Counting matching models…
Description : Sovol dryer is perfect but the underside gets very hot. This holder protect the support and help to dissipate heat. re-use original pads hold in place without glue Version : V1 (deprecated): - Perfect for my dryer V2 : - Add…
Sovol SH01 Filament Dryer PTFE Grommet The available grommets that I found did not line the entire filament path with PTFE tube so I created two options to solve this (see pictures for cross section): “Normal” - This was the original…
Some custom parts and other mods for the SOVOL SH01 filament dryer (also badged under the brand Comgrow). I noticed there was a decent cavity towards the back of the box that's blocked off and designed this alternative insert to make that…
Stackable Silica Box 6 per dryer or up to 3 with a spool Support on build plate only (edited) PETG PS : compatible with similar formfactor models
Update 24 Feb 2023: Added new versions (V2) and (V3) with some minor tweaks. Made the claws slightly weaker and the gap for the filament to snap into slightly smaller. PLA print tested working with Sunlu S2 Filament Dryer. A thinner and…
Silica gel holder that fills the unused space in the bottom of the SOVOL SH01 Filament Dryer. Print with no supports, oriented with the opening up, so the grids are bridges. I used PETG and it works great. You'll have to snap the spool…
Optimized version to remove all the overhangs and print it supportless, it saves almost 40g of filament and the half printing time than the original. Personally I didn't use the base pieces but added in case you requires it, just super…
This is an insert for the Sovol SH01 that works with 3010 blower fans directed through ducts directly at the source of heat for significantly better air distribution and improved heating. The result is faster heating, less hot spots in…
Holder for the Sovol SH01 Filament Dryer's Power Supply, featuring Central Screw Holes
I tried other models of dessicant containers meant for this model of filament dryer but none were easy or worked well. I made this model that simply slides into place and had an easy to remove lid for quick removal and refilling of…
I made these plugs for the holes on top of the dryer as I added two holes on the side to guide the filament better as I have the dryer on top of my lack enclosure. They should fit snug if not use a drop of super glue or another glue to…
Here is an improved version of my PTFE guide for the Sovol SH01 dryer. The goal was to remove the hinge of the original lid and have an easy on, easy off lid that I can just take off even when filaments are inside the dryer. You just need…
I created a shorter version of the original box wedge from ZerOz. It allows me to get even lower humidity levels.
Upgrade for Sovol SH01 Da die Feuchtigkeit bei dieser Bauart von Filamenttrocknern im Gerät selber verbleibt, erkennbar an beschlagenen Hauben etc., ist es notwendig die Feuchtigkeit aus dem Gerät zu bringen und auch dort zu behalten.…
Clip on filament guide for the Sovol SH01 Dryer. Use your choice of PTFE tube. Insert into guide. (50mm Capricorn PTFE Tube used in pic) Clip on to dryer and ready to go! Holds open lid for better drying. Clip onto spool and close lid…
A simple way to attach a hygrometer to your filament dryer. I noticed the accuracy was not quite right on my dryer so I added this as a second check.
Hi, I designed a bracket to hold my square 45x45mm hydrometer in my SOVOL SH01 filament dryer.Simple and effective. No additional hardware needed. No support needed. 13/01/2026: made V2 and V3 because I found that the hydrometer could…
permet un bon guidage du filament utiliser un roulement 608
Comgrow sh01 dryer ptfe grommet. This one will test your print settings. Prints in TPU. If your settings are off you can scale it a few %. Pulls through from the inside, PTFE is friction fit just push it in. I printed with .6 nozzle and…
I needed a solution for filament dryers taking up unneccesary space so I designed this to help eleviate that problem a bit more. I would only stack these one to two high though becuase the weight can become a problem unless i guess you…
I had difficulty with the original model (the M6 bolt broke while installing), so I ended up creating adapters to make it work. After using it for some time, I decided to make a proper remix and make a few other adjustments to print from…
A first version of a remix of the downward facing PTFE guide. A small filament PTFE guide to clip onto a Sovol SH01 filament dryer. The filament outlet is facing upward like Creality Space PI dryer or other boxes. Like the original…
A simple way to attach a hygrometer to your filament dryer. I noticed the accuracy was not quite right on my dryer so I added this as a second check.
Print 2 brackets to mount your Sovol SH01 to the Anycubic Kobra. Used double sided gorilla tape between the foot prints Zip tie holes for secure mounting *See Pics Filament Guide Optional Printed in PLA 4 Walls no supports 20% cubic infill.
Print 1x male and 1x female for each coupling required. Printed with 0.4 nozzle at 0.2mm layer height.
This is an excellent model to raise your dryer. Mine needed to be higher so here we are.
A grommet for the Sovol SH01 that allows a for a standard 4 mm outer diameter PTFE tube to pass through. With the standard hole size in the Sovol SH01 and subtracting the 4 mm for the PTFE tube there is not much room left for the grommet…
Remix of the riser by @lochej_2068433 I added a front ventilation door with print in place axle/pivot. You still have to use the original ptfe guides.
Custom desiccant bead box with mini hygrometer for Sovol SH01 filament dryer. This remix adds a hygrometer hole on top and secures with M3x16 hex bolts. Perfect for keeping your filaments dry and happy! A higher temp tolerant filament…
I Closed the gap for the ptfe tube as I use a PC4-M6 in the top/front of the dryer, all credits goes to @pizzai69 Still going to take a day or two for me to print I will add photos when its done
I printed one of the valves from Hunter Rodrigez, and mounted it the top of my Sovol SH01 lid, in the exact middle, only to realise that I was then unable to close the lid of the box, due to clearance issues. I took some measurements off…
Unintrusive shelf for desiccant / silica gel for the Sovol 3D SH01 Filament Dehydrator. Affixed to the back of the lid with hot glue
