Counting matching models…
Surefire SOCOM 2 Series (14x1 CCW) made in Fusion 360 This is not an “exact” replica of the Surefire SOCOM Series, I found a few on thingiverse but they don't print very nice, and need support. So I decided to make one myself (for airsoft…
Hello! This is a dual port compensator for WE Tech / SOCOM Gear 1911 Airsoft pistols. This compensator replaces the factory barrel bushing which allows the barrel to slide through the compensator, as well as sit flush with the slide. I…
The Halo series, developed by Bungie, holds a special place in my heart. Halo was one of the first games I got on console when I was younger, and I’d followed the series and many of the books for far longer than I’d stuck with most…
Convert your Gen 3 PMAG into a 458 SOCOM* mag Replacement follower for Magpul Gen M3 Pmag in 458SOCOM. Modeled in Blender, I included the .blend file. PLEASE NOTE: *This follower will only support cartridge overall length of 2.120 inches.…
458 Socom Follower for Magpul Gen M3 PMAG. REQUIRES MAGAZINE MODIFICATION -SEE PHOTOS. This follower is designed to retain the anti-rock nature of the PMAG while allowing for full length 458 SOCOM cartridges. The internal rib inside the…
Ok, so this took me a while to get right and still mistakes were made and let me warn you, it is a bit tricky to put together but I did have fun with it and so I hope you do too. Version 1 can be found on my Patreon (link below,…
.458 SOCOM stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
.458 SOCOM Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your regular…
I created this material efficient reloading tray for 50 cases .458 Socom. It holds 50 rounds in a staggered 5x10 pattern. The filament needed is less than 50 grams and printing time in 0.30mm DRAFT setting is less than 3 hours.
Modeled a quick suppressor nerf toy. Has internal ports and baffling. Print muzzle-down with no supports.
RECOMMENDED SETTINGS: 3 wall layers 25% infill no supports needed
A multiboard Surefire RC2 holder that uses either two normal Multiconnect attachment points or one Anti-Rotate Multiconnect remix attachments that I designed. https://www.printables.com/model/790060-anti-rotate-multiconnect Made to fit…
Hi there, Here is an airsoft suppressor (150 x 40 mm) with an M14x1 LH (left-hand) thread. It fits any airsoft gun. It features the standard M14x1 left-hand thread found on all types of airsoft barrels. It fits perfectly and holds…
Bought this cheap Solofish SL-1091 off Amazon ($25ish) and wanted to make it into the LAAM for obvious reasons. I'm probably gonna put it on with velcro so it's removable. The charge port is accessible but the laser adjustment and…
A 20 round reloading tray for .458 SOCOM. Only 23gr of filament. Print using a .4 nozzle .2 layer height .45 wall width or Arachne if different may work no supports
I reload many calibers and bought a Frankford arsenal bullet seater. I realized there was no inner sleeve for a 458 socom nor a push rod that would work properly witht eh .458 socom. So i created this little gem.
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
RECOMMENDED SETTINGS: 3 wall layers 25% infill no supports needed
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
20 round case for .458. Top and bottom prints for less than 40g of filament Print with a .4 nozzle .45 walls .2 layer height no support
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
A basic model of the Socom pistol from the videogame Halo ODST made by commission this includes both a version with no text and one with simplified engraved text
M6C Socom conversion kit for AAP01 pistols based on the suppressed magnum from Halo ODST. I made this kit specifically because I had one single issue with the other M6C kits on the market- they require too many extra nuts and screws to…
3D model description This Model is inspired by the SureFire SOCOM556-MINI 2 Has an inner 24mm CW thread to screw onto DINOPRODUCTIONS flash hiders Dimensions: - Length: 122MM - Widest Diameter: 38mm 3D printing settings My advice so you…
3D model description This Model is inspired by the Surefire SOCOM556-MINI MONSTER Has an inner 24mm CW thread to screw onto DINOPRODUCTIONS flash hiders Dimensions: - Length: 126mm - Widest Diameter: 43mm 3D printing settings My advice so…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Double Snap Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/519398 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
