Counting matching models…
Designs to use with thin (1.2 mm) rubber pad for tighten fixation on the handlebar (ø22,3mm) Print Settings Printer Brand: Prusa Printer: Prusa Steel Rafts: Doesn't Matter Supports: No Resolution: 0.2 Category: Camera
I designed this frame for necessity. Maybe I'm going to improve it, for example with a camera block system. If you have some ideas let me know that. There is also the Autodesk Fusion 360 file if you want to do some adjustment. Let me know…
I've created this case model with openings on both sides because I couldn't find batteries for this camera, so I've decided to power it with a power bank. The tolerance is low, and the square hole in the front helps to remove the camera…
Modelo base para crear monturas para camaras de acción (incluye proyecto FreeCAD con ejemplos). A partir de esto podrás crear diferentes monturas según tus necesidades. Incluye dos modelos, con hueco para tuerca y liso para palomilla, y…
Fits either 1 or 5 batteries. Designed with a lip so the batteries don't fall out but are easy to remove. Can make versions with less/more batteries upon request. Print instructions Category: Camera Print Settings Printer: Anet A8 E3D v6…
This is an attempt to design as compact as possible 3 axis brushless gimbal for SJCAM and gopro cameras. Gimbal is designed with RCTimer GBM2804 motors in mind and targets (with the current frame mount) a flamewheel like frame with 37mm…
Zenmuse H3-3D Gimbal SJCAM adapter (based on SJ5000+) The cable can be made by removing the USB connector from gopro hero3 USB cable supplied with the gimbal and soldering the SJCAM/XIAOMI micro USB to AV cable instead (2nd photo).…
Handle that works for SJCAM C100+ and also probably any GoPro. Simple, but buoyant, as it isn't solid. This makes it perfect for filming, as its light, and perfect for things like snorkeling, because it is buoyant enough to float the…
Fits very nice on Eken H9, and also added a little support behind for power button and shot button. Probably fits on SJCAM xxxx and many other chinese action cameras. I printed it on TPU with supports just on floor Category: Hobby
Camera mount for the front of the Beluga, or Trx4 Bronco. Very Sturdy, and uses existing mounting points that are there by the manufacturers for the fake winch on the bullbar. Uses the original spikes on the bullbar to go into the front,…
It is a very easy model. It comes out quickly and is fully compatible with the camera.
Mount for holding sjcam m20 in the center stem of a bicycle. The stock "gopro" style mounts are terrible and vibrate like crazy (the one it snaps into with a camera style thread). Would probably need to be modified for your stem, as this…
Remix of felxible SJ8Pro camera case. All mic and speaker holes are covered.
current orientation prints well with organic supports, test model was in PLA+. i am using it outdoors with a model printed in PETG
The box and the insert are printed from what we have. And you can choose the maximum layer thickness! For the sealant, TPU is the best choice. But it doesn't have to be.
Due to the specific tilt of the camera mounting surface, the accessories supplied with the camera required building a complex and bulky setup with multiple connectors and screws. That’s why I designed an arm that is a single piece,…
I designed this to stop the jello (vibrations) on iflight green hornet. Its using coated bowdens, I tried with sjcam sj8 pro, but I think the gopro can fit too... It can be fitted to a standrad gopro holder. Check for my other design for…
gridfinity holder for sjcam c300 including 2 battery's Used charger: gat-0502000 but will fit most similar sizes as well.
current orientation prints well with organic supports, test model was in PLA+. i am using it outdoors with a model printed in PETG
Some mounts for my SJCam also can be used with GoPro and other action cameras. 15,07,2019 Updated models 1 and 2 17,07,2019 Updated all models, small fixes + added new one for 40mm tube.
Sample image of the internals have the battery terminals interchanged. Follow the battery of the camera for polarity! Original design by Donald Papp in Hackaday , the original files of which can be found in his github page . Rather than…
The box and the insert are printed from what we have. And you can choose the maximum layer thickness! For the sealant, TPU is the best choice. But it doesn't have to be.
E replacement of original camera holder for those who break it
Tilted camera mount for GoPro-format action cameras (GoPro, Xiaomi Yi, SJCam and others) on the ZMR250 racing quadcopter frame. 4 different versions in 20/25/30/35 degrees tilt. Use two zipties and double-sided tape to mount to frame. No…
A simple tripod mount for the Qumox/SJCAM/SJ4000 (and possibly other clones). The camera snaps into the support tightly. The mount has a threaded hole for a tripod screw. The camera can be mounted in both directions (facing the clamps or…
i got bored and made cam mount for sjcam s5000x u can put it on any round tube and hold it w clamp also u need that case u have in the box actually i made it so i can mount my sjcam s5000x on the snow scooter or my bmx i use 25/40 clamp…
There is a LYZRC L900 pro drone. It flies well, but the stock camera doesn't capture very well, and sometimes we want to capture our moped rides from the side and share the beauty of our nature. As a solution, we decided to use the SJCAM…
A simple remote holder for an SJCAM camera to attach to a slim bar in a motorbikes handle. The slot for the bar is 9.5mm and it has slots for zipties to fasten it to the stabilizer bar in a motorbike handle. The remote just slides from…
SJCAM LENS HOOD LENS IS 22.5 let me know in the comments if this might fit on multiple action cameras! I am brewing to design more accessories for this camera. so if you have any interest then follow me Print Settings Printer: ENDER-3…
Hi, I replaced original lens by better one ($16 gopro 3 replacement from aliexpress) and made small mod for new (longer) lens. It's abs printed and I used epoxy glue to mount it to original case. Category: Sport & Outdoors
