1 / 4
DJI Phantom Zenmuse H3-3D Gimbal SJCAM adapter — image 1
1 / 4

DJI Phantom Zenmuse H3-3D Gimbal SJCAM adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Zenmuse H3-3D Gimbal SJCAM adapter (based on SJ5000+) The cable can be made by removing the USB connector from gopro…

Rating
0 / 5
Likes
5
Downloads
45
Makes
0
Views
1,000
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Zenmuse H3-3D Gimbal SJCAM adapter (based on SJ5000+)
The cable can be made by removing the USB connector from gopro hero3 USB cable supplied with the gimbal and soldering the SJCAM/XIAOMI micro USB to AV cable instead (2nd photo).
Adapter should be secured with 2 screws and a bit of hot glue in the corners.
The thin wall inside is the support, to be removed after print.
TURN THE PART UPSIDE DOWN and align the part or tweak you slicer so that the first layer of the middle plate is printed diagonally for best results.

UPDATE added the schematics of the cable.
On sjcam/xiaomi AV cable there are two black ground wires, but the placement does not matter since they are connected together inside the usb plug.

Print instructions

Category: R/C Vehicles

Tags