Counting matching models…
Here is the model for Slappy Bear. Slappy is a good Friend of Barry, Just don't call him a Dummy. Just like his friend he seems to just want to be your friend too, do you have space for Slappy? maybe he can keep Barry Company. I hope you…
the well known infamous glove from slap battles is now usable in real life and you can play sb in real life now! (not made by me btw)
The HailSquid Sticker Slapper is a tool for sticker graffiti artists to slap their stickers in hard-to-reach places. Attach the sticker to the roller, extend the stick and slap it. Use the roller to smooth out and apply pressure. Parts…
Snap, slap, or flick your way into reloads!
A replacement fly swatter I designed when my cheapo swatters head shattered into several pieces after becoming stiff and brittle. I printed in Overture high speed 95A TPU at 100% infill. It should replace any fly swatter head with this…
Now that's the SMACK!
the slapsquatch v4 has a thicker stick
I am not the first to do this but figured I'd share anyway. I really wanted a slap switch for my WW Viper throttle so I got this cheap button from Amazon and printed some parts. I didn't bother with their software because it emits '2' by…
Bookmark with a sasquatch holding a hockey stick Please post pictures of any makes
Very simple chain stay protector, its heavy duty and should last a long time under the most extreme conditions. Just use zip ties to hold in place, I have provided 2 models, 1 is 250mm long and the other is 300mm, you can stretch and…
A new 3D figurine generated by AI, a Chibi Slappy (Goosebumps). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
print on its side so the layer lines are smooth on the ramps
The Salesman: Squid Game: Slap master A request from my son. He told me it just “sorta” looks like him. Failure!
MINI VIbraslap. HEAVILY IN PROGRESS, DOWNLOAD AT YOUR OWN RISK (it wont give you a virus)
When planning the button panel layout, I decided to add a panic button like the one on the Thrustmaster TQS. Since I had already printed all the parts before adding it, I designed it as a sliding part. For efficiency, it can also be…
Keep your pins safe while sowing with this magnetic pincushion! For assembly, you'll need: 1 slapbracelet (up to 3cm wide) 3 round magnets (10mm diameter, 2 or 3 mm thick) - If you have different magnet shapes or sizes, look at…
I took the clip on thing from cdsmakestuff The areodynamic part is from vindolin I took the valknut from https://www.thingiverse.com/thing:5444203 .12 layer height I also did a wash on it with black paint to make the valknut more pronouced
Hello everyone. I always struggled to keep my pens and stuff in one place, and I found those cup-style pen holders always fell over because things like rulers made it too top heavy. So, naturally, I designed my own. My "Pen Holder", or…
The big button you slap on the top of my Slap Chop cracked after only a few weeks of using it, so I designed a replacement part that's much more solid, and is also much easier to reassemble (since it has a built-in cone guiding the spring…
This model is a dedicated Nicolai Eboxx Slapper, it's ment to be printed in TPU and then thermoformed on to the chainstay using heat. It's designed around the QLF chainstay but should be compatible also with KLF models produced later. The…
Coming close to the end of year festive time, here's Slapper with a fun festive cosplay! This attaches onto Slapper in his alt mode, by notching onto the articulated claw bit on his back. And in this missiletoad mode, hang him up and get…
These files are part of my xBuddy cooling chimney: https://www.printables.com/model/1147850-xbuddy-cooling-chimney. In addition you also need to download @teslapunk's “link” and print it three times:…
You'll need a 1/4-20 x 12 heatset threaded insert No supports needed I printed in PETG but any filament will do
use your smoothest plate contact area is 0.2mm or 0.4mm thick, so adjust first layer to 0.2mm to print in single layer or double rotate the model so the 1st layer print lines are aligned with the wiping direction, in my case rotated 45…
A magnet to always remind you to add Slap Ya Mama seasoning to your food.
A replacement game insert for the 1982 card game Slapshot. https://boardgamegeek.com/boardgame/1705/slapshot I simply made the 3 ‘bin’s slightly bigger to accommodate my Mayday MDG-7044 sleeves.
A replacement game insert for the 1982 card game Slapshot. https://boardgamegeek.com/boardgame/1705/slapshot I simply made the 3 ‘bin’s slightly bigger to accommodate my Mayday MDG-7044 sleeves.
A new 3D figurine generated by AI, a Chibi Slappy (Goosebumps). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
the well known infamous glove from slap battles is now usable in real life and you can play sb in real life now! (not made by me btw)
You'll need a 1/4-20 x 12 heatset threaded insert No supports needed I printed in PETG but any filament will do
Here is the model for Slappy Bear. Slappy is a good Friend of Barry, Just don't call him a Dummy. Just like his friend he seems to just want to be your friend too, do you have space for Slappy? maybe he can keep Barry Company. I hope you…
I printed 9 on an Ender 3 with 10% infill to keep weight down. I used 3D Solutech Orange PLA for the authenticity.
This was designed for the D&D dice challenge! Dice tubes can hold up to 2 dice. Slot them into one of the middle holder's hexagonal holes and slap the end to shoot any dice out . To store and transport , first attach front cover to the…
Zaslepka na bocni naslapy u Fiatu. Zadani bylo rozmerove jasne, nevim ale k jakemu typu to ma presne byt.
A 1:87 model of concrete Stelcon slaps. These types of concrete slaps are often used as pavement for industrial puposes. I've made 4 variantes, a 2x2m variant with or without steel edge guard and a 2x1m variant with or without steel edge…
