Counting matching models…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic baseplates using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so you…
🎥 Watch the video tutorial In the video, I explain: -How bridge flow and speed affect the print. -Why more flow gives smoother results. -How to tune these settings in OrcaSlicer . -How to combine this with Tree Supports → “Critical…
This was a well designed model but I didn't like that it was too tall to use with the stock cover. While I was shortening it I saw room for some improvements so I made the following changes: Reduced overall height just enough to fit the…
Edit V3: Logo rotated 180° and tiny gap in bottom left and right has been fixed! I didn't want to have to keep buying the correct size sachets from BL as they're expensive and don't last long at all. There's lots of similar versions to…
README It has come to my attention that there may be a different model of AMS that this 3D model does not fit. Please check if the tabs are the larger or smaller ones before printing. Thanks Not my design but I found a another user who…
UPDATES: 12/2021 "A" parts for small servo "B" parts for big servo 03/2024 Improvements on the following parts: Body L and R, Case Holders, Gear 1 and Rear Frame R. 05/2024 improved design, ready to print plates, new parts and updated…
All printable parts for your Basic Board + PSU Add-on. Basic Board + PSU Add-on is needed only if you have Advanced Filtration System or/and White LED Strip Add-ons You have the option to print two different holders for two different…
Cylinder r = 100 mm h= 100 mm Can be used as skirt with 0% infill, 0% top and bottom layers and 1 perimeter.
I designed this silica gel container mostly for two reasons: I looked at several different silica gel containers and even printed a few but always found something I was not entirely happy with (I most likely didn't look at every single…
Basic Toolbox – Creality Ender 3 V3 SE This toolbox has been adapted for the basic tools that come with the Creality Ender 3 V3 SE 3D printer model
To print this, use Vase Mode (Spiral) Change line widths from 0.4 to 0.7, increase by 0.3mm to each width setting Use 6 bottoms, this makes sure that the vase has a good connection to the top or bottom. Use ASA/ABS or PETG if you want…
This is a remixed version of Abby575 's amazing design. This remix simply changes the designs of the cutouts in some of the panels as well as reduces the radius on the corners of the pieces to reduce gaps at the joints of multiple panels.…
FAST PRINT - Single Wall Basket Weave - NO SUPPORTS The Problem: All baskets and lids with grid-like perforations result in long print times If you've printed such a basket you'll notice that the printer spends the majority of its time…
Combined the ams desiccant tray and the Dry Pod with hydrometer models into a single print. A day after setting this up with fresh desiccant beads ( https://www.amazon.com/dp/B013L31PQ0?psc=1&ref=ppx_yo2ov_dt_b_product_details ) the…
This model is compatible with the lego system.
This is a remix of SoftFever's middle dry box AND SamH's remix for AMS that works with round hygrometers that are available on Amazon in the US. Use the top from SamH's remix project. Updated 10-20 Added indent to back wall for AMS roller…
Sonic, the title character of Sega's Sonic the Hedgehog video game franchise, created by Naoto Ohshima and Yuji Naka. Sonic is a blue hedgehog who can run at supersonic speeds and curl into a ball to attack enemies. He races through…
Basic profile containing over 9 sizes, new improved links and lock, easy to print with no bridges in the links. This is the standard, non dragon or unicorn bracelets, completely new and improved, with new facial designs, link design and…
A whole lot of Sonic the Hedgehog characters. For characters like Tails who float above their platform plate, there’s a version with a connection. Includes: Sonic Tails Knuckles Shadow Silver Rouge Espio Charmy Vector Classic Sonic Blaze…
Make sure to choose the correct plate version for your funnel (plate_GC_revised or plate_GCP_revised) Fasteners (to attach touchscreen housing): 2 M4x10 button-head screws 2 M4 nuts Loctite 242/243 or equivalent Recommended Print…
This is a from-the-ground-up reimplementation of Zack Freedman's Gridfinity basic undivided boxes using CadQuery instead of Fusion 360. See this video for further information about the project: This version is customizable in CadQuery so…
Print your own 3D printer filament Dry Box! Check out this video I made about it, including assembly instructions: Parts are optimized to work best with PLA filament. Easy printing, no support material needed. Snap-fit rollers, hygrometer…
Created a new Silica Gel Desiccant tray for the Bambu Lab printer. I think there must've been some revisions on the AMS unit because the trays I've tried on this site don't fit because the ribs are too long on my AMS. I tossed a rubber…
CAN LID – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆 One-finger…
I wanted a skull that kept the sharp robotic angles of the original head, so here it is. A basic spooky skull for the Dummy 13. I include two versions, one with the original jawline and one with a slimmer jaw.
This assembly is for adding scales to your Gaggia Classic or Gaggia Classic Pro. Compatible with two HX711 boards or Vas' dual HX711 board. Requires 750 g load cells. Please use the assembly instructions at gaggiuino.github.io…
A music box that plays never gonna give you up see my other rolls for different songs
About I really love original Silica gel spool container by @gdrag. However I wanted to achieve Three additional goals: Make a spiral (vase) print to reduce filament and time, Add some distance between side holes and internal wall of the…
Heyho Ich glaube mein Schwein pfeift :) (German) my daughter had a beautiful ocarina made of clay. Unfortunately, this had fallen down and shattered into 1000 pieces :( So since she was very sad I downloaded and printed a simple one. But…
Print it, pull it off the bed, slide it in. One piece, zero assembly. Classic drawers print in one go with the handle built right into the front. No faceplates, no screws, no clips. Pop it off the plate and it is ready to go to work.…
Should fit V1-V3 of the AMS. Printed in Black ABS. Sensor version needs support. Brim recommended since it is tall and narrow. Update: Version 2 w/increased desiccant volume.
There is no need to follow the curved form of the bottom of the Bambu AMS. So this is a straightened version of Eldon's model. It has a bit more volume, is easier to print, no supports needed!, and I designed a stand to fill the trays to…
Desiccant box for the K2 Plus CFS system with optional custom lid which snaps into place like the original. If you prefer the original, it's compatible. Print in provided orientation, no supports needed. Turned out great with Creality…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Simple case for iPhone 13 Pro Prints easily with PETG or PLA
The default model is 2mm thick and arround 40cm. It was abviously to large for my ender3 so i split it in the middle. You can scale the parts as you want but don't scale all the axis the same otherwise the tickness will change too. You…
This is arguably the best tray for desiccant beads for the AMS of Bambu Lab. The lid has a recessed grip where a lamella of the tray sticks through. this allows to easily take out the entire tray including the lid but without the risk of…
This desiccant container fits inside the Creality Space Pi (single-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a double-spool…
I redesigned them mostly from scratch to make them slimmer and fit in th AMS with the new Hydra Pro mod. They're about half the size and fit in the Hydra Pro AMS like a glove. The convenient knurled tab on the back make it a breeze to…
A desiccant canister designed to be mounted in the center of a spool of filament during storage to help keep the filament dry. The canister has a lock-ring which threads onto the opposite end from the cap, after the canister has been…
Hi! This is another Electric speed loader for Airsoft. This is the basic version. You can also get the upgrade package here: https://cults3d.com/en/3d-model/game/airsoft-electric-speed-loader-upgrade-package-to-advanced-version It counts…
After printing both versions of the center case that supported the addition of the hydrometer, I realized that while the second case looked better aesthetically it did not function well due to the lack of airflow around the unit. Remixed…
I needed a better desiccant container solution for my cereal box spool containers. Most models take too long to print and do not have enough holes. My design is 45% nothing. Meaning holes. Meaning air can flow freely. It uses 14g of…
Improved Auto Coin Sorter - Coin Roll + Classic Version New in latest version 7.527: Improved geometry to increase reliability and accuracy of the sorting. Improvements: Sorts into removable coin tubes to facilitate both general operation…
I loved a similar wooden construction toy when I was a child. However, as more and more components break and my children show a lot of interest in building and constructing, I have started my own printable system. The files in this set…
Playing with Paid version of MeshyAI HighPoly Mesh Output + post Texturing. Verdict. Slightly better mesh but messy texturing (seams are not clean). Displacement seems to be less predictable. Probably just need to play with it a bit more.…
These models of high-detail metric screws with a 3mm diameter are available in various lengths of 10, 12, 18, and 20mm. These screws are very common and are also used to assemble Original Prusa Printers! Warning: Do NOT use these screws…
Strongly recommend this remix/remodel ------------------------------------------------------------------------------ A really simple desiccant spool center for Bambu Lab's spools. Does not interfere with AMS and has an easy twist lid.…
A remix/remodel desiccant holder. My original model isn't ideal because when you swap it, you risk spilling the desiccant. Humebean's model is far more ideal because it has an inner lid, but I wanted to make a few tweaks. Uses 3d printer…
Own a legend of automotive performance with this 3D printable STL model of the Porsche 911 Turbo (930). This classic German performance car model is perfect for automotive enthusiasts and fans of iconic 70s and 80s supercars, showcasing…
A desiccant box with lid for the Sunlu Filamantdryer S4 I printed this in ASA to prevent melting. According to @avastro_56112 PETG works well without warping. Thanks for the Information! Printable without supports. Please let me know if…
He may be a baby, but don't be fooled, he's pretty big. This design is easy to print in any material, 100 percent print in place with no assembly - Almost entirely rebuilt from a past design of mine. (Commercial licence is only for…
Recommend printing in PETG Personally I printed it Gyriod with 20% infill and 5 layered walls for extra resistance. FOLLOW Radical Maker’s instructions for more details. ***DO NOT put full strength into the clamp it will possible snap…
Popsicle Layered Fidget Toy 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15-20% Infill Supports needed. Print in place. Dimensions of Popsicle: 2.75 in. X 5.5 in. x .75 in. I do not recommend scaling the print smaller due to…
Green Lantern Rings Inner diameter: 22.5 mm (0.885" according to google) No supports needed (when printed logo down) Design based on older photos from…
Update: 2024-02-25 – I added a new version of this model with a small lip around the edge, where the lid and body meet. This makes it easier to remove the lid, but still provides a nice snap fit like the original.…
If you like my work I hope you'll consider supporting me on Pateron: https://www.patreon.com/3DPrintingProfessor Subscribe to me on YouTube: https://www.youtube.com/user/mrjoesays After seeing the overhang on tzzhc4's print (…
Print it, pull it off the bed, slide it in. One piece, zero assembly. Classic drawers print in one go with the handle built right into the front. No faceplates, no screws, no clips. Pop it off the plate and it is ready to go to work.…
3D Basic geometric shapes Shapes: - Cylinder - Prism_triangle - Prism_right_triangle - Prism_Pentagon - Prism_hexagon - Prism_star_5 - Prism_star_6 - Cube - Cube_hollow - Cube_rounded - Cube_rounded_hollow - Sphere - Semi-Sphere -…
A quick printing funnel to aid in filling the desiccant holder of the Polymaker PolyDryer Dry Box. Balances the holder when filling, quick to print, oriented for proper printing, print in any material, no supports needed.
Wheel Chock for car. Should work for most car tires, not recommended for truck tyres. No supports required. Recommended to print at 0.35mm, resolution is not really important. Do not use this for safety.
This desiccant container fits inside the Creality Space Pi Plus (double-spool) filament dryer. It is designed for standard 3-5mm silica beads, but it can also be filled with silica desiccant packets. If you are looking for a single-spool…
A nice simple test for the MMU2 (or MMU2s) which uses all five filaments. Gcode included for MMU2s and MK3s Print instructions I printed these at 0.2. Gcode included.
update 5th of April Finally, the highly anticipated update to the base tile! The two part improvement was easier to print, but needed glue for good usability. I have been looking for a better solution for a long time and I think I have…
Inspired by the great idea of @skuidball about having a second container in the Polymaker PolyDryer box, I've decided to make my own design of an extra desiccant container. It fits the back side of the box and matches the ergonomics and…
CAN LID CLICK – BASIC SERIES 🥤 A 3D printed can lid designed for maximum practicality and protection. 🔥 Key Features 🖨 Easy one-piece print – no supports, no assembly 💪 Strong, secure grip – holds better than typical alternatives 👆…
I made this design inspired by the traditional hand fans made of wood and paper (or fabric): The front and back guards are heavier, protecting the blades when the fan is closed, but also adding some weight so that it can be swiftly opened…
Popandsicle’s Master Sword is totally genius. The sword prints without supports, doesn’t require glue, and looks amazing. Plus, it’s free! However, the original model is designed so that all pieces fit on a Prusa Mini. This is really cool…
Designed to fit inside center hole of filament spool in storage. Prints with no support necessary.
It is designed to be used together with the filament spool inside the AMS to create the maximum exposure of the desiccant to the internal air. Model shown in the photo : Material: PETG Printer: Default setting Bambu Lab filament spool…
Made these for decorating a gift (concert tickets). Just traced them out from some pics.
r = 35 mm h = 100 mm
I find this design works well in the Creality CFS. Currently there is an app to program the MIFARE Classic 1K RFID stickers to be used with the Creality CFS. App found here:…
16 different insets which can be used with my basic tile. Update 8th of February 2022 added two new insets as requested by an excited user of my design ;) (1 straight, 1 long corner & 1 straight, 2 long corners) Pick the ones which you…
There are many Nissan emblem designs from the CAD community but this one is mines LOL! *NOTE : When printing this design, you WILL NEED SUPPORTS for the “Nissan Emblem - Body”. For both the FDM, FFF, and SLA printers you will need…
Spooky season is coming so I decided to make some Halloween Pumpkins. This is the second one I decided to put on printables, but there will be more in the near future. Hat is in two versions -without pin -with a pin for easier attachment.…
Slim Drip Tray for Gaggia Classic that fits where the normal drip tray does. This adds enough room for a scale to fit underneath Also added a version with rounded edges for easier printing
Since a lot of people liked the incremental rotatable version, I made a basic version that rotates the full 360 °
I always print the Dummy in 250% now that I did it once and loved it. It's basically Barbie sized and allows for so much more detail in both the Dummy and the accessories. I have been asked a number of times now about sizing of the Dummy…
These chess pieces use modular tiles. This lets you print them in different colors if you want, and there’s no need for a multi-material system. After printing all 64 tiles, press the tabs from on bottom (if it is stuck) and snap them…
Improved Auto Coin Sorter - Coin Roll + Classic Version New in latest version 7.527: Improved geometry to increase reliability and accuracy of the sorting. Improvements: Sorts into removable coin tubes to facilitate both general operation…
This is a new, improved version of my original vase-mode desiccant container. I changed the side holes to extend inward rather than outward, so the outer surface is much less likely to poke holes in your filament storage bags. Total print…
GoPro Mount (Basic Flat) - Print your own GoPro mounts cheaper (10g = $0.50/0.50 EU/ 12 CZK)! - TESTED: very resistant
Silica Dry Box for BambuLab AMS with rectangular hygrometer and vertical slots. Updated 10-20: Added indent to back wall for AMS roller fix from 'dietrich'. Also added the original lid for convenience. Updated 10-18: Updated with vents…
Step into a storybook with this enchanting Whimsical Fairy Cottage ! Perfectly detailed with curling vines, layered shingles, arched windows, and a heart-carved door, this model brings charm and fantasy wherever you place it. Whether…
Check out my patreon www.patreon.com/wekster
The Donut Espresso Shaker is an espresso shaker that enables even distribution when preparing espresso for a wide range of portafilter sizes. What makes the Donut Shaker special is that it achieves this result with any portafilter size…
To print this, use Spiral Vase mode. Change line width from 0.4 to 0.7 (increase by +0.3mm to each width settings). I used ABS , when choosing the filament take into consideration the dryer can heat up to 70c. I designed this desiccant…
Since I started working on a dice generator, I would like to share one of my first creations from it. In the current state, it's still quite experimental, but the final dice generator aims to allow you to exchange every single side with…
Source code (designed in SolveSpace): https://github.com/nazar-pc/matx-open-test-bench It only has motherboard tray and support for 4 expansion cards. No I/O shield or anything else, has cut-out on the back for easier cooler and back SSD…
Parametrized Music Box - Print in Place also on MyMinifactory and GitHub Musical calculations remixed from Parametric Music Box See it in action and in closer I'd strongly suggest ABS or something with good fatigue resistance for this…
This project uses low temps, high extractions, slow speeds, and several other tweaks to remove oozing and major defects with this specific TPU filament. Make sure to have your tensioner screw as loose as possible and use a 0.4mm nozzle.…
A nice design for a desiccant container that fits in most spools. It has a hollow core to maximise the exposure to the contained desiccant. Each container takes about 50g of 3-5mm desiccant. Print the pot at 0.2mm layer height with 2 wall…
This is a remix of Eldon's box, I wanted it printable flat with no supports. I also don't mind not using the default screen door so I can see if the desiccant has changed colours (I used a colour changing desiccant).
VERY IMPORTANT NOTE This is not a simple print, assemble and enjoy project. It requires quite some experience, basic knowledge in electronics, a good amount of patience and probably some nerves (it's worth it!). I'll try to give you as…
In the first use of the AMS of bamboo, I found that the humidity level was very high, so I put all the bags of silica I had inside it and try to solve the problem. After having dried all my material in an oven at 60ºC, yes, I know it is…
Usefull things Set part 5 : Drawers handles 150mm holes axes. I don't have a 3D printer so if I could win a Prusa i3 MK3S at the "pratical contest" it would be fantastic. Rate and ask me for 3df files Please vote for me !!! Dje See also…
Mini 13: Figurine System Compatible Melee Weapon Set, includes 5 weapon designs: Scimitar Shortsword Longsword Sabre Katana
![BUILDfinity construction play for kids // Konstruktions-Spiel für Kinder [BASIC-SET]](https://media.printables.com/media/prints/689810/images/5419730_f64e8cc2-1d55-47b6-9e6b-2c5134cba6e2_07046611-77fd-476f-8e21-a513fe78a163/buildfinity_2.jpg)
