my corsa and made an adapter to fit the 2 controls, along with the ciggarete lighter!
Description: I used the original plastic frame around the hinge (mounted to the trunk) as the base for this model and built the cover from that. It’s not perfect by any means, but it does the job — and honestly, it looks pretty good…
I try to mount my bicycle rear lights as high up as possible. All of my battery powered bicycle rear lights are optimized to be mounted right below the saddle on the seat post - the ideal position. Unfortunately in my case this space is…
I printed it in pla, seems to be holding up pretty good so far. Not sure what size the fenders are, but they are about 5.4 cm wide at the widest point. (I have 700x35c tires, and could probably go bigger).
Those are the seats of the coaches (Annie and Clarabel and the Express coaches)
Would you pay $80 (each) for replacement heated seat warmer switches or coble up some replacement to use up parts you had laying around? Exactly, me too! And that's exactly what I did. I had some left over safety switches ( here ) so I…
This 3D-printed MagSafe attachment features a practical hook designed for easy mounting to car and airplane seats. Ideal for travellers and tech enthusiasts, it provides a convenient way to secure your devices, ensuring they stay in place…
Early in the '86 Movie, we see our Heroic Autobots operate across their off-Earth moon bases, and crewed their monitoring and communications stations from these crew seats! And so, as a different display and playset option, here's the…
My problematic chair has a solid oak frame but the seat is made from a relatively thin plywood. The seat is mounted using four sheet metal angled brackets to the frame, with only a single wood screw into the plywood seat. This screw…
A 3D printable replacement for the rubber hatch pin seats designed to be printed in TPU to prevent hatch creaking issues
The buttons to turn on the heated seats in my 350Z are located on the center console and are very easy to accidentally hit with my arm. This often leads to uncomfortable drives in the summer until I realize once again I accidently hit the…
I printed it in pla, seems to be holding up pretty good so far. Not sure what size the fenders are, but they are about 5.4 cm wide at the widest point. (I have 700x35c tires, and could probably go bigger).
This model is compatible with the lego system.
Housing for Ford vehicles climate seats control module, just the bottom part.
This tool is used to tighten M6 nuts when the screw is much longer . This is typically found on toilet seats. Features M6 nut Hollow inside: an M6 bolt can be as long as you want. 8.5cm long I have printed it with PETG and used it…
This is a keyboard holder for mini TKL keyboards. It's made for the slightly angled bucket seat bracket made by https://sim-lab.eu/ . It works best with keyboards around 30cm. The Logitech MX Mini is perfect, for example.. The REAR…
Best printed with PETG but PLA works well too and I used 0.15mm height. I've included the Fusion360 parameterised model in case the angle of the seatstay needs to be tweaked. To do this, edit the angle of the plane geometery in the third…
Printed with PETG and 100% Infill. I attached the connector with glue. If the connector does not fit due to tolerances, you can also create your own. The dimensions of my model are 8.8x5.8x50 let me know if you need other tablet sizes.…
The intent is that a user would print this and then attach a topper that would be made to fit your cup holder of choice. The top of this base is just above the high points around the factory cup holder on the rear seats. When adding to a…
This AC duct will direct AC air directly into the fan underneath the seat. Fits 2006-2011 Lexus GS Results will depend on on your seating position and your AC blowing speed. For best results put your AC direction to the legs. You wanna…
