43 models
Edited for SODIMM compablility with DDR4 & 5 This model is made to hold 15 DIMM and 6 SODIMM sticks in an old smartphone box (Samsung A5). It can also be used as a standalone organizer or edited using the provided STEP file to suit your…
Print approx. €2.18–€2.66 excl. taxPreliminary estimate for one variant
A simple stackable tray for storing DIMM/SODIMM computer memory modules.
The case comes in 2 versions Small - fits 2-3 RAM sticks (depending on the thickness) Large - fits 4-6 RAM sticks The bottom piece differs for both versions while the top one stays the same. Compatibility SO-DIMM Generation Version to use…
Holder for 15 SODIMM DDR RAM modules Print: Walls: 2 Top: 2 Bottom: 2 Infill: 10% ------------------------------------------------------- Halter für 26 DDR-RAM Module Druck: Walls: 2 Top: 2 Bottom: 2 Infill: 10%
Simple 30 slots bin for Gridfinity system to hold laptop ram (SO-DIMM), tested with DDR3, DDR4, DDR5 Re-upload from MakerWorld all credit goes to Dr. Chaos
A small box for storing SODIMM RAM modules. Stores up to 15 sticks and has a cover that slides in.
Stackable Tray for DIMM and SODIMM Memory, inspired by https://www.printables.com/model/161967-ram-sodimm-dimm-tray Update: added an (untested) DDR4 version as DDR4 SODIMM is about 2mm longer than DDR3. DIMMs fit in both.
This storage box can take up standard 2.5" HDDs, SSDs, SODIMM RAM and regular ram. The print is pretty tolerant, use whatever settings you see fit. I recommend between .3 to .4mm layer height and a layer thickness of about .4 to .5mm.…
26700 (2670) cell holder / cap / clip for Lithium ion and Sodium ion (Li-ion Na-ion) batteries!
It's a protection case for laptop RAM's. Compatible with all sodimm RAM's ddr5, ddr4, ddr3 etc. It's a print-in-place model with hinge lid.
I remixed this design to address three issues: It wasn't big enough for DDR4 laptop memory The lid was 2.1mm off the surface which made it harder to print The lid was too small so it was impossible to get it off Hope this helps!
I was having a lot of RAM modules in a bags and it was just a mess, so I created a simple box with two locks over modules, so I can store them without worrying, they fell out. It works with SODIMM DDR2 and DDR3 modules (not tested DDR1…
This box fits up to four DIMM ram modules. This also includes a lid, which I didn't print. Remixed from https://www.thingiverse.com/thing:4824502
Simple bin to hold my spare SODIMM modules. Currently being used with DDR3 and DDR4, but should fit DDR5 as well.
Simple DDR4 SODIMM RAM holder. Slots: x1 (for test) or x6 (full) Designed in TinkerCad btw.
Aluminum hopper used to haul Sodium Chlorate for the Paper Industry. You will need: 12 pieces of 1/8" metal rod about 1" long. 1.2mm brass for grab irons 16 1/4" long piece of aluminum bar stock (Hillman #11288 #11289) Optional 12 pieces…
Tray for laptop RAM I've made for work. It's designed for DDR4, but DDR3 fits as well (it's a bit of a looser fit). It's designed to be easy to read the label without taking each stick, and easy to take out when needed.
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Bugsnax inspired, Sodie, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
I created this small box to hold some SODIMM modules while refurbishing old laptops.
A very basic model of SODIMM DDR3. Hopefully someone might find it useful. The model is 1mm thick - which is roughly the thickness of the RAM PCB. Keep in mind the actual RAM has chips on it, making it 2-4 mm.
Just a two part holder for selling my SODIMM RAM
Printed with PETG, some settings might be bad on my end, have had the printer for a few days. All 6 dimms sit snug and are hard to move left-right. Print time was 40 min - Bambulab A1 - Generic PETG Preset
Once again, the title says it all. Hold your useless collection of old DDR3 laptop style memory.
Many buildings still have emergency lights powered by a 6v 4.5ah lead acid battery. They go dead every few years and I've decided to start building sodium-ion battery replacements, using 2-series LiFePo4 BMS circuits for the two…
This is a remix of the DDR3/4 storage box to fit the width of an Akro-Mils drawer with tabs to fit into the divider slot so it doesn't move around when opening and closing.
Customized version of https://www.thingiverse.com/thing:4079231 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=4079231 Instructions Using the following options: elem_name = Sodium elem_number = 11…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
I thought it would be good to have a few "base" parts for further development of holders for the Bricoman/Tecnomat pegboard, so I remixed a part, and created these configurations: single peg, horizontal base 2 pegs, horizontal base 3…
Initially this was meant as a replacement bottle cap for a Qualiphar NaHCO3 bottle. However, this cap can in reality suit most bottles due to its parametric design. --- Erratum (08/04/26): Addition of a Bambu Lab 3mf file (print profile)
(glue is needed for assembly) Good for a mini Parking lot stuff LEDs--> EBOOT 100 Pcs Clear LED Light Emitting Diodes Bulb LED Lamp, 5 mm (5 Colors): Amazon.com : Industrial & Scientific get the led pack with the orange ones
I made this model because I didn't like how to original didn't account for heat spreaders and had too many slots resulting in sticks falling in unevenly. So the main additions are: Reduced the number of slots to 10 instead of original 19…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
These are a simple redesign of grills for the Elipson 1813 speakers. I wasn't able to find images of the back side of the originals, so these are an estimation from looking at photos online of the fronts. They might work with other models…
This is a remix of the DDR3/4 storage box to fit the width of an Akro-Mils drawer with tabs to fit into the divider slot so it doesn't move around when opening and closing.
Once again, the title says it all. Hold your useless collection of old DDR3 laptop style memory.
I made this model because I didn't like how to original didn't account for heat spreaders and had too many slots resulting in sticks falling in unevenly. So the main additions are: Reduced the number of slots to 10 instead of original 19…
Aluminum hopper used to haul Sodium Chlorate for the Paper Industry. You will need: 12 pieces of 1/8" metal rod about 1" long. 1.2mm brass for grab irons 16 1/4" long piece of aluminum bar stock (Hillman #11288 #11289) Optional 12 pieces…
The case comes in 2 versions Small - fits 2-3 RAM sticks (depending on the thickness) Large - fits 4-6 RAM sticks The bottom piece differs for both versions while the top one stays the same. Compatibility SO-DIMM Generation Version to use…
Initially this was meant as a replacement bottle cap for a Qualiphar NaHCO3 bottle. However, this cap can in reality suit most bottles due to its parametric design. --- Erratum (08/04/26): Addition of a Bambu Lab 3mf file (print profile)
