Counting matching models…
This is my print and build of the Mondoshawan alien in the movie “The Fith Element”. Great fun to paint and a challenge with metallics. Great job by the creator and thanks for sharing. I have included the .lys file for those using Lychee.
Mondoshawan : The Fifth Element.
Can protect the probe body by triggering contact stylus, probe must be active and in protective mode to react. Won't help if you handwheel the Z at Mach speeds. Recommended Print Settings: Seams-Random Walls-4 Infill-Gyroid ≥35…
Mondoshawan temple key added fixekey.stl on Thursday Jan 28 at 4:40pm also added blender file for good measure.
Upgrades From Version 1 The Body Panels are seperated. The Roof is seperated. Seats and Light seperated Interference issues corrected. Other Minute structural changes. There are three ways to print this. As single piece :- Please download…
A fairly simple one and one a bit more stylized. Should be easy prints, here at 0.2mm layers in Polyterra peanut PLA. Just small supports under some overhangs in places will help. .step/.f3d files attached.
To view updated version of this model please click here. There are three ways to print this. As single piece:- Please download the STL but there wont be any movements. As nine or ten pieces :- Please download file ending with combined.3mf…
How to print it? 0,25 mm draft infill 15 % PLA 2 perimeters Supports - no Enjoy your protection ;-)
Renishaw ots shield to cover / block chips from damaging Renishaw OTS tool setter. Made a hinged lid style for moving the cover when needed. 80% infill with supports.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
My blade lock broke, and since I like to carry it in my back pocket, I wanted it replaced. A factory one cost about $18 before shipping, so I figured I would try to make one. It isn't perfect, but it fits and works. Orient the model with…
Movie Stills recreation of rickshaw droid from episode 3 of The Book of Boba Fett. Rickshaw will be added at a later date.
Partially enclosed shelf for a Shaw Fibre+ Gateway modem 2.0 (XB7). Also works for Comcast XFinity TG4482 / Arris. Printed with PETG, 20% infill, no supports needed. Suggest adding a cylinder modifier around the screw holes to strengthen…
meet Shain the sheep
Rickshaw Cart and Bot from Book of Boba Fett episode 3 Fixed with Makeprintable.
Top Gun - Lt. Nick Goose Bradshaw - 1986
Cover for Reinshaw OTS mount to table
This bracket allows you to wall mount a Shaw BlueCurve cable internet modem. (Technically the ARRIS Wireless Gateway TG4482) Generically: Technicolor | CommScope CGM4331SHW | TG4482. AKA: Fibre+ Gateway 2.0 (XB7) Mount to the wall with #6…
The Shawshank Redemption - The Escape - 1994 3D printable model.
Shawshank Redemption - 1992 3D printable model. Prints in 4 parts. The figure, the prison wall, the sign post, and the sign. Resize each to your needs and print!
This is a rough scan of the original Mondoshawan Ship from the 5th Element Movie. Requires supports. Stand included. Based on the real prop! Prints with supports shown below, but they come off very easy. Powered by Image-to-3D from…
After many revisions of a request, the SHAWNDERIZER is done A Combination of Shawn and the Tenderizer ; the Shawnderizer is a Battery Tray expansion for the HC Diana with a super pointy front end. Has also protected my barrel from copping…
This is a rough scan of the original Mondoshawan Head from the 5th Element Movie. Requires supports. Stand included. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d) Ship Here:…
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Rápida y buena calidad
This model is based on the mask Shawn Crahan wears during a Slipknot performance. He is one of the founders of Slipknot and plays percussion.
I initially tried to print Виталий Лукин design, and discovered that it doesn't quite fit my Shaw Litterbox(one of the multiple names with which you can find this Smart Litterbox on the market) as the tolerances on the section that fixes…
Reinshaw OTS Probe Cover designed for use with magnets. This has a flat top for ease of printing. No supports required. All my print and filament settings are in the .3mf file. *added a 2nd version with the cutout Nozzle 0.6 Wall count 3…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day September 19th. Front shows Oshawott and back shows the Oshawott evolution. Glue coin halves together after printing. Paint if desired.…
Renishaw OMP-40-2 Prob Halo made to use 8-32 set screw. Original version is low side profile and v2 is increased in diam
Fast and Furious Hobbs and Shaw Film / Cinema room sign, Colours can be altered to whatever you prefer through your AMS (Bambu) or through you current printers configuration. Large Measurements approx.: 22cm x 7.5cm x 2cm Medium…
Replacement piece for the plastic blade lock on the Kershaw Chive, Leek, and Scallion. Print with the thin blade lock piece horizontal for best results.
Iconic Movie Posters- The Shawshank Redemption - 1996
This item is used to hold shawls closed. Recommend you use supports when printing because of the rounded shapes (donut, cone).
Commemorate Clayton Kershaw's 3000th career strikeout with this desktop sign and stand!
These are custom Handles for the Kershaw Knive “Clash”. i printed it with Bambu PETG-CF which turned out to be absolute awesome. Infill 100% ABS/ASA/PETG Print with Logo on top Support yes ( One side has a cut out on the bottom)
https://makerworld.com/en/makerlab/makeMyVase
This ist a toilet paper Roll holder looking Like Shawn the sheep. It can hold Up to 7 Rolls with 100mm Diameter and depth. The assembly ist done with glue. The feet can also bei assembled by screws with respective threads to be inserted.…
Shawn Mendes Lithophane Lightbox Like most of my lightboxes it has a short top and tall bottom. This allows for less waist if you get those pesky whisp or random issue. I have also included 2 ways to load the files. STLs The STL's are…
George Bernard Shaw Buste Ce buste représente George Bernard Shaw, dramaturge, critique et essayiste irlandais, figure majeure de la littérature du XXe siècle. Inspiré de la photo la plus populaire du personnage, ce modèle capture avec…
This model is based on the most recent version of Shawn Crahan's mask that he would wear while performing with Slipknot. He is the percussionist for Slipknot.
I wanted something to house a CO2 sensor (hence the hole for a cable at the rear of the base) and thought a Dalek would be fun. I'm new to 3D printing and 3D modelling so I'm sure there's plenty that could be improved. I modelled at…
Kershaw Iridium pocket knife blank for filling in the unused pocket clip side. Press fit design. 0.10mm Layer Height 100% infill Pictured in PA-CF, but can be printed in any PLA of choice.
NOTE: If you like our designs, please consider supporting our work by joining our Patreon channel—your support helps us keep creating and growing our community! This is a set of pieces that can be used to recreate the Start Trek Picard…
A replacement for the non-locking aluminum or carbon scale on the Kershaw Pub knife. Should be printed standing on the long edge so layer lines are perpendicular to the clip flex direction. Functional printed in PLA+ but probably better…
hey guys this is the 3 point probe that i made what you need will be 3 x 3mm pins (i use used 3mm drill bit to make that) 3 x 3mm bearing balls, this is for over travel alarm sensor 3 x 6mm bearing balls, for the raw stock touch probe 1x…
UPDATE 2025-05-27: The initial dimensions were not correct for Box H, so that model was replaced with an updated version. Also, Box A-E was modified to provide better clearance between the game pieces and lid. That model was also…
An Indian Style Auto Rikshaw for u to travel in India!!! Fare: ₹20/Km ($0.22) So first u gotta attach the small wheel holders to both the slots in the rear section, then attach the handle, and then finally insert the tires inside :)
Size: 150x221mm Print at 100% infill with a layer height of 0.16mm with a base layer of 0.32mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA+ R3D Light…
It's Shawn Frost from Inazuma Eleven, and it was generated with the help of artificial intelligence. Es Shawn Frost de Inazuma Eleven, y fue generado con la ayuda de inteligencia artificial.
Made this lil guy to hold my tv remote to add to my **Coffee Table Honeycomb stand** fits my Shaw Smart Remote pretty well holds vertically, would work on wall or other stands, printed this for the side of my remixed model (check out my…
1x4 Gridfinity Holder for Kershaw Cryo Knife. Shadow box with an angle to store and retrieve. Category: Tool Holders & Boxes
1/8 inch holes ¼ inch chamfer spaced 1 inch apart
I wanted to use the Parametric Gridfinity Drawers by uka but wanted to cut down on the filament usage. These drawers only use ~62g of filament and are quite strong. I removed the printed on handle and added slots/mounts for the handle…
A simple 3x1 Gridfinity bin to house a Kershaw Grid pocket knife. I have removed the top lip for stacking due to clearan
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 136.13x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm…
This is a model of my interpretation of the fortress, Kredik Shaw, or Hill of a Thousand Spires. It is from the Mistborn series be Brandon Sanderson.
uses 4 3/8 x 1/8 round magnets glued in
A Kredik Shaw book nook from the Mistborn books. This is the same height and depth as the hard cover Mistborn books. It has a spot on top to put a 60mm LED puck like the Bambu Lamp Kit 001 uses. I designed this to print with no supports…
This model is based on the mask Shawn Crahan would wear while performing with Slipknot. This is one of the later versions of his mask.
This model is based on one of the versions Shawn Crahan would wear while performing with Slipknot. Details rely heavily on painting or an EXTREMELY long print with an ams.
oshawott model made for a class in school
Repair part for the LP2/LP2H sensor after an impact on the Z-axis
This is a generic E-rickshaw or bike motor from China. This is a DC Brushless Gear motor. Also known as a Bangla Boss motor or pan-pata motor in Bangladesh. This is an almost accurate model of the real motor. Key specs: Item: BLM-1200…
Simple support for our needs, might be useful to others.
jednoduchá krytka nástrojovej sondy renishaw
UPDATE 2025-05-27: The initial dimensions were not correct for Box H, so that model was replaced with an updated version. Also, Box A-E was modified to provide better clearance between the game pieces and lid. That model was also…
It's Shawn Frost from Inazuma Eleven, and it was generated with the help of artificial intelligence. Es Shawn Frost de Inazuma Eleven, y fue generado con la ayuda de inteligencia artificial.
An Indian Style Auto Rikshaw for u to travel in India!!! Fare: ₹20/Km ($0.22) So first u gotta attach the small wheel holders to both the slots in the rear section, then attach the handle, and then finally insert the tires inside :)
I designed this in FreeCAD and printed it in TPU with a .2mm layer height.
hey guys this is the 3 point probe that i made what you need will be 3 x 3mm pins (i use used 3mm drill bit to make that) 3 x 3mm bearing balls, this is for over travel alarm sensor 3 x 6mm bearing balls, for the raw stock touch probe 1x…
Renishaw OMP-40-2 Prob Halo made to use 8-32 set screw. Original version is low side profile and v2 is increased in diam
George Bernard Shaw Buste Ce buste représente George Bernard Shaw, dramaturge, critique et essayiste irlandais, figure majeure de la littérature du XXe siècle. Inspiré de la photo la plus populaire du personnage, ce modèle capture avec…
1/6 of total size taper with 1:33 and the rest of chanter with a 1:26 taper. Throat 4,7mm. Sound volume should be similar to a Borderpipes in A = 95-100 decibel. Should sound similar to this one:…
Kershaw Lightbox. My print is scaled down but you can scale as you wish. Standard the file fills a P1P buildplate
I recreated the "SHAW" Meme in 3D as a gift for my friends! Hope you enjoy it as well :) I printed it as it is in the 3mf file, so that all the surfaces showing were very detailed. Main body printed with supports!!! When you are done…
I couldn't find a cover model for the Renishaw TS27R probe anywhere, so I designed one. I think it will be useful for many people who use this probe. The print orientation is shown in the photo. It doesn't require supports, just a small…
I designed this in FreeCAD and printed it in TPU with a .2mm layer height.
Fast and Furious Series - Deckard Shaw (Jason Statham) - 2001-2023 3D printable model.
It was a quick project i did in my free time. I hope you like it and share your opinion
I bought a Kershaw Amplitude 2.5, but I found the pocket clip a bit aggressive. I ended up replacing the stock clip spacer with this on (which is .5 mm thicker), and now things are a little better. Printed at 100% infill, only takes about…
Some simple scales for a Kershaw Chill knife. Easy to print, easy to customize. I included both tip-up and tip-down versions of the left scale so you can carry however you like. There's also both a blank version of the right scale and one…
Updated Design as of 9/18/2024. Much easier to print and stronger. My Kershaw pocketknife has a blade stop that prevents it from opening in your pocket. This little part broke on me three times. Kershaw warranty takes over a week to send…
Second try on making 3D Pokémon. I hope to see your printing of this model if you liked it. If there's any problem with this model you can share with me.
