126 models
This is a hammer and sickle, the symbol of communism. I created it by getting this SVG: https://commons.wikimedia.org/wiki/File:Hammer_Sickle_Star_red.svg , using Inkscape to remove the star, importing it into FreeCAD, converting to a…
Was absolutely stunned by @Druz320 Canoe inspired SMOLBOAT case. I had to have it...but it was for ortho keyboards, too large to print, and I wanted to use my teensy mount as well as other things I learned from my previous keyboards.…
Do you have anoying commie friends? Print them hammer and sickle opener! Do you want to terrify your grandpa, who was under arrest in comunnist regime? Print them hammer and sickle opener! I recommend infill around 60% or 70%. Can be used…
06-12-2023: Apparently I'm an idiot because I never saw the comments saying that the scaling and orientations were stuffed up so I scaled them to ~8000% and oriented them all to Hopefully print well so I hope these new files work better.…
This is my recreation of death's sickles. This design not only folds and locks into position like in the movie, but they are also to scale and as close as possible to what we see. Printing: I recommend PETG or another tough material to…
1.- Motivation As with all prints I do, all start or from a need or a lust-to-have. As an additional hobby that I have is to grow hot peppers, and at the beginning of each season, I grow new seedlings from new varieties, therefore there…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Piggy bank. Size 85x85x85mm. For finish use glue for hard plastic (UHU. Tamiya...) when You need.
This model is compatible with the lego system.
The SiCK-60 could really use a companion. This little numpad should be the perfect addition to your 60% keyboard. Built to be handwired with a Teensy 2.0 and costar 2u stabilizers. For more information on this keyboard along with full DIY…
You can easily do same multicolored key fob using Cura tools. You need to yose "filament change" script to do it. You can support me by visiting my community here
From the movie Puss In Boots: The Last Wish Note: Some pieces may need to be scaled to 10000%
Offutt AFB static display aircraft B-17 Homesick Angel Category: Vehicles
Sickel This is a sickel modelled after Miraculix / Getafix / Panoramix from Asterix the Gaul. It looks like on the cover of The Golden Sickel ! https://www.youtube.com/watch?v=8m1kYK\_U66I Print Settings Printer Brand: Ultimaker Printer:…
We were playing this week, and thinking, that it would be nice to have some kind of marker to show what cards has summoning sickness. So I made this. And because someone else might want to use these too, here! It was inspired by the old,…
Following up on the SiCK-68 keyboard, the SiCK-60 is an more compact 60% option with the ability to use a wide variety of inexpensive PCBs as well as a version that can be handwired with a Teensy2.0 micro controller. For more information…
Coming from a low profile mechanical keyboard (Logitech G915) I wanted to try out a high profile mechanical keyboard without spending too much money on it, so I thought why not try and print a keyboard. I had keycaps from an old keyboard…
I really like Exner's medieval weapons and wanted to add a weapon idea to the mix. This is an experimental design, and i may need to do some adjustments. I have noticed the blade is a little tight on the screw, and you may need to set the…
This model is compatible with the lego system.
Kasička ve stylu fotbalové AC Sparty Praha. Print instructions Tisknuto na MK3 nejsou potřeba podpory snižte rychlost tisku při tisknu částí se závitem
The bottom-left part of SiCK-68 keyboard modified to accept a Waveshare RP2040-Zero microcontroller . Has a snug opening for the USB-C port and the controller is fully constrained – you won't be able to wiggle it loose using a USB-C…
Hummer and sickle Esc keyboard I just reupload it on this website because I searched a lot to find one like this
This is Getafix's sickle from Asterix. I quickly drew it up looking at pic from the front of one of the books. Borrowed a little inspiration on the base of the blade from Asterix and the Golden Sickle, but otherwise the details match…
Shoe dryer, 140mm Fan standart PC. I used Arctic P140. Cabeling could be solved by many different options. My inspiration was Noctua NV-AA1-12 but with more practical usage. It could dry shoes really fast and without heating to damage the…
Funny Sign - "I'm getting real sick and tired of food having calories" - dual colour design, printed in ZIRO Black and Overture Matte White PLA. For more funny signs see my (growing) collection of them here -…
You can choose between a lifesized or a lego-sized version. The lifesized version is about 30cm long and is printed in two seperately parts (+1 connection part) which can be clued together.
This is a slightly modified version of the SiCK-60 (super inexpensive cheap keyboard 60%) Joined both sides into a single part (fits on a 300mm square bed) Re-modeled everything so I can provide a .STEP file (easier to modify) Adjusted…
Hammer & Sickle Directions: Print hamsick face down with some inflill Print back face down no infill Print plugs Align and fit hamsick through back holes gently. Super glue plugs on back to secure pieces Hang from wall Remix of model by…
drzak na kapsicku. na zpusob https://www.homolkovic.cz/drzaky-obaly-na-kapsicky/drzak-obal-na-kapsicku-dopravni-cerna/
Hi, I decided to add here my first model which is this dice. Dimensions are 16x16x16 mm . I recommend setting the infill to greater than 50 %. for more dice weight I hope you'll enjoy!
I printed this with the back of the gate parallel to the bed so any scarring that may occur from supports would be hidden. Of course, you know your printer's capabilities, so print it in a way that works best for you. If perimeter lines a…
kasička plechovka na ůkol do školy a do soutěže
This is the first version of a guitar wall stand I've made. UPDATE 1: I realized that it might need only a bit more distance to the wall for some guitars (specially acoustic guitars) so i added a base as a separate object so that it…
The Ultimate "Called In Dead" Office Humor Sign! 🤣 You know the feeling, right? This sign perfectly captures that end-of-the-sick-days mood! With its eye-catching yellow and black design and an adorable skull, it's the ultimate piece of…
Remix of Mechanical Keyboard - SiCK-60 (60%) by FedorSosnin where the top-left+right and bottom-left+right parts have been merged as per a request on reddit. Merged using Fusion 360. Print Settings Rafts: No Supports: No Resolution: 200…
This remix of the SiCK-68 mechanical keyboard changes the lower left part of the keyboard such that is able to fit a Raspberry Pi Pico microcontroller. The next iteration of this Thing would add mounting screws for the Raspberry Pi Pico.…
Remix of the Sick68 keyboard case by FedorSosnin on thingiverse. Cherry style stabilizer mount remix by spv_one on thingiverse. I've changed the lower left part of the case so there's more room to fit a teensy inside, as my test prints…
A full-size decorative sickle prop with a sweeping curved blade and a handle modeled to resemble carved wood. Designed for cosplay, LARP, theater and historical displays, it prints in one piece without assembly and can be painted for a…
This is for an Essick Humidifier, Model #836000HB. As you can see in the images this unit pulls air in through the top then blows it out the front of the unit. When it comes out it goes straight up and I felt like it was pulling most of…
Hello, Today I have Japanese scythes, sickles for you. They are ideal for opening boxes, or perhaps as an accessory for cosplay. They are not sharp! They are not dangerous. You have 2 models from me, one is whole and the other is in 2…
DANGER - CHOPPER SICK BALLS, sign (Stand By Me) Stand By Me clip: Category: Signs & Logos
A simple “snap on” blade guard for the Zenport K310 garden sickle. It did not come with any sort of adequate protection, and they wanted $35 for a leather sheathe, so I opted to create my own guard. 30 minutes in Blender and about an hour…
This is a custom case to fit reel to reel albums designed around the art of Ren's album Sick Boi You need a printer with material exchange capabilities to print this model. The reel spool will be shared in a different upload.
Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Red PLA BambuLab Basic Yellow PLA BambuLab Basic This print uses 4 unique filaments Swap Instructions: Layer height .08 Initial layer height .16 Start with Black At layer #8…
Box na kartáčky do sprchového koutu klasický / hornický Dva modely: klasický hornický Na svislou trubku o průměru 22 mm. Přichycení elektrikářskou stahovací páskou.
I printed this on it's side with regular supports and it came out pretty okay. The Handle portions are a little less on the snug side but any thicker and they would have been too large. Kinda just a neat thing I made on stream.
These are the Ice Sickles from the video game Grounded 2 (there is only one file but it should be symmetrical so simply print it twice for dual wielding). This 3D printable file isn't endorsed by Obsidian Entertainment, Inc. and doesn't…
Light barrier holder Sick WTT12L Bracket for light barrier/light button industry zur Befestigung einer Lichtschranke von Sick Typ WTT12L an einem ITEM Profil for attaching a Sick type WTT12L light barrier to an ITEM profile
my third up and down, fractal star fidget
Both pieces need to be scaled together at once in the slicer, supports will be needed. Selling this model printed is completely fine with me but do not reupload my files or claim it as your own!
The top left part of the keyboard was modified to remove the original logo. This lends a sleeker appearance but also opens up possibilities for users to effortlessly incorporate their own logos or text.…
This band is a model based on similar medical bands used for relief from morning sickness, sea-sickness, motion sickness, and other nausea. This is the fourth version as tested on my wife to her approval. Print the band in TPU or another…
I made this for my Radclo controller so that I could have more grip on the joystick while flying. This is intended for a Radclo Quadcopter , but look at the size of it at the end of all the pictures. Fast Print! Printing Settings:…
Soporte para evitar golpes en una fotocélula SICK Wl100 montada horizontalmente.
DANGER - CHOPPER SICK BALLS, sign (Stand By Me) Stand By Me clip: Category: Signs & Logos
I am learning Blender, so I thought this would be a fun beginner project. First, I added the remesh modifier, choosing voxelize with a very large voxel size. Then I went into edit mode, extruded a couple sections of the hull of the…
[EN] Created as a school project and fully tested on an Original Prusa MK4. Fits perfectly and rolls great! If you print this, please share your "Make". [CZ] Vytvořeno jako školní projekt a otestováno na tiskárně Original Prusa MK4!…
This is a Dispenser made for 3x3 Sticky Notes! It even has a working lid!
I made it cause my Sickspeed covers (19mm) are made of aluminium and to prevent them for any scratches, I make an opener for them. I Print it out of ASA CF15 which hold ~35NM (19mm version) 0,15 Layer high 8 perimeter 100% infill no…
A 3D-printed frame in the shape of the hammer and sickle symbol. The spacing used is suitable for continuous LED strips, which create the effect of a neon lamp (for reference, the model used is the same as the one found at the link:…
Sick inspector robot vision 45x45mm extrution mount. Can be mounted as an extension to extrution if needed. Printed in pla, upright with no supports.
Držák čtečky čárových kódů Sick
Multicolor : Hi everyone! I don't have time to create a multicolored version optimized for those who don't have cfs-ams-mmu3 right now! If this model interests a lot of people, I might dedicate more time to it, but right now I'm not even…
This is a desk organizer with two extra stands for notes or whatever you want. You can choose between 1mm walls and 2mm walls. On the picture you can see the 1mm version.
A simple tabletop tracker for creature-token-heavy MTG decks. The frame holds one standard sleeved Magic card and has three dice positions for keeping track of your tokens: sickened – Untapped tokens with summoning sickness tapped –…
Soporte para colocar una fotocélula de herradura, marca SICK, modelo WF120, en una cuadradillo de 10mm., también hay un stl para el modelo de fotocélula más pequeño.
Suports per a col·locar una fotocèl·lula i proteger-li de cops. Serveix per a fotocèl·lules SICK WT100 amb connector recte o de colze, també hi ha un stl per a col·locar-la a 30 graus.
Žetony s čísly 1-9 opatřené drážkou pro připevnění na klasické kolíčky. Původní záměr: Pomůcka k hlídání iniciativy postav v TTRPG
After fiddling around the model (35 versions or something) and 3-4 different magnets, i can confidently say that, this version satisfied me 100%. Parts fit the joystick friction fit. No cuts, no holes all reversible. Friction fit depends…
This is a replacement funnel for the large Essick pedestal humidifier. I picked up a used one that didn't come with the funnel, so I created my own version. Print it standing up. No supports needed. Category: Household
I made this tool to assist in the removal of the comm cable for a Sick OS32C Scanner array. When installed, this connector is not easy to access. This tool slips over the connector and is sized to fit a 3/4" wrench.
Remixed SonjaSelena's model as I wanted mine to last longer, and the springy/gap design looked like it might snap easily. Added a simple round 'coin' back, so that it's a solid object, with the sickness shape sticking out of it. I don't…
I wanted a quick and simple way to test the bc 250 with some leftover parts I already had, an atx psu and 3 x 140mm fans. BOM: 1 x amd bc 250 board 1 x atx psu (mine is coolermaster rs-500-acaa-b1) 3 x 140mm pwm fans (mine are thermalTake…
Pomůcka pomáhá žákům názorně řešit úlohy na sčítání, odčítání, úlohy s rovnicí, parametrem, či kombinatorického zaměření.
drzak na kapsicku. na zpusob https://www.homolkovic.cz/drzaky-obaly-na-kapsicky/drzak-obal-na-kapsicku-dopravni-cerna/
Modèle de boucle d'oreille faucille et marteau inspiré de ceux trouver à la tête de l'Humanité.
This is a digital 3D-printable model of Melinoë’s Sister Blades from Hades II , made for easy cel-shaded painting . Both blades include sculpted outlines to help guide your paintwork . 🎨 📦 Included Files STL (cut for 200mm printer beds)…
Hummer and sickle Esc keyboard I just reupload it on this website because I searched a lot to find one like this
After fiddling around the model (35 versions or something) and 3-4 different magnets, i can confidently say that, this version satisfied me 100%. Parts fit the joystick friction fit. No cuts, no holes all reversible. Friction fit depends…
06-12-2023: Apparently I'm an idiot because I never saw the comments saying that the scaling and orientations were stuffed up so I scaled them to ~8000% and oriented them all to Hopefully print well so I hope these new files work better.…
Coming from a low profile mechanical keyboard (Logitech G915) I wanted to try out a high profile mechanical keyboard without spending too much money on it, so I thought why not try and print a keyboard. I had keycaps from an old keyboard…
Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Red PLA BambuLab Basic Yellow PLA BambuLab Basic This print uses 4 unique filaments Swap Instructions: Layer height .08 Initial layer height .16 Start with Black At layer #8…
Printed at .15mm layer height and 250% Z scaling gave a decent physical print.
This is my first attempt at creating an handwired mechanical keyboard from scratch. It is a 44 keys split ortho keyboard that I made to play FPS videogames (mainly quakeworld). To build it it's needed: To 3D print both halves and both…
I did not print this model myself (yet). There are 2 sickels with a long staff that fit in the hands of: dummy 13 1.0, dummy 13 Beta, easy 13, lucky 13 and mini 13 figures created by soozafone.
A stylized model of the Hammer and Sickle representing two working-class groups whose alliance is considered fundamental to the advent of a communist revolution.
This model is a 3D rendering of a classic symbol of class struggle in the 20th century that represents the worker-peasant alliance. It has a simplified silhouette but is still well-recognizable. The model comes with a variant that allows…
Some of these swords will need supports so if you are struggling to print that's probably your issue
Sickle keychain. It has 46mm x 30mm x 3mm sizes. You can rescale it if you want.
