1 / 4
DJI Phantom Zenmuse H3-3D Gimbal SJCAM adapter — zdjęcie 1
1 / 4

DJI Phantom Zenmuse H3-3D Gimbal SJCAM adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Zenmuse H3-3D Gimbal SJCAM adapter (based on SJ5000+) The cable can be made by removing the USB connector from gopro…

Ocena
0 / 5
Polubienia
5
Pobrania
45
Wydruki
0
Wyświetlenia
1000
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Zenmuse H3-3D Gimbal SJCAM adapter (based on SJ5000+)
The cable can be made by removing the USB connector from gopro hero3 USB cable supplied with the gimbal and soldering the SJCAM/XIAOMI micro USB to AV cable instead (2nd photo).
Adapter should be secured with 2 screws and a bit of hot glue in the corners.
The thin wall inside is the support, to be removed after print.
TURN THE PART UPSIDE DOWN and align the part or tweak you slicer so that the first layer of the middle plate is printed diagonally for best results.

UPDATE added the schematics of the cable.
On sjcam/xiaomi AV cable there are two black ground wires, but the placement does not matter since they are connected together inside the usb plug.

Print instructions

Category: R/C Vehicles

Tagi