Counting matching models…
If you want to use Losi Mini-T springs on your Traxxas TRX4 shocks, these spring perches will allow you to make the conversion. The lower perch is designed to allow popping it off over the shock shaft without removing the rod end, so…
Got a returned/broken RC car from a bin store. This is an MJX 1:16 scale Hyper Go buggy. The shocks tower (connects front shocks to frame) was broken. I printed a crude one from a not-to-be-mentioned printable model website, but wanted to…
These are volumne spacers fiting for the Fox Float X (and other) shocks. It's fitting tight onto the shaft, but it's working ;-) I attached also the Fusion File so you can modify it for your needs. The both models are the copied 0.4in³…
If you want to use Losi Mini-T springs on your Traxxas big bore shocks, for example p/n 2660, these spring perches will allow you to make the conversion (commonly used on 1/10 scale rock crawlers). This spring perch is designed to allow…
This is for the 1/2" size DU Bushing for Fox and most other brands of rear shock Originally I ordered a new DU Bushing (rear shock eyelet bushing) and the bushing tool for my mountain bike. The bushing showed up; but the tool never…
Working on my latest RC build, I realized off-the-shelf suspension shocks were surprisingly affordable. To bridge that gap, I designed these 3D printable adapters for them. Required Products WPL C14 C24 Shock Absorber 4x M2.5x12mm Screws…
Here is a link to the shocks that this spring perch was designed to fit: https://www.amazon.com/gp/product/B08GLYH98X/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Update 11.03.2026 - fixed Right part of the chassis and the rear left arm - there were some incosistancies in between the left and right arms: Update to RUDE - 09.2025 I had some of the non-printed components available in my storage so…
RC Shock Building Stand for 13MM Off Road Shocks, based off The Hudy Shock stand and Remixed from: KayJayFE on Thingiverse however I Moved and lengthened the standoff legs as well as created recesses so they can just push in without need…
I could not remove ball joints from my shocks so I've remade @GetItPrint3d brackets. Also the rear one was not fitting great with the base, so I fixed that. This version also need heatset inserts for the screw. For this to work you will…
Ordered a new DU Bushing (Rear Shock Eyelet Bushing); plus a DU Bushing Tool for my for my mountain bike. The bushing showed up, but the tool never did...... So I decided to try a 3D printed one; which worked surprisingly well. Use a 4mm…
Replacement for Fox crush washer. Easy to lose when swapping shocks. Print PETG, 100% infill. 0.2mm layer height or less. Smaller nozzle is better to get the details, 0.4mm works fine. The reference picture is printed with 0.6 nozzle at…
Used these Shock towers to fit 90mm shocks to a Tamiya TL-01 chassis. Together with a reduction gearbox (I will upload this later) you can fit bigger wheels to get some kind of TL-01 crawler. There are also mounting points for Carson…
it was my nephew's favourite so I re-created it.
It goes on the rebound/compresion knobs and can be torned with a 8mm hex key
22nd iteration :) - You will need a strong but flexible material. I'm printing exclusively in Taulman 910 just for these and I have this tower mounted to 2 cars which have each taken some serious abuse. Designed to flex a great deal, but…
I tried to refill the shocks for my MJX Hyper Go 16208, but 70 wt silicone oil was still too thin for them. so i printed the shock pistons to be able to remake the holes or just control the dampening from the diameter of the piston. The…
aqui dejo un practico estuche donde podremos repasar nuestro amortiguadores y diferencial organizado con pequeña bandeja para no perde un tornillo por la mesa es practico y cierre con juego de imanes.. de Neodimio, Imán Pequeño Redondo 6…
Remix of https://www.printables.com/model/166887-volume-spacer-for-fox-float-shocks for my 2026 Fox Trunnion
I built a few Kyosho legendary series kit, and one step is always difficult. Last time, I did not thought about this, but it's always hard to put the shock gaskets in place, and sometimes you break one. This is my own attempt to solve the…
These are Spring Free No Supports K'nex Suspension/Shocks. Good for use in k'nex vehicles. there are 2 versions, one with more articulation and one with less articulation. Only takes 14 minutes to print!
Using Traxxas Big Bore shock with Losi mini t springs is a common mod to getting a good shock for crawling. Losi mini t springs are hard to find lately (at least where I live) but Desert Lizard springs are common but they do not fit as…
Quick print for an adjustment knob for Manitou Skareb Elite MTB Shocks (circa 2003). Mine broke after many years of service. If anyone else still uses these and also needs to replace the knob, this print may be of use. PETG is fine for my…
As the piston on my shock absorbers was broken and I didn't want to order online because of a component costing a few cents, I designed the piston. Printed in PLA, diameter 10.89mm. The installation is done simply by replacing the old…
My dad drives an old Blue Bird RV camper and wears Shocks bone conduction headphones while driving. But he needed a spot to store them when not wearing them and wanted it to attach to his phone. His design had his nickname and the Blue…
Created for shock testing for the MSU SAE BAJA Racing team Single slide-on model and two-piece clam shell model (two piece is more complete) for measuring the travel Model for String Potentiometer SP1-12…
These sleeves can be used to modify Bilstein rear shocks for a Volvo 760 (p/n: FA-B46-0296-H2 or 24-002967) to fit the VW pickup rear axle. Bilstein never made a specific shock for the rear of the VW pickup, but they do make some strut…
Lost one of my Spring retainers and couldn't find a fitting model online so designed my own
Print in TPU for bomb-proof usage. Use two zip-ties to secure to the stem. No supports needed.
Update 11.03.2026 - fixed Right part of the chassis and the rear left arm - there were some incosistancies in between the left and right arms: Update to RUDE - 09.2025 I had some of the non-printed components available in my storage so…
Working on my latest RC build, I realized off-the-shelf suspension shocks were surprisingly affordable. To bridge that gap, I designed these 3D printable adapters for them. Required Products WPL C14 C24 Shock Absorber 4x M2.5x12mm Screws…
Remix of https://www.printables.com/model/166887-volume-spacer-for-fox-float-shocks for my 2026 Fox Trunnion
LDRC Shock Preload Spacers - Fits WLToys Shocks I made these for my LDRC 1899 RC and fit like a glove. 5mm Diameter. Will also fit WLtoys K989 and K969 RC's. Print 100% infill, no supports required. Enjoy!
Just a little remix to give the Bebop a little shock absorption upon landing. There are right and left versions. Also should fit without removing the rubber plugs but I took them out anyway. UPDATE Made the legs a bit thicker as my first…
print in 0.15 100% full filled in pla abs or petg add 0.5mm shim and 20mm m3 hex screw for rear arm
These designs are lego suspension with higher articulation. each file has different connectors in different orientations.
This shock is designed to be fully 3d Printed. All pieces minus the two TPU Gaskets and spring are meant to be printed from PLA. The Spring is designed to be printed from PETG. This print does require a good and finely tuned 3D Printed as…
Little helper to remove the bushings from FOX rear shocks. Print Settings Printer: Ender 3V2 Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 35 Filament: RedLine PLA/PETG Category: Sport & Outdoors
Rear Shocks for Radioshack Golden Arrow, Sagitta I made these for my Radio Shack Sagitta, but I think they fit Golden Arrow and maybe other Nikko buggies. These are the rear shocks with the offset angle with the longer shock mounts on the…
Nikko F10 Rear Shock bodies. Fit Rhino, Bison, Super Lobo II, etc. If you are missing springs, they are about 60mm Long 14 mm ID 16mm OD. You can find replacement springs this size. Look for other 1/10 shocks. Tamiya Blitzer Beetle rear…
stand to hold all your tools and shocks that are being built or have to be built
If you found my things useful, you can buy me a cup of coffee: http://paypal.me/marcuss24 Update - 15.05.2020 Added smaller version of front and rear shock towers for 100mm oil shocks. The original Shock Towers are for 110mm oil shocks.…
While FPV driving, I randomly run into things. So I thought designing a bumper might be a good idea… Printing Bumper & shocks saver: PETG. Use modifier object for more infill where needed to increase strength. Bumper front part: TPU for…
bike fender mount for jetson bolt pro using mtb shocks
Just a little remix to give the Bebop a little shock absorption upon landing. There are right and left versions. Also should fit without removing the rubber plugs but I took them out anyway. UPDATE Made the legs a bit thicker as my first…
Shocks upgrade, or replacement PISTON for oil filled rc car shocks. V1: csa 7mm x 2mm, shaft hole 2mm, went holes 1.5mm x4 V2: csa 7mm x 2.5mm, shaft hole 3mm, went holes 1mm x4
