P
PrintablesSteve 3d
Watering Ring, sprinkler or soaker
Place it holes up for a sprinkler or holes down to use as a soaker. needs an O ring to fit hose adapters print with support on build plate
- Downloads
- 320
- Likes
- 134
- Rating
- 0
Search results: soak
45 models
P
Printablesjurassic73
Soaker Hose Spike/Keeper
Soaker hose spike to keep my soaker hoses in place. Designed a barb at the bottom to help keep in place. Printed using draft mode for .3mm layers(thicker layers are more durable), three perimeters, high end of PETG range for strength.
- Downloads
- 313
- Likes
- 117
- Rating
- 4.75
P
PrintablesEnceladus42
Soaker Hose Accessories
T Piece, Straight Adapter and a Blanking Cap for use with soaker hose (or possibly any hose!) with an ID of 12mm. I printed mine in PETG for a bit of added strength and heat resistance, but PLA could work. They should hold in with…
- Downloads
- 293
- Likes
- 42
- Rating
- 0
P
PrintablesNautiluStudios
MosSoaker - Sphagnum Moss Pole Water-Dripper
A simple water dripper for a stackable sphagnum moss pole. Sits in the inner diameter of the stacking part of the pole. Uses a series of small funnels to slowly feed water onto the top of the moss, which IDEALLY should allow the water to…
- Downloads
- 227
- Likes
- 38
- Rating
- 3
P
PrintablesSquirtle Plays
Aquifer - DIY Customizable Super Soaker
What is this? The Aquifer is an introduction into a new subset of 3d printed designs, water-guns! For a while now, Hasbro's offerings of Super-Soakers have been subpar, and I wanted to change that. I liked the idea of the water magazines…
- Downloads
- 187
- Likes
- 70
- Rating
- 0
P
PrintablesInnRaum³ / Makerspace Ried
Bassoon Reed Soaker
Tool to soak and store bassoon reeds.
- Downloads
- 169
- Likes
- 10
- Rating
- 0
P
PrintablesTali B
Soak-off Nail Polish Clip
A modified version of Arkatz's design found here ! I removed the need for supports since I dislike the rough finish they tend to leave 😅 I tried to smooth out the model a bit as well, but it was a quick mod since I was desperate to get my…
- Downloads
- 144
- Likes
- 27
- Rating
- 0
P
Printablesjurassic73
Soaker Hose - splice and end cap
This is a splice to repair a soaker hose. The inner diameter of my soaker hose was roughly 15 mm. This pushed in to place and did not leak. Time will tell. Also created an end cap. Printed in PETG with three perimeters on the higher end…
- Downloads
- 128
- Likes
- 16
- Rating
- 0
P
PrintablesDr.Print
Garden Hose Soaker/Watering Attachment
Garden hose attachment to reduce pressure while maintaining high flow. Fits standard garden hose threads (GHT)
- Downloads
- 123
- Likes
- 12
- Rating
- 5
P
PrintablesLazerlord
Soap Dish - No Soak
A quickly-modeled soap holder designed to keep the soap from sitting in a pool of water. It's especially useful if you have a bar of soap in the shower and want to keep it from dissolving away in to nothing. Print instructions Print it.…
- Downloads
- 109
- Likes
- 19
- Rating
- 5
P
PrintablesGemeneye
Super Soaker Shot Blast Inspired Buffer Tube Stock
Hello everyone! This is a 3D printed buffer tube stock that I have designed to closely resemble the Super Soaker Shot Blast stock. After finishing the Raider-style stock, it just didn’t seem right to not also do the Shot Blast stock.…
- Downloads
- 98
- Likes
- 43
- Rating
- 5
P
Printableskola41
Squishy Water Gun Bathtub Soaker
This fun Toy is printed out of TPU You fill it underwater and than spray in the bathtub with it Print settings: Remember to always dry your TPU Slow Speed 3 Walls 3 Top and Bottom Layers No cooling Fan for me because my TPU tents to warp…
- Downloads
- 94
- Likes
- 14
- Rating
- 0
P
PrintablesStrider Varun
Soaker Hose Retainer Spikes
My soaker hose kept bending away from where I wanted it thanks to the sun's heat, occasionally landing on my delicate seedlings, so I made these hooked soil spikes to hold it down. Now my soaker hose stays where I put it, and my seedlings…
- Downloads
- 85
- Likes
- 15
- Rating
- 5
P
Printablesbriand42956
Garden hose soaker attachment
I was watering my wife's raised vegetable garden while she was away and had a hard time getting a good volume of water without blowing the soil away. I needed something that would allow me to put a controllable volume of water into her…
- Downloads
- 73
- Likes
- 11
- Rating
- 5
P
PrintablesRi3del
Super Soaker Lever (stl, 3mf, STEP, f3d)
Ich habe 2 Versionen dieses Hebels hochgeladen. Eine Version für die originalen Schrauben und eine für M4 Schrauben. Eine M4 x 40mm Senkkopfschraube passt von der lange perfekt. Ihr braucht kein Supportmaterial für die Schraubenlöcher.…
- Downloads
- 71
- Likes
- 3
- Rating
- 0
P
Printables35°C0lDFuSi0n
POTV Glass soaker cleaner
Soak POTV glassware for Lobo. Use minimal amount of alcool. Print with more top layer to prevent leaking. Lobo station ThightVac Insert Pod Filler Scoop
- Downloads
- 65
- Likes
- 14
- Rating
- 5
P
Printableskehaliwoldemichael
G-code for X1C chamber heating and heat soak
Custom gcode to manage X1C chamber pre-heating and heat soak. By default, only active if chamber temperature is set above 30ºC. The code pauses the print after bed finishes pre-heating to allow time for the chamber to reach its target…
- Downloads
- 63
- Likes
- 15
- Rating
- 0
P
PrintablesMr.Ten
Soaker Hose Connection
Soaker Hose connection for your garden. It connects water hose to a Soaker (Sweat) hose. O-Ring can be purchased in a shop and salvaged from existing connection in your garden. I had plenty connections to take from. There are 3 models…
- Downloads
- 58
- Likes
- 7
- Rating
- 0
P
PrintablesGuybrush T.
Super Soaker Water Tank Cap
The kids lost the original screw-on cap so I made a quick press on tethered cap to fit a Nerf Super Soaker Barrage Soaker or similar water gun with a 40mm threaded fill neck. designed for super simple printing with a flexible filament.…
- Downloads
- 57
- Likes
- 3
- Rating
- 0
P
Printablesn2history
Retainer Travel Case — Screw-Top with Soak Base
This is a storage and soaking case for a clear retainer or aligner. It is not a sterilizer and it is not a medical device. Keep it clean, replace it periodically, and follow your orthodontist's guidance on retainer care. We've all been…
- Downloads
- 46
- Likes
- 2
- Rating
- 0
P
PrintablesCRracer712
Oreo Cookie Soaker
This is an Oreo Cookie Dunker. No more milky fingers, no more dry cookie! Works with regular Oreos and double stuff cookies. Actually it works with about any cookie…
- Downloads
- 41
- Likes
- 15
- Rating
- 0
P
PrintablesDavidSwiss
NERF Super Soaker Tank
NERF Super Soaker scatter blaster Mod Add an extra water tank to your NERF Super Soaker perfect for the Sommer. The Tank uses the existing Cab and is easy to Install and removable.…
- Downloads
- 41
- Likes
- 13
- Rating
- 0
P
PrintablesRoss
PID Annealing Oven with Programmable Ramp & Soak Functions
This allows you to take the easy to find & affordable Chinese Lab oven and convert it over to a controller that has programmable ramp & soak features all for about $550 (including the lab oven cost of ~$400). I use this to anneal PPS-CF,…
- Downloads
- 39
- Likes
- 44
- Rating
- 5
P
Printablesphillycheeseman
Soaker Hose Connector
Used to connect two soaker hoses together. Use Hose Clamps as usual.
- Downloads
- 36
- Likes
- 4
- Rating
- 0
P
PrintablesL
Super Soaker Garden Hose Adaptor
I found my old SuperSoaker SwitchShot in the Basement and enjoyed it again during the Heatwave. Only one issue, the watertank that I have only contains ~500ml of water. Since i am always close to a garden hose anyways i made this adaptor…
- Downloads
- 35
- Likes
- 14
- Rating
- 0
P
PrintablesScott Perowitz
Soaker Hose Restrictor Washer
Upon receiving my 150 foot lengths of soaker hoses, that I cut into 50 foot lenghts, I realized I only had a single soaker hose restrictor washer! A couple web searches later I realized it was not an easy thing to find for an economical…
- Downloads
- 33
- Likes
- 9
- Rating
- 0
P
PrintablesVincent
0.5in OD Soaker Hose Union Fitting
Soaker hose often break which makes them impossible to use unless you crimp another fitting onto. This fitting has small features on the ID that allows to slide in the damaged soaker hose and retain it. The retention is good enough for…
- Downloads
- 32
- Likes
- 1
- Rating
- 0
P
PrintablesDrGreenthumb18
1/2in Soaker Hose Connector
It should fit in a ½ inch soaker hose or any other low pressure hose. It is not intended to be used for anything high pressure. To use it make sure the ends of the hose you want to attach are cut cleanly and push the connecter into either…
- Downloads
- 26
- Likes
- 3
- Rating
- 0
P
Printablesplasmata
Toe Soaker
I had a friend that was complaining about soaking her toes and having to use too much solution and it making a mess everywhere. This tool conserves solution and allows just the toes to dip in.
- Downloads
- 26
- Likes
- 1
- Rating
- 0
P
PrintablesDouglas Hale
Delta Ara faucet descaling soaking tray
Attach to the faucet with rubber band during soaking. I have used with regular vinegar and had good results. This was designed for these faucets: Delta Faucet Ara Single Hole Bathroom Faucet Brushed Nickel, Single Handle Bathroom Faucet,…
- Downloads
- 23
- Likes
- 3
- Rating
- 0
P
Printablesthe3Dguy
Reed Soaker for Clarinet and Saxophone
Soak your reeds with this easy model. Even you have bridges, you don't need supports, because they would be really hard to remove. Print it with as much infill as you want, I would recommend 15-30 %.
- Downloads
- 19
- Likes
- 4
- Rating
- 0
P
PrintablesPepijn van Vliet
Sip.. Soak... Relax.... Hottub sign
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ GST3D Black Transmission Distance: 0.3 PLA+ GST3D BROWN Transmission Distance: 2 PLA+ GST3D BLUE Transmission Distance: 3.5 PLA+ GST3D…
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
Printablesjnatz
Replacement Trigger for Super Soaker XXP175 Abzug
Trigger for a Super Soaker XXP175
- Downloads
- 14
- Likes
- 3
- Rating
- 0
P
PrintablesJC
Bracket for fabric soaker hoses
Use this bracket to repair a fabric soaker hose. You'll need to either design and print the joining tube or *gasp* buy it at your local hardware store. Use #8 screw and nuts. Slice with at least 30% infill. Print using a strong filament…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
Printablescottec
DE-Soaker - Espresso Puck press 58mm
Tool for de-soaking your puck if the parameters haven't been optimal. Use it to press out excess water through a puck screen. Fitting 58mm Baskets
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesScott Perowitz
Soaker Hose Ring Holder Guide
Is a simple guide that will hold a soaker hose in place around plants, I specifically use it for my Dills Atlantic Giant Pumpkins as they require a fair bit of water and can be easily damaged.
- Downloads
- 9
- Likes
- 10
- Rating
- 0
P
PrintablesFanasia Lab
Eversoak - Planter
You live life. We keep it alive. Slicer settings Use your favorite settings except for the tank and saucers , 3mf files are provided to show how to modify the settings of those two. About the design For those who craving greenery but lack…
- Downloads
- 8
- Likes
- 10
- Rating
- 0
P
PrintablesBC
Garden hose diffuser/soaker with ground spike
This diffuser acts as a water pressure dampener to slow down the flow from high pressure water lines (I tested with 80 psi and it holds up well). The detachable ground spike is more fragile than I would have liked but ended up including…
- Downloads
- 6
- Likes
- 4
- Rating
- 0
P
PrintablesMiloslav Brožek
Utensil Rest — spoon / ladle / spatula rest with a deep drip bowl, anti-soak ribs and a raised handle saddle
Utensil Rest — Drip Bowl + Handle Saddle The stirring spoon has to go somewhere. Put it on the counter and the counter gets a stripe; put it in a flat spoon rest and the handle still lands in the sauce that ran off it. This one separates…
- Downloads
- 6
- Likes
- 2
- Rating
- 0
P
Printablesec28
PanBuddy - Large Pan Soaking/Washing Assistant for Double-Basin Sink
I have always been tired of not being able to let pans too large to lay in the bottom of my sink soak, and having to fight to hold them in place while I scrub them. I would always try to balance them flat on the rib of the sink, or hold…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesTom
Stackable Grill Grate Spacers for Easy Cleaning & Soaking
These spacers are designed to stack multiple grill grates inside a cleaning box or container while keeping proper distance between them. They prevent large contact areas, allowing water and cleaning solution to reach all surfaces evenly…
- Downloads
- 2
- Likes
- 2
- Rating
- 0
P
PrintablesKrotek-inc
Fantasy Cosplay Bloodsoaked Great Axe Baldurs Gate 3
____________________THIS IS A DIGITAL PRODUCT, STL FILES FOR 3D PRINTING_________________________________________NON-REFUNDABLE_______________________ Files to print Bloodsoaked Great Axe from Baldurs Gate 3. The supports required. Some…
- Likes
- 11
- Rating
- 0