Counting matching models…
A vase & planter set with a scaly motif reminiscent of fish scales , this model was build to explore how we could implement some relatively deep pattern into Vase Mode print. Printing Both model should be printed using the following…
My make of the Spider robot(quad robot, quadruped)-SG90 by regishsu using an arduino nano and servo shield with 2x 18650 batteries.
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
Table saw pushstick, quickly drawn to fit my Prusa MK3 print bed. Original design found here Print instructions Category: Hand Tools Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: .6mm Nozzle, .4mm…
I proved the need for a push stick by taking a slice out of the one that came with the saw (see last picture). This left the original push stick with reduced contact area with the timber and a sharp point on the end. As this is a solid…
SHS delayer chip 3 walls, 100% infill, printed in 3Dlac pla+
Tappet Plate v2 SHS copy Print 0,2 layer 6 walls 30% infill organic tree support 25°
I faced some problems with the overhangs printing the 100% scaled washstand in PETG, so I remixed it and I printed it (without supports). Print was done with a 0,6mm nozzle. Thanks to SubSite for this very nice design for the Dollhouse…
Handy solution for outdoor camping or garden. It will leak until negative pressure builds up inside the bottle or you add a rubber ring.
This is my design of Master Spool with perfect mesh. Print instructions Category: 3D Printer Accessories Summary This is my design of Master Spool with perfect mesh. Print Settings Printer Brand: Anet Printer: A6 Rafts: Doesn't Matter…
Improved cashplate for the LOCKCARD Wallet. Between the original sliders S and M in Size. With additional dividers to keep your coins from moving, while still having enough space for your banknotes.
OpenSCAD - new Version - see below... I was seraching for a simple handing spool holder for mounting in my Ikea Ivar shelf system. Didn't find one - did my own! If you are familiar with openSCAD it's customizable in height and width of…
I remade this part in Fusion 360 so that it'll print in a single piece, no gluing required. Remix of https://www.thingiverse.com/thing:2776257
Me: Can I get a sweetheart storm? Mom: We have a sweetheart storm at home. The sweetheart storm at home: All jokes aside, the MPP is an excellent blaster and this shroud aims to improve it futher. Features 28 mlok slots and includes…
Dashscreen Case for the Moza R12 Base. Will fit the R9 as well, but not on the R5. If needed i could make the adjustments or you do it on your own. The case can be secured to the base with two screws and the back of the case should pop in…
Pipes for small fishes alnd shrimps 7.5cmx5.5cmx5.5cm
A mechanical keyboard case imitating the appearance of an IBM Kishsaver keyboard. Features a 5 degree typing angle and tofu68 style layout. This model requires you to print tall for the case - make sure your Z-steps are calibrated…
FISHSTICK SPRITE FROM DANIBOB!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I use this helpful "Thing" when my camera is mounted on a tripod and remotely controlled via WiFi. It protects the camera from sunlight (heat), bird droppings and unexpected drops of rain. You can use any kind of thin plastic or cardboard…
My wife asked for a stand to hold the dish soap upside down so that she didn't have to break her arm trying to get a nearly empty bottle to expel its contents, so I delivered. This was designed for a 21.6 oz bottle of Dawn liquid dish…
Small but practical brush stand. A really fast and simple print that is really useful. I hope you like it! (Model of the photo is printed on the original Prusa Mk3 in Fillamentum Vertigo Starlight) Print instructions Prints without…
This is a simple case for https://github.com/notownblues/SHS-Z2M-Presence. It uses small screws to fit together (use a small drill if the holes are too small) I used 3m command strips to stick it to a wall but one can also use an…
Because the tray is a perfect fit for this specific sink, i added all the files and also a version without a spongeragholder so anyone can modify the tray to their needs.
Standard ID Badge Holder. We're Sharon High School, so I naturally engraved it with SHS. Yes, that is the Star Wars Font. If your printer is any good at bridging you should have little problem printing it. ID slides in from the top and…
The stock fan is terrible! Replace it with a bigger one without irreversible modifications! Mounts with original screws. Tested with a Noctua NF-A9x14 fan. The feet are 1mm shorter than required to facilitate use of a non-slip/rubber/etc…
Icescraper with a brushsytyle handle Version 1 comes with a flat blade for little to medium iced surfaces Version 2 comes with a reinforced blade for heavier iced surfaces Testprint printed with 2 walls / 15% honeycomb Infill / 4 bottom -…
The wall thickness of the model is 0.8, but it's meant to be printed in vase mode, with bottom 10 layers as solid
Basic dummy 13 figure but its Fishstick from Fortnite
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A detailed 3D model inspired by Fishstick from Fortnite…
Driptray and brushstand for multiple Oral B electrical brushes. Designed based on Oral B Genius 10100S. Infill: 8% Walls: 3 No support is needed. Happy printing!
This is an end cap for steel hollow section tubing (SHS) 100mm x 50mm
Mit dem Einhell-Adapter kann das Bodensaugrohr eines Einhell Handstaubsaugers mit dem Parkside SHSA 20-Li verbunden werden. Der Rohr-Adapter hat an der Einsteckseite einen Durchmesser von 32mm und verjüngt sich nach 50mm Einstecktiefe auf…
this universal adaptor takes any 38mm SHS (Square Hollow Section) piece of steel and mounts it to a flat surface without the need for welding only screws
The dish soap holder features a honeycomb or hexagonal pattern. It is designed to be mounted using double-sided tape. The holder is intended to accommodate a bottle of dish soap and a sponge. Its design allows for drainage and air…
Daughter's dog-washing trailer has a weird piece of 40x40 SHS steel sticking out both sides for no apparent reason - other than to damage people's shins who walk by a bit too close… After banging my shin on the end of the steel a few…
Bashsea Bio-Fuge Sump Weir for refugium or sump frag setup
My first real CAD-Project. Just a simple holder for my dishsoap that I threw together, so it doesnt have to lean against the tiles. Might need modification to fit your own sink. Printed with JAYO SILK PLA silver a little bit of support.
Holder for 4 electric toothbrushs Oral-B and 2 toothpastes. Support pour 4 brosses à dents électriques de marque Oral-B et 2 dentifrices
Replacement brush retention latch for Silvercrest SHSS 16 A1 vacuum clearer. Both parts need to be printed with supports. Works well when printed with 0.2 layer height. Category: Replacement Parts
so prints in three pieces, freecad was being insanely uncooperative so this was a ridiculous struggle the cap i gently heated to get it to form fit the groove little better as if not its very very very snug and you'll get it on and not…
Shakopee high school grinding wheel part. Archival copy Category: Parts
Holder for 2 electric toothbrushs Oral-B and a toothpaste Support pour 2 brosses à dents électriques de marque Oral-B et une case pour un dentifrice.
I used m16 Galvanized Nut with a tight press fit I have not checked if other nuts will have the same fit so I will include the .step files if you wish to modify the fit. If you are not confident in cad I can modify the design to…
( Please suggest in comment a better title, summary and description , had hard time to explain it. I will update this product infos with your suggestions.) On the picture I finger point the 3D Model. details: Suitable for various…
This is a remix of a Philips Hue motion sensor holder designed for mounting underneath a bathroom sink, such as an IKEA washbasin or any other hanging sink. It allows you to hide the Hue motion sensor in a clean and invisible way while…
A wall mount I made for the FoodSaver FSFRSH0051 [https://www.amazon.com/FoodSaver-FSFRSH0051-000-FreshSaver-Handheld-Sealing/dp/B002FWIVCA]. It mounts using WallDog phillip screws [https://www.amazon.com/gp/product/B003VNCCZE/] or…
I stood on and snapped the brush holder on my Beta Project Brushstick bouldering brush, I drew this up as a direct replacement and the only difference is its much better at holding straight handle brushes. I printed with PLA 80% infill…
Bashsea Bio-Fuge 24" Sump frag Light Guard hanger, useed to block light from entering first chamber when you run a frag chamber or refugium in the center chamber. Pairs well with my other model Bashsea weir. Parts Stainless Steel Screws…
I needed a way to wash my resin prints, but washing machines are very expensive, so I bought a "small washing machine" and printed these parts to give the exact volume of an Elegoo Saturn 4 Ultra. I don't know if the seller is reputable,…
Driptray and brushstand for multiple Oral B electrical brushes. Designed based on Oral B Genius 10100S. Infill: 8% Walls: 3 No support is needed. Happy printing!
This is a simple case for https://github.com/notownblues/SHS-Z2M-Presence. It uses small screws to fit together (use a small drill if the holes are too small) I used 3m command strips to stick it to a wall but one can also use an…
The wall thickness of the model is 0.8, but it's meant to be printed in vase mode, with bottom 10 layers as solid
I stood on and snapped the brush holder on my Beta Project Brushstick bouldering brush, I drew this up as a direct replacement and the only difference is its much better at holding straight handle brushes. I printed with PLA 80% infill…
Ideal for vacuuming crumbs from smooth surfaces It has been proven to print from ABS (it is more flexible than PLA) Print the tube lengthwise so that the filaments are stressed to bend. I print everything only through the wall without…
These jellyfish are really cool ! When you print them, of course without supports, they are already nice, but when you remove them from the print bed, wow! We can see their tentacles ! You have the boy and the girl, so no jealousy ^^ If…
This set is in 6 pieces for easier printing. The link that connects the bar to the individial keys is more than double the thickness the OEM part, which should make it more robust. It is possible to splice in a printed key to the OEM set…
RAMA | Dishsoap and sponge holder for kitchen rail This is the dishsoap and sponge holder , part of the RAMA collection of kitchen rail accessories. You can fit 2 soap or dishsoap dispensers with a diameter up to Ø90mm. The sponge can…
This is the character shown in the CrashSune tutorial on how to make a low-poly character in Blender.
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
Just my first attempt to make a useful 3d model in Blender and export it to .STL
There are a lot of soap dish designs out there and I figured the world can use another. Two sizes are included small and medium. I use them at every sink and shower in the house.
