315 models
Scandinavian Nativity Scene Blacksmith The Bible doesn't mention a blacksmith at the birth of Jesus, so why is he there, hammering away next to the shepherds and the Magi? 1. The Power of "Everyman" The Nativity scene tradition,…
Print approx. €5.98–€7.31 excl. taxPreliminary estimate for one variant
This is a 1x5x7 gridfinity bin to store the Hacksmith Mini-Saber . This is designed to store it with the switch face down without being touched to make it impossible to accidentally trigger. I recommend using mouse ears to prevent…
Print approx. €4.28–€5.23 excl. taxPreliminary estimate for one variant
hell divers 2
Bring authentic medieval craftsmanship to your tabletop with this detailed blacksmith forge scene. Featuring a large stone furnace with chimney stack, working firebox, lower storage compartment, and tiled stone base, this terrain piece…
Protective case for your Smith Blade Pro. - Protection from dirt and or splashes. - Scratch protection. - Customization.
I designed this rack to be screwed into the bottom of a shelf to save space compared to the original retail rack. The informational strips with the paint colors and barcodes must be cut down in order to fit on the front. Print 2 of each…
This is a holder to hold the Hacksmith Mini Saber. https://hacksmith.store/en-au/products/hacksmith-mini-saber I just use a bit of double sided tape to stick it to the wall so i can hang it up. Category: 3D Printing
Robert Murray-Smith, a brilliant chemist/engineering-physicist/YouTuber recently passed away as one of his biggest fans i wanted to honor his memory by remixing one of my favorites from his creations which he derived from otvinta. the…
I ordered an original “Hacksmith bottle opener” but i couldn't wait for it to arrive so i printed one but just for design reasons it doesn't work here you can buy the real one: https://hacksmith.store/collections/essentials/…
The original feet of this treadmill concentrate the weight in a very small area and easily wear holes in soft/foamy floor mats. This adapter is a snug fit around the original feet providing a greater area to spread the load thus leaving…
This is a Gridfinity bin designed to hold your Hacksmith Mini Saber Designed in tinkercad No Supports needed 2 walls 3 top/bottom 10% infill
!!! READ DESCRIPTION !!! General: This clip has only been tested on my XL model of the Code helmet so I cannot guarantee it will fit on smaller sizes. I recommend trying to print it anyways, STF files are included (normally) My clip is…
this is a hacksmith keychain logo fits nicely on a bag please like and add a make infil 25% resolution .2 no supports
A gridfinity hacksmith minisaber holder
A small spring clip repair to hold the housing in place
Organization station made to hold 2 x 2oz and 2 x 1oz Bob Smith Industries (BSI) CA glue bottles, 1 2oz BSI Insta-Set spray bottle, 4 long hex bits, and a pen/tool cup. I designed this since I really needed a way to keep these glue…
This stout pig artisan stands ready in his leather apron, stubby snout turned upward in a confident grin as he brandishes his hefty hammer. Every sculpted fold of his workshirt, every rivet on his apron’s belts and pouches, and the…
The original Major Fitness B52 did not include hooks to store the Smith Bar at a height that allowed users to avoid hitting their head. This model allows anyone to print and attach the hooks themselves. ** Warning: I have not tested these…
Protective case for your Smith Blade Pro. - Protection from dirt and or splashes. - Scratch protection. - Customization.
Desinged to be used with zip ties to mount the holder to the support pipes of the Shopsmith
I sculpted this in Nomad Sculpt on an iPad with reference images from the game!
This is a remix of Bertmag's remix of @LL77's gunsmith bench block, inspired by M*Carbo's gunsmith bench block. Added magnetic tray to hold small screws and springs ,etc. Uses four 15mm x 1.8mm disc magnets. Printed using 0.2mm Layer…
I bought the Hornady case activated powder drop attachment ( https://www.hornady.com/reloading/presses/lock-n-load-accessories/case-activated-powder-drop-powder-accessories#!/ ) hoping it would work with the Brass Smith dropper, it did…
!!! READ DESCRIPTION !!! General: This clip has only been tested on my XL model of the Code helmet so I cannot guarantee it will fit on smaller sizes. I recommend trying to print it anyways, STF files are included (normally) My clip is…
Bring authentic medieval craftsmanship to your tabletop with this detailed blacksmith forge scene. Featuring a large stone furnace with chimney stack, working firebox, lower storage compartment, and tiled stone base, this terrain piece…
This detailed blacksmith anvil and hammer set is a classic forge essential, perfect for workshop scenes and medieval-style environments. The sculpt captures the heavy steel body of the anvil with defined edges, hardy hole, horn tip, and…
Born from the forges of Bohemia, The Smithy brings the rugged craftsmanship of Kingdom Come II to your bathroom counter. This medieval forge-inspired razor holder is more than a stand — it's a display piece. Featuring a stone arch,…
This is my attempt at creating a set piece for a town in D&D. I'm sure it can be used in other RPGs. I have scaled this model to a 32 mm scale. I scaled this by the door size. It is currently around 38mm tall. To scale it, I would suggest…
Hey! 👋 This is the first release of GridSmith — a modular, snap-fit TTRPG terrain system designed to actually work at the table. Why GridSmith? I’ve printed and used a lot of terrain systems over the years, and kept running into the same…
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad This is a simple and lightweight dust cover or lid for the Lyman Brass Smith Powder Trickler, measuring 10mm tall in…
If you like my models and feel inclined, I could always use more filament for test prints. https://ko-fi.com/plaid_brad This is a replacement lid for the Lyman Brass Smith Powder Measure. The original is a soft plastic with an overly snug…
Introduction: I f you decide to learn to locksmith, ( and I suggest you don't ), you will likely encounter many small microscopic parts that attempt to dissappear into the ether right before your very eyes. They are there one minute, and…
Insert for Shopsmith cast iron bandsaw table. Slot to the right of center. If you need the slot to the left, simple mirror the 3MF left to right in your slicer. There are three small nubs on the outer rim for sizing. Sand or file for a…
Description This is a replacement clip to suit a Smith & Nephew Pico negative pressure wound therapy (NPWT) device. This model can be printed in whatever material you choose, however I printed this in ABS and it works well. Print…
This adapter allows connection of a 2.5" dust collection hose to the top of a Shopsmith Mark V 510, 520, or Mark 7 upper saw guard for overhead dust collection. Based on the concepts and ideas of William H Seward IV. Many thanks to…
I designed it to snap over the helmet itself which means it has to be pried open to fit into place. Consider your filament and wall count so that it doesn’t break. It takes a gentle but firm move to put it in place.
All 78 Cards converted to .stl files. unchanged they measure 37x65x1mm with 5min/2gram for 1 card all together the stack should stand at 8cm high. Use your cards wherever you want since they are waterproof when made from plastic :) The…
Bullsmith By: David Orlo The Bullsmith Story In the Skull King's army, there is one warrior whose appearance might fool the unwise—an imposing figure with massive bull horns and a fierce gaze that seems to pierce through lies. They call…
This is a modern decoration for movie lovers. 25% infill 0.2 layer height print upside down to get a nicer surface Like and visit my page if you like this!
Made this due to my robot vacuum constantly catching the wires to my speakers on speaker stands. I have since moved and now wall mount my speakers but this was super helpful in protecting my wires and speakers. This specifically works…
The model on this platform is discontinued. Head over to MakerWorld to have fully customizable version directly in your browser: https://makerworld.com/en/models/861173-locksmith-corner-holder-french-cleat-frenchfinity
This is an easy to attach chin mount for the Smith Mainline. It requires two small zip ties to secure it to the helmet. It was designed to give a wide range of positioning. The last two photos show the possible angles achieved by the…
A Gridfinity holder for a Bob Smith Industries Insta-Set 2oz (or any 35mm) bottle. Prevents the bottle from falling over and potentially spilling onto your bench. Has holes for either 6mmx2mm magnets or M3x6mm countersunk head screws…
I broke mine a tiny bit taking the supports off. There are some spots that build plate supports cant reach but its ok. Tree Supports on build plate only Powered by ITree Supports on build plate onlymage-to-3D from MakerWorld…
Simple holder for standard line of Bob Smith superglues for the hexagon storage wall (HSW).
hanging blade sign resembling a 3d printer and anvil with spool and caliper decorations. scaled to fit a ¾ pvc pipe (26.7 mm width cylinder).
You will need a snap to push this into. Also add supports please.
Blacksmith Anvil in 1:24 Playmobil Diorama Compatible scale & 1:12 Dollhouse scale. Printed in creality gray PLA. The 1:24 Playmobil Compatible scale anvil printed okay with no supports, but the larger 1:12 Dollhouse scale needed…
There were other models for other variants of the Bob Smith Industries glue, but not for the one I wanted. Now it exists! Store your 1oz BSI CA glue and 2oz insta-set in a 1x2 bin
Hello everyone, I found that all other GoPro mounts for the Smith Mainline full face helmet mounted the camera on the lower part of the chin, and the camera would sometimes hit my chest and be uncomfortable, so I made my own. All you need…
The A.O Smith Hybrid water heater is supposed to report the input ant output temperatures to the heat pump. I did not find it, but do look into this before printing this. The print will hold a SwitchBot outdoor thermometer close to the…
I dislike uploads of other peoples work, but I also hate using the thingiverse site, And for some reason this model isn't on the makers page there anyway. But since I have remixes to post, I'd prefer for reference sake to just link to…
Shelf to hold two Bob Smith Industries 2 oz Super glue (CLA) bottles on a honeycomb storage wall. Blender file included in case you want to create your own, edit it, etc.
Replacement ski goggle clip for Smith Mission helmet (Model#A100-L). Printed in PETG using tree supports to have layer lines flat when the clip is on the side. Fits quite well on second attempt, but likely can still be improved slightly…
just use bridgemode zo print it looks best in 0,12 Have fun
A mighty owl-man metal worker adventurer with natural stealth and night-vision. Collect them all! Check out the FULL COLLECTION HERE: https://www.printables.com/@TripleGWorkshop/collections/2198626 Designed to print with Tree Supports on…
I need to store Shopsmith items, Kreg clamps and C clamps on the wall for easy access. I printed on black PETG on side for more strength. Printer Settings: Wall lopes 6 Space fill density 45% Enabled support for bed Type: Tree(auto)…
N scale blacksmith. I scratch built the HO model, then drew up the N scale model. Building is in Coshocton, Ohio.
Oil holder for Shopsmith. I needed easy access to my tools and supplies. Printed in black PETG Picture shows direct part was printed Strength 3 wall loops Sparse density infill 20% No support.
I needed easy access to my tools. Printed in black PETG Picture shows direct part was printed Strength 3 wall loops Sparse density infill 20%
I designed a few simple roof pieces to complement the amazing blacksmith shop model created by Chris. To give the rooftops a more realistic asphalt-like texture, I printed them on a textured build plate. Sure, we could just cut some…
I needed a shorter mounting pole (11.5” long.) PERLESMITH Ceiling TV Mount https://a.co/d/4h8M3O8 Purchased this good monitor / TV mount and needed it shorter. Could not cleanly modify the original pole shorter, had to make my own.…
This lid is intended to fit the NokBox 8x8 TTRPG Dice Box found here: LINK Graphic recreated in Solidworks using the following as a reference: LINK I recommend printing it graphic side down on a textured build-plate using the “Only 1 wall…
The title says it all. This fits the medium duty series torch heads, as would be used in a torch handle such as MW5 or WH100 (e.g. MW205, MC509, etc). These caps help keep the ports clean and the o-rings undamaged when heads aren't…
I needed easy access to my Shopsmith tools. Printed in black PETG Picture shows direct part was printed Strength 3 wall loops Sparse density infill 20%
I needed easy access to my Shopsmith tools. Printed in black PETG Picture shows direct part was printed Strength 3 wall loops Sparse density infill 20% No support
I made a bust of Will Smith in the style of a cartoon character, I hope you like it. My print settings: PLA , 0.16mm layers, 10%gyroid, 2 perimeters, tree supports You can change the scale as you wish. Happy printing:)
The Smith Sphere is a purpose-designed contact staff head weighing depends on settings, precisely balanced for stable and consistent rolling. By placing more weight at the end of the staff, the mass shifts further from the axis of…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
Chin mounts for Smith Mainline helmet to gopro style camera mount. This was made from a scan of the helmet so the contour matches very well. I recommend printing these in PETG or ABS/ASA but I've been rocking a PLA one and it seems to…
I have always loved the mash ups of Peanuts comics with Smiths lyrics on This Charming Charlie and got the idea to create wall art of the comics.
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive…
Howdy, wonderful people! Multimaterial printing is great, but it really does have some downsides. Excessive extra print time and unreasonable material waste are realities that make us question whether the benefits are worth it. But…
This is a sharpening jig for the Shopsmith lathe chisel set. The intent of this is to replicate the functionality of the sharpening jig that has been discontinued. The sharpening guide allows you to sharpen the Shopsmith lathe chisel set…
This stout pig artisan stands ready in his leather apron, stubby snout turned upward in a confident grin as he brandishes his hefty hammer. Every sculpted fold of his workshirt, every rivet on his apron’s belts and pouches, and the…
Edit: I saw some people saying the file had some errors in Slic3r. I've uploaded a fixed file. Sorry for the troubles! :) Watch here: https://youtu.be/hX9XGU1L7OY Last time I asked if there were any fans of Rick and Morty out there. It…
This flip stop is designed to work with the Shopsmith 510 rip fence, 520 rip fence and the band saw fence. It allows you to easily make repeated cuts or drill consistently placed holes. The hardware below is easily obtained at any…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com, but I’ve already done the work of converting them into ready to print STL files, including…
A caricature of Elisabeth Sladen as Sarah Jayne Smith from Doctor Who (the 3rd doctor)
Many smith corona typewriters use a proprietary spool. I didnt want to buy one just to test a typewriter so I made one. Takes ½ in ribbon I used superglue to hold the bottom on.
The original Major Fitness B52 did not include hooks to store the Smith Bar at a height that allowed users to avoid hitting their head. This model allows anyone to print and attach the hooks themselves. ** Warning: I have not tested these…
External cooling fan for Century motor found in some Jandy and Jacuzzi pool pumps. The pump is about $1800, and the fan is a $20 part. My fan was broken and the pump was excellent (after rebuild) so I had a beautiful $1800 (plus tax)…
Combine your love for EDC and Storage into one. This is a custom cutout for your SmithBlade Lite to fit into the GridFinity system. Nothing fancy just a place to put your stuff. Recognition to Zach Freedman and the Hacksmith This file is…
Dark Warsmith Cutlass from the Dark Warsmith set in Sea of thieves.
dwarf blacksmith statue, sitting on a stone anvil with braided beard and runed hammer.
A dwarf mage with long beard glowing with carved runes, holding a floating stone tablet.
I have always loved the mash ups of Peanuts comics with Smiths lyrics on This Charming Charlie and got the idea to create wall art of the comics.
A gnome blacksmith with a hammer raised above an anvil, beard tied in braids. Solid one-piece statue, 3D printable with no fragile parts. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
A 3D printable dwarf blacksmith fused with his forge anvil, his beard braided into thick rope-like strands that anchor to the base. The model should be a single solid piece, highly detailed but structurally strong, with unusual design…
![Morty Smith [Rick and Morty]](https://media.printables.com/media/prints/13460/images/120259_6b834525-8214-485a-bfc3-0d77a0ccbd99/img_0425_13460.jpg)
