Counting matching models…
Assembling: Put the bottom grid into the skimmer basket tube. There are 4 latches at the end of the tube. Material: PETG Nozzle: 0.4 Layers: 0.3 mm Infill: 50 % Skimmer basket tube: Skirt height: 20 layers Loops: 2 Brim: inside and…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
I felt that the chlorine pucks I put into the skimmer maybe disrupted the water flow so I designed this to be able to put the pucks on the side and still ensure a good flow. Should fit most standard skimmers, the measurements are: Height…
Print approx. €18.32–€22.39 excl. taxPreliminary estimate for PETGSource material: PET
Update: I have changed the CC license of my models because of the lack of clarity around AI use. If you want to re-mix, reuse, rewhatever my model, just ask.. I have been working on some skiffs for a silt sea adventure that my players are…
Print approx. €8.31–€10.16 excl. taxPreliminary estimate for one variant
These yellow parts are supports → you can easily catch into the pliers and remove.
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for PETGSource material: PET
Flush cover for a pool skimmer. Replaces the original part with a flush version. For situations where you want to cover the skimmer, to make sure that no downwards pressure on the skimmer can happen. Avoids constant water splash on the…
Print approx. €8.36–€10.22 excl. taxPreliminary estimate for one variant
I've got lots of sturdy painters poles, so I didn't want to buy another pole for this pond leaf skimmer. An adapter is available from @Mustang52_135279 , but I wanted thicker walls and the solid model wasn't available to remix. This…
Print approx. €2.40–€2.93 excl. taxPreliminary estimate for PETGSource material: PET
Tento držák nahrazuje originální uchycení skimmeru pomocí 3 přísavek. Velikost držáku je 150x50x3mm s uchycením na sklo akvária o tloušťce 6mm. Současně je skimmer oddálen od zadní stěny o 10mm kvůli lepšímu přívodu vody do ústí skimmeru.…
Print approx. €1.87–€2.28 excl. taxPreliminary estimate for PETGSource material: PET
This wrench fits the ~42mm hex head on the hose adapter for a Hayward in-ground pool skimmer, so that it can be installed/removed more easily. If you've ever tried grabbing the adapter with pliers or some other standard wrench, you know…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
Printed in Prusament PETG, 0.4mm nozzle, 0.20 mm layer height. To avoid using any support, here is the method I used : On your slicer, cut the model into 2 parts : the outer rim and the basket grid print them in one row glue the 2 parts…
Print approx. €4.51–€5.52 excl. taxPreliminary estimate for PETGSource material: PET
After using several skimmers on my external filter intake and losing small fish and shrimp, I built one for my internal filter outlet. Now there’s no more loss of small fish or shrimp, and the water surface stays clear. Settings for a…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for PETGSource material: PET
New version released https://www.printables.com/model/1349649-floating-pool-skimmer Skimmer for your pool filtration to collect surface debris. Model is optimised for 0.6mm nozzle print. For other dimensions settings may vary - use your…
Intex above-ground framed pool Skimmer Hack! I've updated the original design to allow you to extend the arm using a standard PVC pipe. Uses two M4 screws to hold the pipe in place (or you can glue it) For the ladder holder, I cut (2) 4"…
Umbau des Einhängeskimmer für Pool mit Luftring auf Steel-Frame Pools. Dateien sowohl für runde Rohre als auch Ovale Rohre vorhanden. Ausdrucken, mit 4 Schrauben und Muttern (am besten mit Unterlegscheiben) am Rohr montieren. Den…
A detailed description of the project is available on my homepage (in german): https://100prznt.de/pool/skimmer-am-rechteck-frame-pool/ Print instructions For long durability and tightness of the wedge, it should definitely be printed…
I needed an adapter to securely fit my Intex Skimmer to my Bestway Pool. The inner Dimensions are 32 x 47,5 mm. I chose to print it 60 mm long so that it fits between the tube connector and the plastic pool wall. As you can see the…
This is a ground pod, and camera gimbal for wildlife and macro photography. It is mostly 3D printed, and just requires a couple of bearings and some nuts and bolts. It is quite strong enough to hold my camera (~ 1.6 Kg) and I wouldn't…
People might(not) have noticed that the Intex Deluxe skimmer has bayonet connection on the inside. I made a bayonet adapter to quickly connect a 32/38mm vacuum hose to it which makes switching inlet hoses a thing of the past.
This is a 3D-printable floating pool skimmer designed to operate without any fixed mounting. It continuously adjusts to the water level, ensuring optimal skimming performance regardless of fluctuations. For proper function you'll need 1kg…
Credit to the original skimmer hack - however, even with the velcro, my net kept falling out of the holster, and not staying in the correct orientation. This addresses that issue by having the net snap into the holster. Additionally, I…
Better holder for intex/bestway skimmer (same shaft dimensions as original intex skimmer). Or you can use it for my iteration of pool skimmer Printed with 0.6mm nozzle. How to print: toppart.stl, bolt.stl: PLA 0.25mm layer (for better…
Le panier d'origine du skimmer de ma piscine Desjoyaux avait le fond cassé. J'ai recrée un modèle sur Fusion360 pour le remplacer. Il était trop haut en Z pour être imprimé sur ma MK3S+ alors je l'ai produit avec ma CR10S Pro. Vous pouvez…
This surrounder for intex pool skimmer will help you to maintain it properly check my other Intex pool thing for metal frame pool : (Pin - Nail) : https://www.prusaprinters.org/prints/29345-intex-pin-nail-clou-with-collar-collerrette-piscin
a recreation of a pool skimmer flap door that fits Olympic brand skimmers. modeled from an original part, however this is lacking the water flow guide fin, but in my experience that did not seem to be an issue, YRMV. the model is also…
Hi i designed an Aquarium Skimmer cause i think that cost of two pipes in shops is a "little bit" to high. I'm using it to my Fluval 207 it fits to original hose.
Witam, do pobrania mojego pomysłu i projektu odpieniacz białek do akwarium morskiego, odpieniacz przeznaczony do pracy z pompą Jebao DC 3000 lub 4000, mogą pasować inne pompy trzeba sprawdzić. Film z Budowy: Odpieniacz na rurze plexi…
The Pool Skimmers I found on thingiverse were much bigger than I needed and also the Bracket did not secure them nicely to my Pool, it kept working it's way loose and then lifting the bucket out of the Pool. I decided to try design my own…
Update 4: Added ddifferent versions of grid spacing Update 3: Modification for skimmer 212x204mm based on request Update 2: Optimized overall dimensions to fit MK3 printer Update 1: Optimized wall thickness to 1,2mm and added 1,6mm…
Print instructions I print with PETG, 0.6 mm nozzle that significantly speeds up printing and also makes the part mechanically stronger thanks to higher layer (0.3 mm in my case). Another non-default setting is use of 3 perimeters.…
Its fall and that means leaves in my pool, which then clogs up my skimmer basket and chokes out my pump. I saw someone else do this similarly, but decided to draw up my own for my pool. Simple $6 leaf skimmer from Amazon works PERFECTLY!!…
Intex pool shorter skimmer.
Simple skimmer door without sponge. infill 10 - 15% Print instructions Category: Replacement Parts Summary Simple skimmer door without sponge. infill 10 - 15%
Created quick and dirty pool skimmer for my backyard inflatable pool.
Hi, its replacement of skimmer basket , redesigned for easier 3D printing. Top diameter 156mm, height 73mm. With supports can be printed in one piece, but I recommend to print it in two parts (bottom and the rest) and then glue it…
~English text below~ Wer mich und meine Projekte unterstützen möchte und noch einen passenden Netzkescher benötigt: → https://www.ebay.de/itm/226808749634 Vielen Dank ; ) Saubere Pooloberfläche leicht gemacht – mit dem praktischen…
Simple inserting basket for mountfield pool skimmer Print instructions Category: Outdoor & Garden Summary Simple inserting basket for mountfield pool skimmer
A complete skimmer to keep the water surface clean for your fishtank. 09.02.24: additional skimmer basked added You can connect a hose directly to your external filter or pump. It is also possible to use Eheim connectors at the top and…
This replaces the stock intake tube on a Fluval FX4/FX6 aquarium filter to add on a surface skimmer. I did about 10 iterations of the float portion to get it sized and floating correctly so it stays at surface. Been running in my planted…
Allows you to change the direction of the Oase Crystal skim 350 flow
This is a surface skimmer for the Fluval 07-series canister filters. This contains all the parts you need in order to print and mount your surface skimmer and enjoy that crystal clear and clean surface, free from scum and debris. T-Joint:…
Holder for Bestway Steel Pro Max pool - skimmer net.
Pantala flavescens, the globe skimmer, globe wanderer or wandering glider, is a wide-ranging dragonfly of the family Libellulidae. This species and Pantala hymenaea, the "spot-winged glider", are the only members of the genus Pantala. It…
Do you have the betta pool skimmer? Does it get stuck on your sun ledge or first step? Then, this is the model for you
Modeled after the Air Skimmer I made in middle school, I decided to recreate the model in an easily printable and reconfigurable design using OpenSCAD. Modify the OpenSCAD code and tweak the settings as you like. The hooks are used for…
Hello, Skimmer Impeller for jebao DC 3000 pump, have a nice and successful printing, nozzle is my production from the beginning of the planning stage to the final stage, printed, corrected until satisfactory results are achieved, the…
Searching for a skimmer mount myself i discovered that there are different frame forms and sizes used depending on the pool size/model. Most existing models adapted to the original wonky clamp somehow and came loose when kids where…
Eheim Skimmer for Aquariums Print Settings Printer Brand: Anycubic Printer: Large Size Chiron Rafts: No Supports: No Resolution: 0,2 Infill: no infill Post-Printing Category: Pets
Is your skimmer always drifting, angled and far away? Print this and forget about it! This is a one-piece part, easy to print vertically, designed to adapt the Bestway skimmer support to Bestway’s oval steel bars. On one side, the oval…
5x M8 screws, 5x M8 nuts and 4 washers. Print with PETG. *skimmer3.stl should be printed really strong (5-6 walls + increased bottom and top layers + 20%+ infill).
I was under the impression that all pool net skimmers have a standard size handle only to find out that mine is too large for the model that I initially printed (and remixed). I needed a much longer tube holder with a larger diameter. The…
A replacement door for filtration intake, modeled after a Marimex original for the Olympic line of pools, however, this should fit nearly every single pool. There are a few very minor edits to make the springy parts a little bit more…
material: PETG infill: 100% perimeters: 1 layer: 0.2
This is a replacement for the handle on the skimmer basket for a Intex or Bestway above ground pool skimmer. I printed mine in TPU, but I think it would print well in PETG too.
This allows you to use a painters pole to attach a pool skimmer. Printed in Petg 0.04 Nozzle 20% infill
This is a highly customizable skimmer prefilter cage designed for the SeaChem Tidal line of filters. It is designed to be customized with OpenSCAD to fit your specific needs and contains 11 different parameters for you to tweak it to your…
Passend für Bestway Steel-Frame-Pools mit einem ovalen Stangenmaß von 47x32. Druckbar in PETG mit Support. Schichthöhe von 0.20mm ausreichend 3-4 Perimeterschichten Ferner benötigt man noch: 5x M8 Schrauben in geeigneter Länge 4x M8…
Pool skimmer basket replacement. Print instructions Category: Outdoor & Garden Summary Pool skimmer basket replacement. Print Settings Printer Brand: Prusa Printer: i3 MK3 </div> Rafts: Doesn't Matter Supports: Yes </div> Resolution: 0.2…
Based on surface skimmer by ArjitJangid ( https://www.thingiverse.com/thing:2879673 ) but redesigned from scratch with easier printing in mind. Added a mounting point for Eheim 727110 suction cups ( https://www.ebay.com/itm/190794265260…
The bolt of my Flowclear skimmer broke, so I needed a replacement. Not 100% copy of the original part, but it is perfect for this purpose. I recommend to use PETG or ABS. I used 0.2 layer height and 100% infill, but I think it should work…
Easy print , adapter two pieces. 3d view looks odd, but its positioned for easy printing, when assembly, turn one half around..
Main advantage - stable position of skimmer. Holder is designed for wall-thickness of 6mm / 8mm / 10mm / 12mm / 14mm No supports. Screws - 100% infill
Printed on Mk4 from PETG
This replaces the bottom plate with the fixed pump from the Summer Waves pool (Polygroup) SFX-Skimmers. With the new bottom plate you can mount a 38mm Intex outlet and attach a Intex filter very easily (1.5" Intex hoses). All changes can…
Oberflächenskimmer für Aquarium mit Schutz vor Einsaugen von Garnelen, Maschenweite 0,5mm. Das Rohr hat einen Aussendurchmesser von 17,5mm, der Skimmer ist 55mm im Durchmesser. Gedruckt habe ich in PLA mit 100% Infill, gedruckt mit Stütze…
This is a minor rework of https://www.printables.com/model/261610-skimmer-adapter-for-bestway-pools, with a bit narrower slide to fit better with my Flowclear skimmer. I recommend to use PETG or ABS, and I used 20% infill. It seems to be…
I needed an spacer to get the Intex skimmer level to my Bestway Pool. I printed this in PETG with “strength” preset (6 walls) and 20% cubic infill on A1.
Neustále děti ulamují klapku k skimmeru Mountfield bazénu. Tak si jí prostě tisknu. A při výplni 15% není potřeba molitan. Print instructions PLA nebo PET-G 15% výplň
I bought this pool skimmer from Amazon for my pool. This particular model is designed for use with Intex pools that have a through-the-wall, screw type pump port. Coleman pools, unfortunately, do not. This adapter is inserted into the…
Pool Skimmer Magnetkupplung Bestwaypool für ein Leichtes tauschen zwischen Skimmer und Poolbodensauger. Um nicht immer den Poolschlauch umständlich von dem Skimmeranschluss bei unserm Pool zu demontieren. Ist diese Magnetkupplung…
I was made it In Tinkercad, easily with the original and measuretool. Best when you Print it with ASA filament, but PET-G may also good for that reason. I was Print it on My MK3S+ With IKEA LACK coverage. For this size of model better…
New to 3d Modeling will upload a picture once I have a chance to 3d print it. Please feel free to comment if you have an ideas on how to make it better. Modeled using Fusion 360 just got bored and wanted to try and design an important…
Pool skimmer basket with top. Height 120mm Inside diameter 175mm Printed from PETG with 4 perimeters.
This is a fixation for bestway skimmers on oval pool frames like steel max pro
This is a replacement surface skimmer for the 17mm JARDLI Glass Lily Pipe. The original is made of acrylic and is very fragile. I designed the 3D printed version to print without supports, however a brim is encouraged. In addition to the…
Directs flow sideways instead of downwards. Fits snug over the bottom.
Winter is coming... there may be snow! But now you are ready. Print these old school inuit goggles to handle all the bad sun rays when in the wild to prevent snow blindness. :-P There are openings to put through a rubberband. The whole…
Skimmer / Filter out - Aquarium - 10.5mm diameter Print instructions Print vertically with all supports
This is the Summer Waves SFX SkimmerPlus Vacuum adapter. I also added a version that accepts an o-ring (size: R-15 recommended). Supports are only only needed on the EXTERIOR of the intake and are suggested on the main dome. Add support…
Le diamètre du haut du panier est de 225 mm donc vérifiez taille de votre plateau d'imprimante. Un fichier Gcode spécifique MK3/S/S+ et PETG permet d'imprimer la partie haute du panier (anneau tronqué pour tenir sur le plateau de la…
Printing done on an MK4S+: PETG 0.25mm layer height Outer brim of 5mm All other settings standard.
Síto pro zachytávání nečistot ve skimmeru bazénu Azuro Vario Print instructions Vytiskněte z PET-G s výplní mřížka 15% bez horních a spodních vrstev 3-4 perimetry
Wanted to hide skimmer screws, but there's no cheap shop nearby selling the cover. Also hate when there are water toys blocking skimmer flap, so I made cover for Hecht 30003 skimmer with grid (big enough for leafs). This grid will block…
20,30,40,50mm stand for your skimmer (OD 125mm and OD 165mm)
Do pobrania zewnętrzny filtr do odpieniacza białek, możesz wydrukować wszystko lub możesz użyć akrylowej rurki o rozmiarze Fi 100 mm jak ja, filtr wykonany dla węża powietrznego Fi 10 mm. Filtr można zastosować dla domowego ozonatora…
Do you have the betta pool skimmer? Does it get stuck on your sun ledge or first step? Then, this is the model for you
The bottom cap included with the skimmer directs outflow downward, which can disturb the substrate in shallow tanks. Swapping the bottom cap for this print redirects the skimmer's outflow forward (and to some extent, diagonally upward),…
We have a small intex frame pool for the kids. The skimmer is really good for cleaning the water surface. It collects a lot of dirt, insects, leaves, hair and other stuff that is floating around. The inner basket of the skimmer has quite…
Lid to be used when vacuuming your pool. I believe the measurements to be somewhat standard to most skimmers. It holds the following measurements: The disc: 170MM in diameter, 3mm thickness The connector: 70mm height, 30mm width at the…
I made some Lily Pipes for the Eheim Skim 350 so that the water jet is not so strong and you still have full surface cleaning power. As always, I have uploaded the Fusion360 files, Step files, and 3mf files. Please leave a Like or a Make!
I thought I have published it but apparently not - this is simple remix of Juwel Bioflow M filter GItter so that it can be used with skimmer. I have been using it for some time already - just beware that it might require small…
this is an easy to print replacement for the skimmer ring. printet in petg
Klapka skimmeru pro Moundfield bazény Azuro Skimmer flap for Moundfield pools Azuro
After over half a year of testing, numerous adjustments, and iterations - and probably stressing out my aquarium more than I should - I must admit that I'm a little proud to present a user-friendly, easy-to-print 2-in-1 aquarium overflow…
Mřížka která zabrání vplutí předmětů do skimmeru, mezery jsou dost velké aby se tam dostaly nečistoty
This is a skimmer for floating aquatic plants. The included STL is 8 prongs with a width of 37.5mm You can generate your own custom comb by editing the variables in this Onshape document .
Smarter Reefs 2 in 1 Auto Roller Mat / Auto Protein Skimmer upgraded Venturi and Snail guard, designed with +45* angles for easy printing, print in ABS or PETG to keep reef safe
Réparation de skimmer intex, la pièce est pleine
Replacement for the Hayward Skimmer Basket Handle. Modeled after the HSP 1082 N2 part. Use a 0.25mm nozzle for best results. I used 0.0625mm layer height. You could probably use a 0.4mm nozzle, but I wanted the best fit and replication…
This pool pole holder is meant to help you organize pool pole based accessories vertically on a deck pole. It has spaced out holders for 3 poles and fits tightly to a deck pole. Note Before Printing: Please measure your deck post and pole…
Someone asked in the comments of the original skimmer adapter (https://www.thingiverse.com/thing:3701193) for a right angle option. I liked the way matlen67 handled the problem of aiming the angled nozzle since you can't guarantee where a…
