Counting matching models…
A simple yet super useful little bracket with a lot of strength. Works perfectly for reinforcing corner joints in wooden structures such as shelving units, boxes, and whatever has 90 degree corners that can hold screws or bolts. I use…
A Mounting Plate for Asetek Wheels / their type of Quick Releases. The holes are 40mm apart, so that you mount it on a
I STRONGLY RECOMMEND PRINTING IT LAYING ON ITS SIDE. There it is! For people who dont want to wait anymore. Here is a reverse engineered Version of Aseteks Quick Release for custom wheels. It has very little to no play and is rock solid.…
Allows you to mount the Simagic Haptic reactor on Asetek pedals. First attach the reactor to the bracket and then mount it on the pedal. No extra screws are required for mounting (to install on the pedal, the screws holding the pedal are…
CD/ Cassete modular stand to keep cds & old cassetes organized from old times. They can be stackable or put them side by side or hang them in the wall. They're light weight and fits like a glove. Print times & materials: CD stand: 12-13 h…
add : Mount for Pokornyi Pro Dash EDIT : 1 the parts are functional but I have to adapt the cable passage for the version with the design which is close to the original and the power button (or you have to adapt with a soldering iron to…
Project : https://simracing-pc.de/en/2024/08/16/diy-project-vocore-4-inch-screen-dashboard/ Web : https://simracing-pc.de Discord : https://discord.gg/V5ZKUj3weJ A small DIY project centred around the 4 inch VoCore display, consisting of…
No support required
Please, upload your printed parts here, i would like to see your prints. Micro SD card cassete box based on nokia n-gage game cassete boxes. I wanted some card box and i did not liked any from internet, even not printed ones, so i…
As promised this is a functioning part that replaced the Zortrax HEPA-Carbon filter. This can be used with the AirManager2 that can be found here:…
Simple device to reload 35mm films. For example you need to test new camera/lens/film and don't want to shoot all 36 exposures. You can make 3 rolls of 11 exposures each, out of 36mm cassete. It's especially usable if your film is not…
Edit : ADD mount for ASETEK invicta face plate and mount Edit : ADD for Simucube sport/pro mount, that was a request I don't have a Simucube, print the first two layers, stop printing and test on your base if the holes match (normally it…
I made myself a mount for the base. You can download the quick release mount for the steering wheel here: https://www.printables.com/model/425542
Footrest for Asetek Invicta pedals
Remix of the model created by PierceRylee1969! Send him your thanks, he rocked it with this one! NOTE: You will need (4) m6 x 25mm screws. (About 10mm longer than OEM)
The Minisforum ITX boards support an unusual hole placing for the cooler mounts, 52mm on the edges. The model by NAnglo uses a slighty wider spacing, therefore I needed to adapt it a little bit. Print with temperature resistant and robust…
Project : https://simracing-pc.de/en/2024/08/02/diy-project-vocore-3-4-inch-screen-dashboard/ Web : https://simracing-pc.de Discord : https://discord.gg/V5ZKUj3weJ With the 3.4-inch display from VoCore, which has been available for a few…
Diseñamos un Funko POP - Masetero- Ballerina - Ballet, para un cliente, saludos y exitos
This is a Dash Pro mount that will fit onto Asetek Wheel base LA Prima, Forte or Invicta. I will upload an additional Version that has no holes for dash so you can use any Dash you want. I recommend printing this out of PLA for rigidity.…
Precioso Llavero de cassete de musica antigua, version NFC. En la capa 15 hace una pausa para añadir la etiqueta nfc.
Print no need for support, print with the motor plate on the bed side i printed @ 100%, but 50% it's okay you have to put the screws in before mounting the motor, unfortunately the crankset spacing is barely smaller than the motor Step 1:…
For allAsetek pedals (la prima/forte/invicta) and with the original bolts between the pedal plate and tapped holes.
Button for Asetek streering wheel. Full replacement for standard (grey and orange) buttons. Possibility of printing with an FDM printer or using RESIN printer. For printing, turn the model upside down and print on the supports. To install…
Asetek Rumble motors, please see photo as how they fit, 4 bolts and nuts needed to secure to pedal. Pedal plates must be mounted one hole higher!!! No supports needed, print on flat face
EDIT : add mount for Velocitas Imperium ( to test ) Version bêta, une v1 sortira avec un PCB pour que cela soit plus propre. Vous devez passer le câble dans le mount ou sur la faceplate avant de souder, car une fois soudé, le câble ne…
Just replace the existing screws with M6x50 screws to mount the dashboad on the wheelbase. Web: https://simracing-pc.de Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer Brand: Anycubic Printer: Vyper **Rafts:** No Supports:…
Pedal mounts for Xbox style rumble motors onto the Asetek La Prima sim racing pedals. I did not like having the motors exposed as most existing designs have and didn't want to use a clamping method either. My motors have a strip of foam…
These are custom “Winchester” and “Winchester Super X” I designed lids for my 22LR Bullet Holder . I have also designed a bunch of CCI lids as well as a Remington lid. For the “Winchester” lid, you can print the base layer in black or…
This is a better version of this cassette. Just plain easier to print and does not require glue BUT The outer shell should be printed with 0,4 line width . you can try to go thicker, but i can't assure that the slicer will slice the…
Project: https://simracing-pc.de/en/2022/06/20/diy-project-alternative-pedal-plates-for-the-asetek-invicta-pedals/ Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer: Anycubic Vyper Rafts: No **Supports:** No Resolution: 0.16…
# Organizador Casete DJ "Carla" (Multicolor) ¡Dale un toque retro y musical a tu escritorio con este original organizador! Este modelo tiene la forma de un clásico casete de música de DJ, personalizado con el nombre "Carla" . Es ideal…
Asetek Invicta spacer with logo and M6 screw for block
This uses the existing top and bottom holes of the pedal plate, if you use these to mount to the arm this will not work for you. Print upside down so that your pedal plate is nice and smooth M5/20mm countersunk hex bolts used and M5…
After making the smooth and wider throttle pedal plate I was asked to design the brake one too. I have make the plate a little thicker to compensate the extra braking pressure This like the other plate I made would take the M5 countersunk…
Pour changer la couleur de orange vers blanc. A réaliser en TPU J'ai utilisé le varioShore de Color Fabb (natural color) Buse de 0,6mm (faisable sans soucis en 0,4mm) avec 2 perimètres, 2 couches inf et sup et 50% de remplissage.
Asetek gen5 interface bracket that fits onto nvidia gpu
Here is a modded Heelgap-Plate for the Forte S Pedals. If they fit a bit too loose, just use a bit of double sided tape
I Printed it in PETG 0.2mm but I recon go 0.3mm. No Supports needed Very Sturdy. Use cableties to mount the PSU to the holder.
Project: https://simracing-pc.de/en/2023/08/08/diy-project-tactile-feedback-abs-effect-for-simracing-pedals/ Web: https://simracing-pc.de Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer Brand: Anycubic Printer: Vyper…
Dashboard holder to attach to the Asetek Front Mount, instead of screwing into the base itself. I was told by the manufacturer that tampering with the screws from the Asetek base could damage the warranty, so I decided to mount the…
nástěnné umění obrázek jeseter vytvořil jsem ho z obrázku jpg.
Are you tired of seeing the exposed wires on your 1000€+ Front mounted Asetek Wheelbase? Me too. So heres a simple Print to cover them up. It is one piece and doesnt need any support. I decided to give them a 90° corner, so that the cable…
🇩🇪 Der Griff für die C250/260 Kassette. Leider geht der Orginale Bauartbedingt öffter kaput. 🇬🇧 The handle for the C250/260 cassette. Unfortunately, the original one breaks down more often due to its design.
Project: https://simracing-pc.de/en/2022/06/13/diy-project-new-end-stop-for-the-asetek-invicta-pedals/ Discord: https://discord.gg/V5ZKUj3weJ Print Settings Printer: Anycubic Vyper Rafts: No **Resolution:** 0.16 Infill: 30 **Filament:**…
Game Boy inserts for cassete box I buy from aliexpress some cassete boxes for my GBA games and discovered they where incompatible (not close well) so I modfied some ones to make it fit GB/GBC made by @EntirelyTom_2031571 GBA made by…
Print settings Print wedges, mid section and bottom in ABS at 100% infill with a 5 mm brim. Enable support only on the bottom section where the M6 bolts are countersunk. Print the lever and pin in PETG (100% infill recommended) for a bit…
Asetek Invicta Clutch pedal smooth pedal plate These make the pedals sock friendly or nicer for someone that wants a smooth pedal Uses 2 countersunk bolts (will need to be sourced) and nylock nuts to hold into place. Print upside down so…
Adapter to use a Bosch Blue 10.8V battery in a Basetech (possibly others) tool. Use spade connectors and nickel strips to complete the electrical portion of the adapter part. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts:…
Adapter for the SIMDID DV480 Dashboard on Asetek Bases. U need 2x M6x50mm to adapt to the new length of the adapter.
Asetek Rumble motors, please see photo as how they fit, 2 bolts and nuts needed to secure to pedal No supports needed, print on flat face Category: Other
SETEC ASTRONOMY - TOO MANY SECRETS, License Plate Frame Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
I wanted an easy way to mount a phone or ddu to my Asetek La Prima wheelbase. I created this model with a GoPro interface os it remains universal. → You will need 2x M6 45mm allen cap screws. → The hole spacing is 100mm I use an old…
Here is my mount for the Lian Li 8.8" Secondary Screen. It is designed to fit the Asetek Front Mount, it is press fit, and the monitor being an all metal design means that the weight of it keeps it in place I have shown the longer version…
BASETech is a common remote sensor for weather stations. They are sold as Basetech WS-9130-IT, TFA Dostmann 30.3147.IT, Techno Line TX 35-IT and more brands. Although it should be able to survive on its own, a casing might prevent…
BASEtech Powerbank Enclosure Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Infill: 20% Filament: OWL Filament PLA Category: Mobile Phone
This 3D-printable mounting bracket is designed for strong and reliable structural support in custom mechanical and electronic projects. The reinforced rib structure improves rigidity and reduces flex during operation, making it suitable…
The handle cushions allow you to adjust the color of your Asetek steering wheel. Material for FDM: TPU (softer is better) Printing settings: Perimeters: 1 Infill: 15% Layer height: 0.15mm Supports: no When putting on a smaller piece,…
You will need a very flexible filament for the smaller replacement part if you do not want to cut it to fit. Web: https://simracing-pc.de Discord: https://discord.gg/V5ZKUj3weJ Print Settings Rafts: No Supports: No **Resolution:** 0.16…
I needed to save some space on my desk, and this bench PSU takes up a bit of space so I thought to help hide some of the stuff on my desk I would make this stand with a drawer to help organise things. This is a large model and requires a…
Undertale Album on cassette made for my little brother's 6th grade promotion!
requires 4 4mm heat set inserts to mount the 120mm fan and 4 15mm m3 standoffs between the block and the printed part. Longer standoffs would be fine, but 15mm is the minimum. attach the printed part to the standoff with 10mm m3 bolts and…
Creation based on two existing models (Simucube wheel stand and Asetek wall mount)
Basetec Bench Powersupply (PSU) Holder
I saw many trays available but I didn't like the ones there were, so I designed mine. I hope you enjoy it
My Asetek Forte Pedals have an oddly placed USB port. There are two threaded M6 holes near the usb port that are unused on my setup. I made this clip to hold the USB cable securely. The clip will hold a 3.8-4.2mm cable securely. 2x…
Some repair operations on sony Betacam SP VCR PVV-3 require this fixture. Never saw a rel one, so i created this based on illustrations from service manual. It is not perfect but it does the job. It is not as rigid as this part should…
This is an adapter plate to mate the Asetek Formula Forte Pro, to other QR adapters for other wheel bases. It's meant to cut down the added shaft length from using all the Asetek adapters, on top of the factory Asetek Mount, on top of the…
whit this model you can mould fimmo clay in a casette shape
Reinforced 60° offset bracket for mounting a shelf or panel away from a vertical surface.
cassete tool holder, made for one from aliexpress (riderface or smth like that). If you want i can share .f3d file
Vocore 4'3 screen 18 WS2812B LEDs 8 x N52 Magnets 6x3mm Arduino Pro Micro Resistor 470 Ohm (Recommended) GX12 Male+Female CH334F Mini USB hub Coiled USB C to A cable 4x M3x16 screws 2x M3x10 screws 6x M3 heatsink inserts 2x M4 screws for…
Bohrerkassete für Gridfinity 2x3 Einheiten klappbar (bewusst sehr leichtgängig) 1 Kassette mit 2x3 Gridfinity Einheiten 2 Verschiedene Einsätze ein Einsatz mit 5 Plätzen für Sechskant von Bits und Bithaltern ein Einsatz mit Löchern 4, 5,…
This is a box i have made for the iexos, its for the fysetec e4 with onstepx. There is room for more expansions, i have a LAN plug controlling an autofokuser i built myself. V2 version has either 2 fokusers, or one fokuser and one…
I printed this pedal stop pad out of 95A TPU. It slips over the pedal stop screws on my Asetek Forte Pedals to silence them.
There is a AM4/AM5 retention kit for Asetek based AIOs[1], e.g. from ASUS for the ASUS ROG STRIX LC II 120 ARGB, or ASUS ROG Ryuo 120. If used with the Thermal Grizzly AM5 High Performance Heatspreader, the contact pressure will be too…
For use with a M3 hexagonal nut.
**Wall hooks you can rearrange. Screw the plate up once — hooks dock anywhere. Free.** v3 — ForgeHook is now a Gridfinity system. v2 fused six hooks onto one breakaway batch plate: every hook needed its own screws and the layout was fixed…
requires 4 4mm heat set inserts to mount the 120mm fan and 4 15mm m3 standoffs between the block and the printed part. Longer standoffs would be fine, but 15mm is the minimum. attach the printed part to the standoff with 10mm m3 bolts and…
The Minisforum ITX boards support an unusual hole placing for the cooler mounts, 52mm on the edges. The model by NAnglo uses a slighty wider spacing, therefore I needed to adapt it a little bit. Print with temperature resistant and robust…
Here is my mount for the Lian Li 8.8" Secondary Screen. It is designed to fit the Asetek Front Mount, it is press fit, and the monitor being an all metal design means that the weight of it keeps it in place I have shown the longer version…
3D printable topographic miniature of Seter helgådalen - 🇳🇴 Norway Capture the beauty of Seter helgådalen 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 63.835,…
3D printable topographic miniature of Seter helgådalen - 🇳🇴 Norway Capture the beauty of Seter helgådalen 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 63.835,…
