Ahsoka - Star Wars Pot Plant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
- Downloads
- 199
- Likes
- 80
- Rating
- 5
286 models
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Ptah Sokar Osiris The model depicts a combination of the deities Ptah, Sokar, and Osiris. This amalgamation has been recognized since the Middle Kingdom period. During the New Kingdom era, these composite figures became increasingly…
Držák nebo klip soklu k noze s průměrem 50 mm
Here is my version of Ahsoka Tano's lightsabers from her live action debut in Star Wars The Mandalorian. These were based on reference photos of behind the scenes props and screen captures. The colors are interesting--the offhand body is…
if you like this kind of stuff consider supporting me on my Patreon www.patreon.com/wekster
Also remixed to multicolour remix for MMU. Subscribe Now! A very good model from LSMiniatures. Remixed to support free to do timelapse. https://www.youtube.com/watch?v=3NDJFnoX\_3g Subscribe to find out more support free 4K Time-lapse…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
Features: Supportless printing: No need for additional supports. Snap Assembly: Easily assemble the model without glue. Spinning Domes: Enjoy the functionality of three spinning domes, just like in the series. What's Included: 1 Sphere…
NOTE: If you have trouble with pins use file horizontal pins v4. 0.1 to 0.2 layer height Support Free Infill 4-15 % You will find a roman numeral on each plate so that you know how they are placed: I, II, III. Category: Puzzles
The files labeled (1)-(4) is the model split up to print the curves better and have no supports. each of the four files need to be printed once normal and once mirrored in order to make a full prop. When assembling you will need 3 of the…
This is a collapsible lightsaber hilt. This is Ahsoka Tano's original lightsaber from Star wars The Clone wars TV show. There is no painting or hardware required. You will need 4 different colors of filament if you're going to get away…
A multi-piece print for Hisoka (from the Hunter X Hunter anime/manga series). The print is broken into different pieces that can be printed in colour (if you have the colours, or would like to use your own pallet). I find even if you only…
Printed by MMU2S Subscribe Now! A very good model from LSMiniatures. Further remixed to multicolour and support free to do timelapse. Good to slice with PrusaSlicer. Single Colour Timelapse: https://www.youtube.com/watch?v=3NDJFnoX\_3g…
If you like this kind of stuff please check my patreon page www.patreon.com/wekster
100% untested. This was me challenging myself to make armour in fusion as helmets are more my thing. You might use it all , you might not. You might you some bits and not others. You might use it for custom builds. All good with me. The…
Titanic/Britannic/Olimpic na kľúče - prívesok
GLUE REQUIRED! NO SUPPORTS OR SANDING NEEDED! Currently, I think this is the best model of Sokka’s Boomerang available here. (At least for print beds the size of the MK3 or MK4). If you want a dual color print but don’t have a dual color…
As the new series Ahsoka started i printed his sabers but i wanted the series logo on the plate so i made one :) enjoy! I uploaded the step file too, if u wanna make a change in it! it fits perfectly in the hole of the stand! Thnak you…
"I'm no Jedi" Ahsoka Tano is a prominent character in the Star Wars universe, known for her role as a Jedi apprentice in the Clone Wars and her subsequent journey as a skilled and independent Force user. She's a fan-favorite character…
This saber is giant, a whopping 14 inches. If you think its to big just look at how it looks with Baylan holding it, looks like a standard lightsaber size till you realizes his hands are insanely huge(his body in general is massive).…
Ahsoka Tano's lightsabers from Rebels! Both of them! The main body of the primary saber is both split into two parts as "Main Body Upper and Main Body Lower" and unsplit "Full Main Body" All of the STLs are in the orientation I printed…
Ahsoka Tano's Lightsabers from the Star Wars: Clone Wars animated series! Be sure to print 2 tabs for the main hilt. All of the STLs are in the orientation I printed them. Personally, I printed the tabs of the main saber and the Outer…
Thanks original designers for great design, this helped me save a lot of time to create a free model for all Star Wars fans! Easy to print ! Supportless Print Settings Rafts: No Supports: No Category: People
Na značky! 3D model krabičky náleží kartám. Tisk karet na A4. Krabičku doporučuji zevnitř podlepit červeným/bílým papírem - vynikne tak průchozí nápis. Materiál doporučuji PLA bílé/červené - aby vznikl červenobílý kontrast nápisu.
Ahsoka Tano - Star Wars https://linktr.ee/blenkhorn3d See my Linktree link above for shortcuts to the following: 3D Model Request Form Patreon Exclusive Models Instagram More!
Revamped for better printability and assembly. separated blade and handle (they now connect with a tang like a real sword) added varaiations of the print for different sized printers The files are organized by various printer sizes. Print…
Here's my attempt at Ahsoka's Lightsabers from The Clone Wars. I scaled them up to 200%. You might want to sand the connection points so they fit if your tolerances aren't perfect. I'll assembly and painting video for this soon. Be sure…
For support head, look at picture Cards is classic paper print, file included
Star Wars The Black Series Rebels Ahsoka Tano 6 inch Action Figure Stand with lightsaber storage I wanted a stand that was unusual. Ahsoka's lightsabers can detach, and I wanted to sometimes pose her with the hilts on her holders. This…
take a 1/4 in dowel, large one is 10 in. Category: Props
Ahsoka's new Lightsaber and Shoto (Mini) Saber as seen in Star Wars: Rebels and Ahsoka shows.
Embrace the legacy of a beloved Star Wars icon with the Ahsoka Tano Box Multicolor, a 3D printable tribute to the former Jedi Padawan turned rebel leader. This upgraded version of the original Tool box parametric model by Yanev now…
CZ: Jelikož u nás doma a v práci začala frčet móda řasokoulí, začali jsme vymýšlet pro ně blbosti a manželka přišla s tím, že chce pro řasokouli houpačku. Vznikl tedy extrémně jednoduchý design houpačky. Sedátko jsem zavěsil pomocí…
New addition to my modular lightsaber ! Ahsoka Tano lightsaber from Clone Wars Print instructions: No supports required Inner and outer body pieces should be printed with brim/additional adhesion Print core at 20%minimum, 40%+ recommended…
This model is compatible with the lego system.
Ahsoka's Clone Wars Era Lightsaber and Shoto (Mini) Saber as gifted to her by Anakin in the final season.
Sabine Wrens Light Saber Based on video from SDCC and the Ahsoka Tano Tv Series. Designed hollow so cheap amazon light saber could run through the middle so to have light and sound…
This model of Ahsoka's headband that she wears as an adult in the series Ahsoka can be printed without supports, if the front of the model is placed face-down. I printed it on a Bambu Lab P1P. The headband should be thin enough when…
Here is the model for Ahsoka Bear. Ahsoka Bear is a good Friend of Barry, and like her friend she seems to just want to be your friend too, do you have space for Ahsoka? maybe she can keep Barry Company. I hope you enjoy, Thanks Bugman If…
A new 3D figurine generated by AI, Ahsoka Tano Jedi bust, from Star Wars. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Ahsoka Tano Shot Glass Check out the rest of the series - In My Club. Yoda Shot Glass https://www.printables.com/model/839672-yoda-shot-glass Darth Vader Shot Glass https://www.printables.com/model/839431-darth-vader-shot-glass More to…
takes a 1/4 in dowel Category: Props
Hunter-X-Hunter-Character-Hisoka-WALL ART
Kabina opcjonalna do modelu: KOLZAM WM-10L TTscale 1:120
This is the basic geometry for the sphere that appears in Star Wars Ahsoka. It is based on a regural dodecahedron, a sphere, and lots of planes. First approach and fun model to crack on Fusion 360. Would love to make it work and full of…
A screen accurate version of Ahsoka main hilt. Internally is hollow so you can add weight in order to make it feel less toyish. The inner diameter is 23mm. The black part near the pommel you need to mask it with some tape to paint it,…
THIS IS A WORK IN PROGRESS. I haven't actually finished printing this and assembled it yet. I'll update models if any changes are needed. Don't attempt to print if you absolutely must have a 100% functional assembly on the first try. It…
Belt clip for the Ahsoka Tano's Lightsabers (Clone Wars) model by CaseStudyno8 . It uses the groove in the ‘small_button’ part close to the pommel. Be sure to reinforce it with plenty of glue as it will be holding the weight! I walked…
After completing the darksaber model, i wanted to try create more lightsaber hilts. so with the new Ahsoka show on its way, i felt it was perfect timing to try and make Ahsokas lightsabers. These models are very easy to print. I have also…
Wall mount pieces for Lego Star Wars set 75401 Ahsoka's Jedi Interceptor (2025) 2-piece set to mount Lego set to the wall. Wall mount is created in a way to show Ashoka's Jedi Interceptor in rotated and tilted down position, mainly as its…
This is a model for Sokka's machete that he uses in the desert and the swamp. There's a bladed side on front and back since, as far as I can tell, he's cut with both sides across the uses in the show. Print Settings Printer: Sovol 3…
This is a headphone stand with Asoka from Star Wars, it's a model that is fun and powerful at the same time. This headphone stand comes in 2 parts, the actual stand with the figure and then the headphones holder to slide onto it and can…
Star wars Black Series Rebels Ahsoka Tano rebels staff easy to print and assemble scaled to 1/12 by patreon.com/solidsolju
Added the Starwars Logo on the back of the ornament As this is a high detail model we recommend printing it in resin or Vertically if you FDM Print it.
Přibližný model příslušenství k soklové liště, kterou už nejspíš přestali prodávat v OBI. Podle vzoru jsem zkusil navrhnou potřebné prvky. Snad se někomu bude hodit. Podpory: ANO vrstva: 0,2mm materiál: PETG tisknuto na PRUSA MINI+
It's a pretty straight forward assembly process all of the pieces either screw together or pressure fit and may need a bit of glue. just follow the pictures. Enjoy
round medal - diameter 80mm motive - Sokol Print Settings Printer: Artillery Genius Pro Resolution: 0,2 Filament: Polaroid PLA gold Category: Sport & Outdoors
Ahsoka Tano in crouch position. Add your own base and lightsaber. Ha. Her Lekku (head tubes) are going through her skirt (sporran?). and her pocketed lightsaber looks like its melting. Ahn my attention to details is amiss
Increíble modelo 3D de Ahsoka Tano diseñado para impresión. Geometría limpia, detalles precisos en su armadura y sables. ¡Ideal para fans de Star Wars que buscan una pieza de alta calidad! Stunning Ahsoka Tano 3D model designed for…
A simple coin i made with Ahsoka Tano's logo
This is Ahsoka Tano's smaller lightsaber from clone wars season 7 that I designed in Fusion 360. I would recommend for the blades that you use PETG with no cooling to make the blades as strong as possible. As for the hilt, I used some…
This is a digital 3D printable model of Ahsoka Tano's Staff from Star Wars. Check our White Robe armor from the Ahsoka series! The download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are…
Bring the galaxy's most beloved Togruta warrior to life with this stunning 3D printable STL model that captures every detail of the legendary Jedi. This meticulously crafted figurine showcases Ahsoka in her iconic pose, featuring her…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ GST3D BLACK Transmission Distance: 4.6 PLA+ GST3D BLUE Transmission Distance: 3.5 PLA+ GST3D RED Transmission Distance: 3.5 PLA+ GST3D…
0.1 -0.2 layer 5-10 infill Horizontal Expansion recommended: -0.02 mm Use glue to join the three parts. Supports on eyes and legs recommended.
I could not find any Ahsoka themed plates for these shadow boxes so I crafted my own version. This is a mix of my own drawings mixed with various svg files around the net combined in tinkercad to make these plates. Some of the plates I…
These are the lightsabers used by former Jedi Ahsoka Tano during the time of the Clone Wars. Green throughout her time as a padawan but changed to blue by her master Anakin Skywalker after she left the order. This design requires supports…
Slightly modified to fit the Ahsoka's Disney Legacy Clone Wars lightsabers
I wanted a nice way to display my lightsabers I bought with my family while visiting Disney. Designed it so the lightsabers are arranged to have their buttons facing outward to turn them on easily. Left holder is for the longer of the…
Feeling inspired by the show I designed Ahsoka Tano's Lamp from S2/E5 of The Mandalorian. Illumination is achieved with a RGB panel mounted in main body (B). *Updates to follow.
Bring the galaxy's most beloved Togruta warrior to life with this stunning 3D printable STL model that captures every detail of this iconic character. This expertly crafted figurine showcases the elegant pose and distinctive features that…
Z důvodu pružnosti tištěno z PET-G.
This is a smoothed version of Ahsoka Tano scaled for star wars legion. Incuded a version with supports for sla printing. Print Settings Printer Brand: Anycubic Printer: Photon Supports: Yes Resolution: .5mm Category: Toys & Games
Píšťalka je remix klasické průšovské píšťalky , který je dodávána na kartě k tiskárnám. Přidělal jsem jí ouško pro zavěšení a vložil logo Sokola na obě strany. Zesílil jsem stěny, aby bylo možné provédst změnu barvy filamentu a stěna byla…
A new 3D figurine generated by AI, a Loth-Cat (Ahsoka - Star Wars). I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of…
This is my Ysoki operative for starfinder I hope you like it ! when i started modeling for thingiverse one thing that really helped me was the community and one of those prolific artists is dutchmogul he provided free sculptris "dummies"…
this is just a toy after all, you can modify it all you want.
This model is compatible with the lego system.
This uniform is in Sokol organization from 1862. You can paint on the printed model almost anything. Enjoy! Sokol is based on Greeks kalokaghatia - balance between strong mind and strong body. Sokol groups started with gymnastic, theaters…
Až si svého bratra Kačera vytisknete a namalujete, budu moc rád, když k fotkám na sociálních sítích přidáte označení @bratr_kacer a #bratr_kacer. Všechny fotky pak budou snadno dohledatelné pro ostatní kachničky! Příjemné malování! ENG:…
1-10 scale sculpture of an oksoko. The model features detailed scale and feather texturing along the model. I created two variants of the model, standing and posed. I recommend printing it at a finer layer height or with a resin printer.…
This is a digital 3D printable model of Ahsoka’s Spacesuit from the Star Wars live action series – Ahsoka. The download contains pieces of the model ready to be 3D printed on a 200 mm print bed (STL) and files that are not cut into…
Experience the raw power of the dark side with this stunning 3D printable figurine that transforms your favorite Togruta warrior into a mesmerizing collectible STL model. This expertly crafted statue captures every intricate detail in a…
Simple logo from Sokol for Sokol organization on doors. Sokol is based on Greeks kalokaghatia - balance between strong mind and strong body. Sokol groups started with gymnastic, theaters and many more activities. It spread around the…
Find more about this 3D model here. --- 3D scan of Franz Viehböck’s Sokol space suit that he wore on his flight to the space station MIR. Franz Viehböck studied electronics engineering at the Vienna University of Technology, and became…
I tried model some compatible brick for LEGO figures. They work very well. I am not so afraid of painting on them now, if I can print them. Now I paint on them uniform from Sokol organization. The uniforms were designed in 1862 by Josef…
| BASIC DESCRIPTION | this is the club from Sokka that he uses troughout the series the shape and size of the weapon is changing throughout the series and even in the episode, but this is an approximation Description from Avatar Wiki (…
Here is a new model from All Things STL and it's a full body of Ahsoka! It is printed in several parts that you can print in color or print and paint. You can see how we colored it and I would have gone a bit darker on the skin color but…