AIRSOFT- Halo M6C Socom kit for AAP01
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
M6C Socom conversion kit for AAP01 pistols based on the suppressed magnum from Halo ODST. I made this kit specifically because I had one single issue with the other M6C kits on the market- they require too many extra nuts and screws to attach to their respective platforms.
My goal for this project was to eliminate as many extra nuts and bolts as possible while still keeping a functional and aesthetic model. This kit reuses all the screws that come with the AAP01 and only requires one extra M5x16 screw.
The suppressor/front end replaces the AAP01 outer barrel. The rear iron sights are replaced with a guide rail and bolt retention tab for the slide. The handguard friction fits into a notch on the bottom of the suppressor and clips onto the cutouts on the bottom of the grip. The bottom of the suppressor also has a cutout for the outer barrel rail that comes with the AAP01.
The tracer variant of the suppressor supports tracers 28mm or less in diameter and 54mm or less in length. Tracers such as the Bifrost M and UVT-106 work best. The Brighter C will fit but the tracer will protrude from the suppressor.
Installation instructions-
https://bit.ly/m6c_aap01_install