109 models
Info: another hand model for valve cap ALOHA! Not for presta valve! Print instructions: 0.4mm nozzle works good for me (for my MTB), I have already scaled original to best fit, so just print this at 100% scale or adjust slightly. 3mf file…
The shaka sign is a gesture of friendly intent often associated with Hawaii and surf culture. (from wikipedia). Thanks to soozafone for their original design Lucky 13 Printable Jointed Figure
Easy to print in place. Will fit on a 180mm X 180mm build plate.
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
A great wall art of a shaka sign. Do not forget to LIKE the model and upload your makes, thanks ! Inspired by a sticker
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Info: cabinet knob / drawer handle M4 thread on the bottom for attaching Print instructions: nothing special
Easy to print in place benchy dragon supports are needed under upper jaw and chin - a brim with a .29 offset may be useful
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
개인의 손 크기에 따라 몇 가지 크기를 함께 올립니다. 파라메트릭 숫자를 조정할 수 있습니다. 본드로 결합하면 됩니다. Raise a few sizes together based on the size of the individual's hand. You can adjust the parametric numbers. You can combine them into a bond.
Residents of Hawaii use the Shaka to convey the "Aloha Spirit", a concept of friendship, understanding, compassion, and solidarity among the various ethnic cultures that reside in Hawaii, lacking a direct semantic to literal translation.…
A small project I had to make for a class. simple design figured why not post it.
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Given that there aren't too many snuffbox trees growing in Canada, I had to improvise when trying kashaka s. You're probably better off buying the real thing. Pick the diameter to suit your hand size in Customizer. Smaller might be…
a touch of aloha with a Hawaii shaka hook
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Easy to print. No supports needed. Depending on your print bed adhesion a brim may be used. Will fit on a 180mm X 180mm build plate.
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Easy to print in place vase, does not print in vase mode. I printed with a .6 nozzle at .28 layer height. If you would like to sell prints of this model please join my club.
Hawaii Shaka knob, petg cf with a .6mm nozzle. Made for a 4mm screw. Aloha
Very simple design for Kashakas. There's one half of a hollow sphere that has a lip that fits into the other half of the sphere. The lip portion on both halves has a small groove where you can put a 1mm CS/41mm ID o-ring for a kind of…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Hawaiian Shaka jibitz, print face down or up using support.
Hawaiian heart double Shaka
Residents of Hawaii use the Shaka to convey the "Aloha Spirit", a concept of friendship, understanding, compassion, and solidarity among the various ethnic cultures that reside in Hawaii, lacking a direct semantic to literal translation.…
pushaka/Tzedaka box/charity box/#give charity/tzedakah I redesigned it but the guy doesn't allow remixing so i put it as my own model
Very easy to print. I use a .6 nozzle and print at .18 layer height
Hawaii Shaka Meal Box, I used 1.75mm filament as the rods for the door hinges. Printed the doors lids facing down.
First (sensible) try at a half shell for these shakers. You'll need to print a minimum of four to make a single set; eight shells makes a two-hand set. These are sized for quite small hands and for narrow (~ 5 mm braided black dacron)…
MOLLE loop Hawaiian Shaka for your gear! I wanted some Molle Loop Flair so I mixed a few models and came up with this! My Meta Quest 3 backpack needed an upgrade! So I sliced it for my U1 with some color, see pics! I printed these in PLA…
Shaka Hands – Dekoratives Handzeichen Set
Easy to print similar to the dragon. It can scale down to 180mm X 180mm print plate.
Easy to print in place Curved Horn dragon. Mini version prints on 180mm x 180mm
Easy to print in place articulated Ant/Bug scalable to fit 180mm X 180mm print bed, no supports or brim needed.
Easy to print in place dragon. I have scaled it down to 60% without issue. I normally print with a .6 nozzle at .18mm layer height. The wings are loose fit, if you wish them a bit tighter scale them up slightly.
Easy to print in place no brim or supports needed.
Easy to print in place dragon with wings. Supports are needed on the wings, I normally use tree organic supports. Depending on your bed adhesion a brim may be needed. I print with a .6 nozzle at .18 layer height. 2 walls. 15% infill.
Easy to print in place dragon. End tail link has spinning disc. Prints with 2 walls and 15% infill.
Easy to print in place no supports are needed.
Looking for something unique to give this Valentine’s Day? Skip the chocolate and print something that lasts almost forever! The Highland Heart Statue is now live for all club members. It’s cute, it’s fuzzy, and it’s leaning against a…
Easy to print with minimal support. Nice bear with a carved wooden look on a base holding a Valentine's heart.
Easy to print T-Rex inspired Dino holding a Valentine heart. It uses minimal supports. I like to use organic tree supports. It is available in the monthly and all files tiers.
Easy to print Dragon holding a heart. Supports are needed - I normally use auto supports.
I am incredibly excited to share the newest addition to the Shakaworld3D lineup. Check out the latest release: The Articulated Fixed wing Dino Skeleton Dragon. As you can see from the test prints, this intricate, skeletal design looks…
Hey everyone! I am incredibly excited to share the newest addition to the Shakaworld3D lineup. Check out the latest release: The Articulated Short Dino Skeleton Dragon. As you can see from the test prints, this intricate, skeletal design…
Easy to print single or multi-color dragon
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Easy to print - I normally print these with a .6 nozzle .18 layer height should not need support but a brim can be used depending on your print bed adhesion. There is a smaller version stl with 220x220 in the title I have printed it on a…
Easy to print should not require supports, may need a brim depending on your bed adhesion.
Easy print may require a brim depending on your printer
Easy to print may require a brim depending on your print bed
For the challenge print it as fast as you can without using supports and brim. For a better quality model use manual supports and brim depending on you printers capabilities. Thank you for taking the time to view this design, I hope you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Easy to print dragon may need a brim depending on your printer bed adhesion - two versions of file with one that will fit on a mini build plate 180x180 Thank you for taking the time to view this design, I hope you like it. Please consider…
Articulated Fish Killer Dragon print in place very flexible. Easy to print model in the sea creature/dragon series. - depending on your bed adhesion may need a brim and support the flippers in the bottom ring section. The purple/gold was…
Explore the astonishing world of 3D modeling with Shakaworld3D's Articulated Deep Sea Dragon, now available on printables.com. This one-of-a-kind 3D model brings to life a 52 inch long articulated sea dragon, easy to print and a sight to…
Easy to print horned spine dragon does not need supports. fits on a Bambulab A1 mini and a Prusa Mini. I printed the ones shown with a .6 nozzle at .28 layer height. You are only allowed to sell the prints from this file as long as you…
Easy to print in place dragon that is very flexible and makes a great fidget toy. No supports are needed. A brim may be needed depending on your bed adhesion. update added Belt printer version scales down to 12 inches
Easy to print Dragon I normally print with a .6 nozzle and either .18 or .24 layer height. Not supports need. May need brim depending on your bed adhesion. Can scale to fit a mini bed size.
Easy to print dragon that I normally print with a .6 nozzle .18/.28 layer height. No support needed. Use a brim depending on your print bed adhesion,
Easy to print in place dragon turtle that needs no supports and should print without a brim. I have printed with both a .6 and a .4 nozzle. can be scaled down to fit a mini build plate without issue.
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you…
Easy to print in place Dragon Book barn it will fit on a mini 3d printer build plate with short wings. No supports are needed a brim can prevent warping. I normally print with a .6 nozzle at .18 layer height.
Another easy print in place dragon inspired by a twisted rook in a chess set. There are files for printers 256x256 and a smaller version for 180x180. The larger file should scale well to fit smaller printers
Designed for 256x256 but should scale well. Unleash the power of 3D printing with this masterfully designed Bone Crown Dragon V2 by Shakaworld3D, a perfect pick for advanced and novice 3D printing enthusiasts. The model showcases…
Easy to print depending on your bed adhesion supports may be needed under the wings and a brim may be needed as well. Designed for 256x256 but I scaled it down to fit on 180x180 print bed Discover an incredibly detailed 3D model of a…
Discover Shakaworld3D's highly detailed, ornate Bone Crown Dragon Turtle 3D model available on printables.com. Immerse yourself in the realm of fantasy art and explore this awe-inspiring dragon turtle sculpture that effortlessly marries…
Easy to print in place dragon. I normally print with a .6 nozzle at .24 layer height. Print well at 256x256 and scales to print on 180x180 print bed
Easy to print similar to the dragon. It can scale down to 180mm X 180mm print plate.
Easy to print in place Curved Horn dragon. Mini version prints on 180mm x 180mm
Easy to print in place dragon. I normally print with a .6 nozzle at .18 layer height and on my mini with a .4 nozzle at .16 layer height. Depending on your bed adhesion it may need a brim.
