Search results: shy

Shy Guy Key tag / bag tag

A very quick print to make a Shy Guy key chain or zipper tag. Attached Gcode is what I used to create the example print.

Squishy Fidget D20

This fidget d20 is squishy and satisfying, perfect for your desk or backpack! Note: This die has a tendency to not remain perfectly round, and as such isn't very good for actual TTRPG play. Better stick to your solid dice for that!…

Super Screw Scrubber: A Sensational Solution for Sparkling Screws (Brushy Edition)

Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove…

Squishy Turtle by jakejake

Squishy Turtle by jakejake This is not my design, but I could not find it on printables.com and the original creator seems to be not active anymore so I wanted to share it with everyone! Here is the original on thingiversere.com .…

Fishy Fishy Fishy Fish

Fishy Fishy Fishy Fish. Where is the little Fishy?

Meshy Cup

Dimensions Standart Dimension: 95 mm x 101 mm (D x H) Scalable to whatever size you need.

Meshy.ai Test. Classical Statue.

Playing with Paid version of MeshyAI HighPoly Mesh Output + post Texturing. Verdict. Slightly better mesh but messy texturing (seams are not clean). Displacement seems to be less predictable. Probably just need to play with it a bit more.…

Squishy Dumpling

Squishy Dumpling – Bouncing Keychain Meet the Squishy Dumpling , a cute interactive keychain that jumps up and down when you press it! The model consists of only two printed parts : the dumpling and the mechanical base. The flexible…

Shy otter

Check out my page for more emotional animals! 🐾💖

Flexible Squishy Fidget Loop

Use arachne wall generator + smooth vase mode! A flexible squishy fidget loop designed to be squeezed, stretched, shaken, bent, and manipulated by hand. The model prints in vase mode with a single-wall structure, making it lightweight,…

Squishy Fidget Stress Balls

FDM Print Settings: Printable with zero supports If required, only outer surface supports are needed (no internal supports) Resin/SLA/DLP Print Settings: When printed with flexible resin, it's recommended to use supports so the ball can…

Squishy fidget toy

A fidgit toy that is squishy and print in place

Betty the Bear | Fun squishy TPU gummy bear toy!

Recommended to print in translucent filament for gummy bear candy style. Print in TPU95A (or softer) to make a squishy gummy feel! Squeakify it! 3mf files to make a TPU squeaky toy using The Squeakquel! – learn more:…

Shy Guy Halloween mask

My son wanted to be a Shy Guy for Halloween this year, so I whipped up this mask for him. The lenses can be quite delicate so take care while removing the support material. I had good results using organic supports with the lenses rotated…

Nee Doh Classic Squishy Cube - Tpu

A highly realistic 3D printable recreation of the classic NeeDoh cube squishy. Designed to mimic the soft, rounded feel of the original stress toy when printed in TPU. The model features smooth filleted edges and an embossed center logo…

Snappy Squishy Fidget Ball

Other fidget models have a greater resistance, because they have more points of contact or are stuck together closely This one does not I have printed this design in PETG and PLA and either provides the same expeirence

Starlink Rectangular Dishy Flat Mount Bezel

Recommend printing in ASA for heat and UV protection. Super glued most of the bezel pieces on and filled the gaps between the pieces with super glue as well. I used Sikaflex on the piece that has the cable coming through it. This is both…

My Little Pony FlutterShy

Fluttershy from TV Serial My Little Pony Print instructions Printed from Prusaments PLA 4 perimeters infill 15% brim 7mm supports distance 3mm

Squishy Overhang Test

Overhang test Print instructions Gcode file here is modified to print with a bit of the bottom chopped off so no supports are needed.

Squishy Ball Cat toy (TPU-preffered)

I made this because health class got boring. Nuff said. Just kidding……. kinda This is a fidget I made to be easily printable, low material, and a fun time for your cat. ] Print at low infill out of TPU or PLA. I recommend less than 5…

Squishy the Little Octopus

Here is a small cute octopus. I designed it with solidworks based off a stuffed animal I have (named Squishy). The 3d printed octopus is not actually squishy unless you print it out of some sort of squishy filament. Print Settings…

Fishy Plant Pot

Here's a cute little fishy plant pot for smaller plants like succulents. Scale de model if needed. No supports should be needed.

Squishy Mushrooms (2 Sizes)

These Squishy Mushrooms came to life while I was designing my Fidget Garden. After some brief research and consulting with my family, it was decided mushrooms were not a traditional garden vegetable so they were voted out of the planter…

Starlink Rectangular Dishy Flat Mount

This is a remix of @chadfawcett_690675 original design. Updated the dimensions for a snug fit. Increased the height to 5mm taller to clear the cable from rubbing on the PCB as well as the acrylic sheet from rubbing on the PCB connector.…

Walking Fluttershy

Based on the drawing https://www.deviantart.com/bugplayer/art/Fluttery-Walk-610501022 Print instructions The wings are separate pieces and have to be glued on. The tolerance for the interfaces is 0.15 mm. There is also a separate version…

Squishy Bambu Lab AMS Lite Spool Adapter (e.g. for Sunlu)

You can find serveral Bambu Lab AMS lite spool adapters for spools with a larger inner diamenter. Most of them need lots of filament and take a long time to print. I wanted to have something simpler that does not need half a spool of…

Fishy Bike - Bicycle Fishing Mount

Hardware needed: 2x ¾ steel suspension clamps (or whatever size suits your bike) https://www.lowes.com/pd/Hillman-2-Pack-Steel-Suspension-Clamp/3013244 2x 10-24 x 2" machine screws and nuts 2 #10 Flat Washers 2x #10 Lock Washers To…

Shy girl sculpture

Shy girl sculpture

Squishy TPU Fidget Toy

A flexible and squishy TPU fidget toy! This fidget circle is bound to keep you busy while you are bored at your desk. This easy print in place fidget should print fine under normal tpu print settings

Squishy Dumpling basket

Hollow basket with connecting ring (can be glued) You need to scale dumpling to 90.15 x 90.15 x 38 for it to fit inside

Hinged Card Box--Button Shy, MTG

Edit 1/30/25: slight change to make box rectangular, and full multicolor version for Sprawlopolis and Tussie Mussie available here. This is a small hinged card box I made specifically as a hard, protective travel case for my Button Shy…

bowser , shy guy and yoshi from mario kart

It doesn't have supports. More characters are coming. it also can be used for mario kart monopoly because there are some characters that you have to buy. This is one of my first creations so it can have mistakes. anyone can do remixes and…

Niceberg TPU squishy!

Niceberg TPU squishy. If you like this model give it a heart! (If printed in TPU it will actually squish!) Designed to be like the real thing when printed in flexi fillement! Based on the popular squishy toys Needohs!

NeeDoh Squishy Cube

NeeDoh Squishy Cube

Just a cute Nativity Scene, nothing fishy going on!

Have yourself a merry little Grinchmas ;) Try to hide this cute little piece of decor within your (or your wife's) ordinary Christmas decorations and watch how long it stays unnoticed. For best results print the model "face down" on a…

Starlink Dishy v2 Winegard (1.5inch) bushing adapter

There's a lot of plastic at the bottom to give you the ability to put a bolt/screw through the bushing to hold it in the J Mount rotation wise. The top lip is slightly asymmetric to make it substantially easier to remove from the J mount…

Dumpling squishy!

Dumpling squishy! (If you print in TPU it will actually squish!) There is an openable and a not openable case. You can print for your friends and put it in a case to surprise them with what color they get. Print in glitter filament and it…

Starlink Dishy V4 Pole Mount

Settings: Material: Polymaker ASA Nozzle Size: 0.6mm Layer Height: 0.4mm Infill: 100% Requires: 1x Long hex bolt 1x Nylock nut 2x Fender washers

StarLink gen3 Dishy RV Bracket

We recently added StarLink to our RV. This is a set of models for mounting the gen3 “standard” flat panel to the back of a storage bay door. The bracket is printed in 4 parts which fit together. The “Right Upper” piece has an “Arrow”…

Ender 5 S1 - CR-Touch - Zero Y Offset Mod - Stronger, Longer, Less Meshy

~~Great original model - but I found: It was quite easy to break. It was slightly shorter than I'd like - it was almost level with the probe when deployed which caused my bed to crash into the nozzle. The 3d mesh was a bit borked - it had…

Squishy Gyroid Pad

Remove all walls, top and bottom layers, and infill density, switch the infill to gyroid, or whatever you like, and print with TPU for a super squishy and satisfying pad! Print settings: Wall line count: 0 Top layers: 0 Top layers: 0 (You…

Shyguy Mask

Basic ShyGuy mask. Optional anchor points for attaching a string or elastic. May need a dab of glue to hold them in place. Also added a split version for less supports and smaller print beds.

Fishy Bowl

Nicht viel zusagen, viel spass beim Drucken.

Starlink Dishy V2 Housing for Flat Mount

Update: I also included the Fusion 360 file so you can make adjustments. However, I did not translate it, so it's in German ;-) This is a 1-part or 4-part housing for a Starlink standard rectangular dish. It can used as a flatmount (dish…

3D Printed Case for the Starlink Dishy DC Power Supply and PoE Injector

This is a remix of the Starlink Dishy DC Power Supply PoE Injector enclosure posted by Everlanders at https://www.thingiverse.com/thing:5893999 The video showing Everlanders design and printing can be seen here:…

meshy bowl next generation

Dimensions: 200 mm x 52 mm (diameter x height) Easily scalable to any size you require

Dream Drop TPU squishy!!!!!

Dream drop TPU squishy! Sadly, the 2 parts do not come apart. If you print in TPU it will actually squish! If you like this model give it a heart! Based on the popular squishy toys, Needohs!

Fishy Organizer

Fishy Organizer is a stylish desk holder shaped like a fish – perfect for organizing pens, pencils, rulers, or any small items. Its minimalist and fun design makes it both a practical organizer and a cool decorative piece. 👉 Great for:…

RV / Boat - Dishy Mount - Starlink

This is a design made by Donald Scott (Facebook Starling Forum) Made to fit Rails with 22-32mm diameters. Rotates completely to accommodate horizontal, vertical, or any angle rails. Ethernet cable can be ported on the inside railing that…

Shy Guy Bobble

My friend loves shy guy from Mario Bros, so I made him a bobble head! It's a pretty good size and will take around 8+/- hours to print everything. It printed with little flaws and works pretty well. I made some adjustments to the…

Squishy Fidget Toy - Relaxing And Fun Fidget Toy

For this model you need to print 4 of every size oval. Start with the biggest 4 pieces and put them in the center two slots. Repeat this for the rest of the pieces.

Harbor Freight 20ft Flag Pole Starlink Dishy Mount

I needed a Starlink square Dishy mount for the Harbor Freight 20ft telescopic flag pole on my RV. All the existing models I tried didn't fit snug or didn't lock-in the Starlink, so I decided to model my own. This model fits snug on both…

Flushy Bottle Opener

My mom requested a bottle opener to save her hands and it's been far too long since I lovingly trolled her, so I'm delighted to introduce The Flushy Bottle Opener. It's an effective way to reduce hand strain, an amusing gag gift, and it…

Fortnite fishy sprite

the fishy sprite

SHY GIANT

Is it possible to capture a table character in an unpleasant situation? I think so. This is a shy giant. I found him bathing in a mountain lake. Even giants sometimes have to wash. Print instructions A sample print was made on my Anycubic…

Ditto Squishy Mold

Use these files to cast your very own Ditto toy! I've used a super soft silicone ( Smooth-on ecoflex 0020 ) to craft mine, though there's no reason other silicones or materials couldn't work. It was mainly designed to work with (m)SLA…

Starlink Dishy Cord Plug Cover

I liked the cover for the router end that I found here https://www.printables.com/model/322857-starlink-ethernet-adapter so I decided to make one for the dish end of the cable to go with it.

Mario inspired, Shy Guy, Tabletop DnD miniature

IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Mario inspired, Shy Guy, Tabletop DnD miniature 25 mm Medium base which can be used for DnD and other Tabletops.

Kirby Squishy Mold

A support free printable model. I remixed this because I saw another influencer showing a similar silicone mold, but not free. I grabbed this one and created a mold box for it. Hope you can enjoy. I printed this on a Prusa MK3 with…

Freddy Fazbear plushy (Secret Compartment)

Please post makes! I love feedback and try to do my best to use it to improve later models

ShyGal Artplate

2d artplate of a genderbent shyguy from Mario Height color map: 0-0.5mm = Skin 0.5-1.0mm = Coat Color 1.0-1.5mm = Brown 1.5-2.0mm = Yellow/Gold 2.0-2.5mm = White 2.5-3.0mm = Hair Color 3.0-3.5mm = Black Print Suggestions: I recommend…

Starlink dishy mount for a 25 mm reeling

You can mount you starlink dishy on a reeling. You just need 4 M5 x 16 screws with nuts. You may attach an additional safety wire to your dishy, just in case :-) I printed it on a MK3s with PETG 0.15 layer height and 25%.

Leshy Bust

Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

Squishy Manatee Keychain

Dive into the charm of the ocean with the "Squishy Manatee Keychain" – a delightful, easy-to-print accessory that brings the gentle spirit of the sea to your pocket. Known for their gentle nature and often referred to as "sea cows" due to…

Starlink Dishy Straight Foot Adapter

A small adapter to get a flat surface for washers/nuts/bolts on the included dish stand.

Squishy Animal House

A basic house for little squishy animal toys. Each of the fifteen cubbies are 35mm square and 42mm deep. Some attic space provides room for longer squishies or accessories. This could also be used as a display shelf for small items. I…

Shy Beauty – Sexy Topless Nude

Fishy paper clips

100% infill 1000% fishiness

Lethal ape sandman\ashy monster. [NEEDS SUPPORTS].

Im sorry that thar is not a helmet.

Leshy

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…

Death Star Egg Cup (AI -Meshy Experiment)

Death Star Egg Cup - Testing out Meshy web site for generating 3d models for use with Blender displacement. Evaluation: LumaAI is better. Meshy offers more refinement and prompt options than LumaAI. But its going to cost you after your…

Salted Butter Squishy Clicker V2

This V2 is much better than the V1, it even has wrapping now! This is a life size version as well.

shy guy mask

banananananananananananananana

Squishy Fidget D12

I recommend to assembly the top and bottom first and then connect the two parts. In the stringing guide you can see two guides at the top and at the bottom and in the middle is how to connect the two to one. NOTE: if you think the…

Pumpkin Leshy

A commission by a very cool dude! He has allowed me to upload and share the model of his Evil Pumpkin Leshy character with you all, so please enjoy! This model has been designed with easy printing in mind, few supports should be needed…

RC Boat Damen Pushy Cat 1004

This is a rc model boat of a Damen pushy cat 1004. Scale is 1/20. https://products.damen.com/en/ranges/pushy-cat/pushy-cat-1004 I will not finish this project. In the DWG and STEP file you will find all the different parts. The hull is…

squishy dumpling

squishy dumpling - includes 2 different lids

Lego Compatible (21269.dat) Minifig Hair Swept Back with Widow's Peak Chin-Length and Bushy in Back

This model is compatible with the lego system.

Starlink Dishy V2 (Gen 2) (Dishy McFlatFace) Post Mount

I was looking for a way to have my Starlink Dish mounted on a fence post at my property and could not find anything suitable so I created my V1 Dishy Fence Post Mount for the Gen 1 version. NOW, thanks to the unwanted attention of some…

Salted Butter Squishy (TPU Compatible)

It can be used with TPU to squish. Experience the ultimate fidget fun with the Salted Butter Squishy , designed by Super Awesome Goalie. Perfectly crafted for TPU printing , this playful toy mimics a stick of salted butter, giving you a…

Button Shy Game Organizer

Store your Button Shy wallet games in style with this organizer

Cool cat TPU squishy!

Cool cat TPU squishy ! If you like this model, give it a heart! Based on the popular squishy toys, Needohs!!!

TPU Squishy Slime

this is a slime that i printed in tpu 95. tpu 95 is not as soft and squishy as i would like it. i bet it would be better with tpu 85. i designed this profile to print slow. print this at .12 layer height. i have tried printing this at .2…

Starlink Dishy Gen2 Flat Mount

Starlink Dishy flat mount with provisions for the Boondocker PSU, Raspberry Pi 4 as a wifi router, and a DC converter. Printable on a ~200x200 bed. 12dc powers the unit. Various instructions on the interweb on each of these items. What is…

Squishy Bunny

A chubby little bunny sculpted by me, referenced from my daughter's squishy toy. Two files - one for the bunny and one for separate eye domes. I'm working on a one-piece version. Eye domes need a tiny dot of super glue Print size 100% is…

Medieval soldier running (Made with Meshy.ai)

soldier running with a shield and a sword. (I did not modify) print on a resin printer for best results

ShyGuy Multi Part Model/Toy/Bobblehead

All parts are separated and can be printed flat. The body is all that needs supports for his arms, use blockers on the waist. I stiffened the spine to very hard ( not included ) and oversized the shoes for this one. I also shortened the…

Tiny Squishy Fidget Ball

A tiny fidget to keep your hands busy!

butter squishy

for it to be squishy it needs to be made out of tpu filament.

StarLink gen3 RV Dishy Ladder Mount

This project consists of two brackets and an adapter. It uses the StarLink Pipe Adapter and this telescopic extension pole that I got from Amazon. The brackets are designed to fit around a ladder with 1" vertical tubes. It's a very tight…

Desktop Dishy: Small Scale Starlink Model (Work in Progress)

*This is still a work in progress but I wanted to upload what I have so far .* After installing my Dishy McFlatface at my house, I thought it would be fun to have a small scale version for my desk at work. It's roughly 2" by 3.5". The…

Tushy Bidet Knob Replacement

Anyone who has a Tushy Bidet knows that the knob is hard to twist. This is a better version.

Shyguy MMU print REMIX

I painted the Shy guy print of Peter Farell. have not printed this yet, purge volumes are questionable

Squishy Cute Robot Baymax from Big Hero Six

Squishy cute robot like Baymax from Big Hero Six May require supports

"Shy Ben" Peek-a-Boo Planter - Cute Desk Decor

🙈 Meet "Shy Ben" – Your New Favorite Desk Buddy! ✨ Bring a touch of emotion to your plants with this "See No Evil" inspired character pot. Designed to be both adorable and functional, it’s the perfect home for your favorite succulents! If…

lethal ape redux monster sandman/ashy

horror

VG80 MARSHYDRO Light Bar Support for Hydroponic Tower Garden

This bracket is used to mount VG80 light bars to the Modular Hydroponic Tower Garden. Use the metal bracket included with the VG80 light bar and mount it to the support using an M3 bolt and nut. Then the light bar will clip into the…

Starlink Dishy Gen3, riser feet

Riser feet for the new Starlink Dishy gen3, keeps the dish from actually being on the ground

Jawa Shy Guy, Multipart

Design is to be printed out in separate parts in the corresponding colors to eliminate the need to paint. This also allows everyone to be able to print this design regardless of what printer you are using. Combining a Jawa and Shy Guy…

Leshy's Crown

A little 3d reproduction of Leshy's crown from Cult of the Lamb I remix the model from @ShinpiMakes_277232 I might do the other one