Counting matching models…
Hello! This is a dual port compensator for WE Tech / SOCOM Gear 1911 Airsoft pistols. This compensator replaces the factory barrel bushing which allows the barrel to slide through the compensator, as well as sit flush with the slide. I…
Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…
The Halo series, developed by Bungie, holds a special place in my heart. Halo was one of the first games I got on console when I was younger, and I’d followed the series and many of the books for far longer than I’d stuck with most…
Convert your Gen 3 PMAG into a 458 SOCOM* mag Replacement follower for Magpul Gen M3 Pmag in 458SOCOM. Modeled in Blender, I included the .blend file. PLEASE NOTE: *This follower will only support cartridge overall length of 2.120 inches.…
458 Socom Follower for Magpul Gen M3 PMAG. REQUIRES MAGAZINE MODIFICATION -SEE PHOTOS. This follower is designed to retain the anti-rock nature of the PMAG while allowing for full length 458 SOCOM cartridges. The internal rib inside the…
Hello Everyone! This is the “Super Socore 50”, an HPA blaster I designed that is Talon magazine compatible and powered by a Supercore. All of the other Supercore powered blasters I have seen are designed for practicality in a competitive…
To replace the original plug that often melts but also for more readily available anderson connectors (50A) Category: Tools
Ok, so this took me a while to get right and still mistakes were made and let me warn you, it is a bit tricky to put together but I did have fun with it and so I hope you do too. Version 1 can be found on my Patreon (link below,…
.458 SOCOM stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
This plug was designed specifically for my Super SOCO TC but should fit most frames with holes nearing 20mm. I am still in the process of testing this design but so far, everything looks promising! Please DM or comment if I need to make…
I designed this Socorex ACURA 825 Micropipette holder for our drybox in the Lab. The holder attaches to the metal shelves in our box, and are held in place additionally via two 10x2 mm disc magnets that is glued in. Excuse the terrible…
Model made with reference to Soco! Mascot of the couple of friends who travel through South America and show a little about their experiences along the way on the YouTube channel and Instagram @nossavisaodomundo Modelo feito com a…
Tired of accidentally pressing buttons on your key fob? I kept bumping my fob while riding, so I designed this little cover to help prevent those unintentional presses. It slips on snug and adds a layer of protection without getting in…
.458 SOCOM Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your regular…
I created this material efficient reloading tray for 50 cases .458 Socom. It holds 50 rounds in a staggered 5x10 pattern. The filament needed is less than 50 grams and printing time in 0.30mm DRAFT setting is less than 3 hours.
Modeled a quick suppressor nerf toy. Has internal ports and baffling. Print muzzle-down with no supports.
RECOMMENDED SETTINGS: 3 wall layers 25% infill no supports needed
A multiboard Surefire RC2 holder that uses either two normal Multiconnect attachment points or one Anti-Rotate Multiconnect remix attachments that I designed. https://www.printables.com/model/790060-anti-rotate-multiconnect Made to fit…
Hi there, Here is an airsoft suppressor (150 x 40 mm) with an M14x1 LH (left-hand) thread. It fits any airsoft gun. It features the standard M14x1 left-hand thread found on all types of airsoft barrels. It fits perfectly and holds…
20 round case for .458. Top and bottom prints for less than 40g of filament Print with a .4 nozzle .45 walls .2 layer height no support
To install this mount you need: 3 M6 (m5 for standart version) bolts and nuts, length about 20-25mm. Remove seat lower bottom plate (few screws) Put mount to fit plate and fixate with hands or clamp drill 3 holes for bolts install plate…
Bought this cheap Solofish SL-1091 off Amazon ($25ish) and wanted to make it into the LAAM for obvious reasons. I'm probably gonna put it on with velcro so it's removable. The charge port is accessible but the laser adjustment and…
The cover and cable gland were printed from ABS-cf, the seal from TPU
I printed it with PETG, but other materials would work too. Moderate fit as is. Does not fall out but from time to time needs to be pushed in a bit. Definitely would be better of putting in some glue to secure it if you want to have it…
A 20 round reloading tray for .458 SOCOM. Only 23gr of filament. Print using a .4 nozzle .2 layer height .45 wall width or Arachne if different may work no supports
I reload many calibers and bought a Frankford arsenal bullet seater. I realized there was no inner sleeve for a 458 socom nor a push rod that would work properly witht eh .458 socom. So i created this little gem.
The source marked this model as adult content.
🔗 https://www.patreon.com/c/toadstoolweaver Most of my files are FREE, thanks to the incredible support of my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking some nice extras: ✨ Early access…
Prints without support. TPU.
I'm using the Super Soco CPx for a few years and i use this protector for my charger for a long time (as you can see on the pictures). I made it because i use the charger on a concrete floor and when the aluminium is damaged it gets…
Summary This holder goes into the steering fork middle rod. Replaceing the original, dustcup. You can insert a 43mm Clock Print Settings Printer: CraftBot FLOW IDEX XL Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament brand:…
A nice tool to push back the pistons in the front caliper (LBN brand) of a Super Soco CPx (model year 2025) much easier! Print the tool and use a small clamp to push back the pistons and install some new brake pads. My advice: clean de…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This is a replacement for the original plug that is so soft it easily breaks after a while. Best printed in flexible material. Category: Replacement Parts
RECOMMENDED SETTINGS: 3 wall layers 25% infill no supports needed
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
A basic model of the Socom pistol from the videogame Halo ODST made by commission this includes both a version with no text and one with simplified engraved text
This part is designed to protect the battery connector on the 60V 45Ah battery on the Super Soco CPx model. The seat is eventually touching the connector and wil wear it out over time. I hope this wil protect the connection. I printed…
This is a replacement for the original plug that is so soft it easily breaks after a while. Best printed in flexible material. Category: Replacement Parts
This is a simple charger/plug holder for a Super Soco charger like the one in the last image. It allows to store the cables a bit neater and prevents them from dangling from wherever the charger is mounted.
3D model description This Model is inspired by the SureFire SOCOM556-MINI 2 Has an inner 24mm CW thread to screw onto DINOPRODUCTIONS flash hiders Dimensions: - Length: 122MM - Widest Diameter: 38mm 3D printing settings My advice so you…
3D model description This Model is inspired by the Surefire SOCOM556-MINI MONSTER Has an inner 24mm CW thread to screw onto DINOPRODUCTIONS flash hiders Dimensions: - Length: 126mm - Widest Diameter: 43mm 3D printing settings My advice so…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
im lazy and dont know what to write here rn… use 3.5 mm rods (i used cut down screws with 3.5 diameter) the hole for wire 7mm Ø
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in my Ammo Boxes Collection…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Double Snap Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/519398 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
