201 models
Push-In Rivets with Ribbed Shank. Commonly found in automotive interiors. Step file included Print in ABS, ASA, Nylon, 0.1 layer height recommended. [Updated 03122025] Repaired some mismatched structure, added V2 & V3 Added V2 with center…
If you liked the model, please publish it make) Print Settings Resolution: 0.1 Infill: 10%
A handle for t-shank jigsaw blades. Has ergonomic shape with finger rests. Does not require any additional hardware - all necessary pieces are easily printable without supports (do not change the model orientation). Using 0.8 mm width for…
Show you love for Chevy Truck with this Button
EDC Micro Series. Compatible with each other. See also: EDC Micro Knife - Keychain (Scalpel) EDC Micro Pill Capsule - Keychain EDC Micro Tools I EDC Micro Tools II EDC Series Box Continuation of the series. EDC Micro. The same capsule or…
Gridfinity hex shank drill bit holder. I've also uploaded a reverse engineered step/f3d file so you can customize!
This model is compatible with the lego system.
Container for hex shank drill bits, commonly available in a set of 13 bits from 1.5mm - 6.5mm. Space for a small screw driver handle in the centre. I get the drill bits and screwdriver handle from Ali, but they are available on other…
Pumpkin knife handle for using any T-shank jigsaw blade. There are two halves and a small key that sits in over the blade to keep it secured. One half uses heatset inserts: short #6 32tpi The other half uses 1/2" pan head #6 32tpi pan…
***Updated March 2026*** Winged Chisel Plow - 26 Shank 30ft - 1:16th Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to…
Remix of the 2.5inch Three Jaw Chuck with a hex shank, to allow use with a standard drill.
Chisel Plow - 14 Shank - Style 1 - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
Llavero basado en la serie de One Piece donde aparecen Shanks acariciando la cabeza del pequeño Monkey d. Luffy. Hay 2 archivos con distintos lados de argolla. El tamaño de boquilla y relacionado da un poco igual, hay que adaptarlo a tu…
I had a cheap (7.49) set of Harbor freight Titanium Hex Shank Drill Bit Set, 13 Pc. lying in the bottom of my tool box and decided the only way I was ever going to use them is if they where organized and in a case. So I got out the…
Keep all your bits close by, organized, and on hand when doing projects! Snugly fits up to 45 bits in an anti-tip base will keep your bits from flying all over the place!
I design 2 versions of the flag's logo of Shanks! Tell me your favorite! Enjoy
**EDIT 5/27/26 Made a V2.0 that should fit larger tuning buttons as well and utilizes an 1/4 hex bit shaft from McMaster-Carr Components. It printed fine for me without supports because the bridging is so small, but your results may vary.…
What the title says. The T-Shank interface is a bit tight and the comb got stuck when I put it in. Needs some dimensional improvements I've been too lazy to do yet. Category: Hand Tools
Works with most sockets and bits with a ¼" hex shank. You can throw these into your toolbag and the tools will stay in place . Includes two versions. This should be printed using TPU filament; flex is important here. As typical for a lot…
This is a simple holder for mounting longer hex shank bits. Most of the other drill bit holders I've seen mount using a hex shaped hole that the back of the bit fits into, but that means the business end is sticking straight up. That…
The Chrysler PentaStar button
Three sizes are included, 4, 5 and 6mm measured between the flats of the hexagonal shafts. Attach the screw fastener to the screwdriver an twist the screw in about half-way. Release the screw head from the holder by lifting the tip of the…
Chisel Plow - 10 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
A gridfinity tray to hold 100mm (sometimes sold as 4 inch) bit driver sets. Each tray is 1x3, but they can be stacked to save space. There's clearance at the top to easily get a finger in to remove an individual bit.
Non-standard metric size Allen keys: 11mm, 13mm and 15mm. Screwdriver with 15mm Allen Key Shank Combines screwdriver functionality with a 15mm Allen key. Allen Keys: 11mm, 13mm, 15mm Perfect for hex bolts and screws. Print settings Layers…
Chisel Plow - 12 Shank - 1:16th Scale Uses M2 Screws Recommended to resin print shanks and hydraulic cylinder Hydraulic cylinder uses a 3mm x 21mm rivet 1.75mm TPU used for hydraulic hoses
This tapered router bit holder holds four ¼" shank router bits on a vertical surface. The holder mounts with two #6 wood screws. The holder is 2.5" tall and 6" long. V2 has 4 holes spaced at 1.5" (shown in image) V3 has 7 holes spaced at…
Ford Truck owner Proud button
Simple safety guard to protect your finger from accidentally getting in the path of the needle.
print it like its shown in the 3rd picture no supports you will need 2 M3x6 screws, nuts and the blade
4x3 Gridfinity Holder for the Stupid Simple Tools (SST) 1/4" Shank Tramming Tool.
I've created a presser foot holder shank compatible with Husqvarna Viking sewing machines, including the Jade and Sapphire model lines. This 3D-printable design allows for easy attachment of presser feet and serves as a replacement part…
I couldn't find a jigsaw blade storage option that accommodated long and/or wide jigsaw blades such as ones intended for metal so I designed this one for that purpose. 5 slots able to hold up to 7 blades per slot. slides together and…
The Shawshank Redemption - The Escape - 1994 3D printable model.
Modification of TaylorsMake's end mill tray (from TV) to hold bare US standard 3/8" shank x 3.25" long double-end mills. The mods are: Higher density single-row layout holding 18 tools without the individual plastic cases Thicker…
Shawshank Redemption - 1992 3D printable model. Prints in 4 parts. The figure, the prison wall, the sign post, and the sign. Resize each to your needs and print!
Decided to make some holders for my forstner bits in my tool chest. These are as universal as I can think to make them as there is some variation in shaft and shank lengths, but the diameters seem consistent. I based these off of…
This will snugly fit this 0.3-8mm keyless drill chuck on Aliexpress . If you find it is a tight fit you could either print slightly larger or lightly run a file/sandpaper over the faces on the shaft of the chuck. Modifications from the…
Created using the FigBash beta figure builder program. FigBash is a digital action figure kitbash system. Create the action figure of your dreams by selecting its features, from hairstyles to clothing! These are 3.75 inch action figures,…
Extended nozzle wrench insert to fit 20-50 mm long hex shank socket adapter. Very tight fit for maximal torque power and no slipping. print settings: 0.20mm filament: PLA (tested on Fillamentum) 15% gyroid infill I recommend vertical…
T shank jig saw blade holder with internal blade storage. use two M2 x 12 hex head screws and two M2 hex nuts. Designed for Pumpkin carving but has variety of hobby applications.
Print in TPU/Flexible filament. There's a “test” unit of just 3 bit holders to print and test to make sure the fit is correct before you print the larger version. There are holes to view the bit size as well as small “nubs” to hold the…
This model is an additional tool accessory for luma's “ DDD Printable Wall Control System ” for Wall Control's powder-coated, slotted metal pegboards. It stores up to 36 T-Shank jigsaw blades. The back row accommodates blades up to 1.8mm…
I really like the design of this wire twister , but I needed one with larger holes. I thought my heavier wire might cause the printed shank to snap off, so I decided to make it use a ¼" hex bit for extra strength. I printed with external…
I've created this model to be able to use the chuck with manual operation when drilling miniatures or sculptures. It's made for a chuck that has a ¼ inch hex shank. Some may not fit entirely flush depending on the design of the…
Not my original design, this is a remix of a remix. I Simply added my own tweaks. Nice little model for storing my hex shank drill bits on my HSW. I used the test print located in the original authors files, I recommend people go there…
I'm an Electrician making inserts for my tools. I just got a 3d scanner and l'm learning how to use it. Any feedback will be greatly appreciated. This is a work in progress design. Router Bit fitment may very Based on your printer. It has…
I ran this through Tinkercad and scaled it to 101% to fit the fan shroud better, and enlarged the hole for the shank to around 9.5mm or 3/8" so it would fit my Clockwise digital indicator. Print Settings Printer: Creality Ender 3 Rafts:…
Shank for Pfaff machine with slight offset, about 2.2mm. Commissioned to make this to fit a specialized foot with hole offset too large for normal Pfaff shank. Thought someone else may find it useful in the future. Original shank files…
Adapts your 8-32 cleaning rods to a 1/8" Shank. Excellent at cleaning the chamber face of HK roller-locks (MP5/G3) when chucked up in a drill. Brushes found for cheap on Amazon (search for "1/8 shank end brush) or Harbor Freight .…
A figurine of red haired shanks from one piece.
Print this thing and you will no longer waste time locating a drill bit that got obscured under other tools at the bottom of your bag. I designed this thing to keep a set of 12 hex shank spade bits organized in a side pocket of my tool…
Printed it sideways with supports so that it's not weak against stresses perpendicular to drill bit axis. But that means it's more likely to break if the fit is tight with the whisk handle. Mine broke on insertion, so I just wrapped a…
Shanks - One Piece - Hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Generic Black Transmission Distance: 0.3 PLA Generic Red Transmission Distance: 4 PLA Generic Grey…
Uses the same base clip as my other Slatwall models. For standard 3" Slatwall but has only been tested with storeWall as that is what I personally have installed. I spent a lot of time trying to tweak the dimensions so that the parts…
This is a holder for T-shank jigsaw blades. It is suitable for blades with thickness from 1 mm to about 2 mm range. All the Bosch jigsaw blades I have fall into this range. I'm publishing this model ahead of Halloween. I hope this can…
This is made to hold standard hex-shank bits and mounted to the wall. It angles the bits out so you can stack these and save space and still be able to access the bits in each slot.
This collection of models provides hand guards and handles for tools like cold chisels, pin punches, center punches, etc that have hexagonal shanks in imperial dimensions. They are designed for printing with TPU and have no overhangs nor…
I'm an Electrician making inserts for my tools. I just got a 3d scanner and l'm learning how to use it. Any feedback will be greatly appreciated. This is a work in progress design. Router Bit fitment may very Based on your printer. It has…
There are two versions. The regular version has .45 tolerance for the vertical hex shafts because they are greatly affected by lack of tuning and/or lack of Linear Advance. The LA version has .2 tolerance for tuned machines running Linear…
Trays for imperial reduced-shank (also called Silver & Deming) drills, with flute sizes from just above 1/2" through 1". These nominally have 3" of shank and 3" of flute, but in reality the flutes can be up to about 3.25" and part of the…
Grasp your wee hands around this bad boi as you clean up those ruff and yucky edges and holes Category: Hand Tools
This part is made in two pieces that nest. Print each piece in vase mode (0.4mm nozzle, is what I used), then slide them easily together. And you can store up to six endmills, 1/4in. shank, neatly in one #gridfinity square. The trick is…
This is a handful of printable replacement flanges for draft beer faucets. The various models are: A1 - Modeled after the standard black plastic flange included with most faucets. B1 - Modeled after the larger stainless steel flange…
I think pretty much everybody who gets started in machining as a hobby buys one or more of these end mill sets when they get a milling machine. They're not usually the highest quality cutters, but they're a convenient way to have an…
Hello Made this in Tinkercad for anyone that has the same drills or want to use 6 favourite screws I bought mine here: https://amzn.to/3S4Nl02
Burr stand for up to #70 2.34 shanked burrs. Hole diameter is 3.5mm, depth around 10mm. Printed in PETG.
10x Worm 5x15mm, 2x screw 5x30mm, 2x srew 5x50mm, nuts M5x 20mm
Disk Chisel - Glencoe Style - 9 Shank - 1:16th Scale Uses M2 Screws. There are holes that need drilled out. Indicated with indents.
Iconic Movie Posters- The Shawshank Redemption - 1996
I wanted to use 4mm precision bits in my 1/4in shank tools. I have a metal adapter to do that but it sticks out past the tool allot. That is when I designed this low profile adapter. it only protrudes from the 1/4in tool by 2mm. This uses…
Use this to adapt your Slant-Shank Singer sewing machine to use a modern clip-on / snap-on presser foot. Printing Print with the flat side on the bed. Use ~10 wall loops. I'd recommend using PETG but PLA or ABS/ASA might work as well but…
Führungsvorrichtung für Kukko 330-008 Glanzvernickelter Schlagzahlen-Satz 8 mm Schrifthöhe 12mm Schaftbreite 58 - 61 HRC Härte 331-008 Glanzvernickelter Schlagbuchstaben-Satz 8 mm Schrifthöhe 12mm Schaftbreite 58 - 61 HRC Härte für einen…
Heart Button
I have a few drill burrs for cutting and grinding. I wanted a way to bring all my burrs to a single place and neatly make them accessible. An added complication is that the shank sizes are either 2.4mm, 3.0mm or 3.2mm (1/8in). My solution…
Adapter to use Pfaff low shank presser foot on Pfaff 138 Printed in PETG with 100% infill. Hole is tight but with some pressure original screw can be used. I tried the fit on my 138 and it was ok. Made some changes in second file: hole…
Disk Chisel - Style 1 - 11 Shank - 1:16th Scale Uses M2 Screws. There are holes that need drilled out. Indicated with indents.
Mounted Chisel Plow - 9 Shank 10ft - Style 1 - 1:16 Scale Uses M2 Screws and Two M2x100mm rods There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the…
Custom 3D printable sewing foot designed for Singer Heavy Duty machines. The main body is printed in Nylon or PETG for strength and wear resistance. The shank is a separate component made from a 1.5 mm diameter metal rod, providing…
For use with Harbor Freight's 13pc Warrior Hex Shank Drill Bits . This is a mount to hold the above drill bits. It utilizes the included holder that shows the size of the drill bits. I used 2 6x2mm magnets to hold the drill bit holder…
Printed in black, white and red. Made in onshape
This bar holds six router bits with ¼" shanks. The bar flexes so they can be removed and inserted more easily, but then clamps down for a solid hold so they never fall out.
Mounted Chisel Plow - 11 Shank 13ft - Style 2 - 1:16 Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to import as…
Holds General drill bits with hex shanks. Bought from Harbor Freight…
¡Trae a la vida a uno de los personajes más icónicos de One Piece! Este archivo STL de alta calidad presenta a Shanks, el legendario Emperador del Nuevo Mundo, en un impresionante diseño que captura cada detalle de su intimidante…
Mounted Chisel Plow - 13 Shank 14ft - Style 1 - 1:16 Scale Uses M2 Screws and Two M2x100mm rods There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the…
Führungsvorrichtung für Kukko 330-004 | Glanzvernickelter 9-teiliger Schlagzahlen-Satz DIN 1451, 4 mm Schrifthöhe, 58 - 61 HRC Härte 331-004 | Glanzvernickelter 27-teiliger Schlagbuchstaben-Satz DIN 1451, 4 mm Schrifthöhe, 58 - 61 HRC…
This model is best printed with 100% infill at a 45° angle with tree support, this should prevent layer delamination and small parts being lost into the instrument. However, I recommend testing the part for strength prior to use. I also…
Mounted Chisel Plow - 13 Shank 15ft - Style 2 - 1:16 Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to import as…
handle for 1/4 Hex Shank Magnetic Bit 105 Degree Bend Angle Extension from Ali : https://www.aliexpress.com/item/1005004670120155.html
This one is the drill chuck holder, with the hole resized for an R8 shank, this fits the 16mm chuck that comes with a Warco GH-18 mill. The holders interlock with other ones i have made. The screws i use to mount these to the wall are…
Mounted Chisel Plow - 9 Shank 11ft - Style 2 - 1:16 Scale Uses M2 Screw. There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the option to import as…
Mounted Chisel Plow - 9 Shank 10ft - Style 1 - 1:16 Scale Uses M2 Screws and Two M2x100mm rods There are holes that need to be drilled out. These spots are indicated with indents. Remember when loading into your slicer to select the…
hey guys this is the 3 point probe that i made what you need will be 3 x 3mm pins (i use used 3mm drill bit to make that) 3 x 3mm bearing balls, this is for over travel alarm sensor 3 x 6mm bearing balls, for the raw stock touch probe 1x…
This is a hex shank drill bit holder that can hold up to 2 sets of drill bits. It has labels for sizes and a built in drilling guide to keep the drill bit straight. Printed with 15% infill with polymaker filament. The gaps in the top are…
This is a follow on to the Gridfinity holder I made for my IR307B die grinder, to hold the bits. I've gone through several different versions of this before getting something I am relatively happy with. This could have been more compact…
Credit to and9699 and BentDerailleur for the original models. This bitholder houses a little set of hex adapter bit sold without a case. Box dimensions are a little bit different from the original of Bent Derailleur. Assembly instructions…
