Counting matching models…
To assemble this little web shooter you can use a 4mm diameter spring or even a pen spring, and for the tip of the projectile you can use 5mm diameter neodymium magnets. When assembling it, the cartridge will be attached to the body of…
Magnet of the University of Oklahoma Sooners Logo. It is designed to fit 6mm x 3mm magnets. Base layer should be white. G-CODE has two layer pauses: 3.8mm: add magnets 4.2mm: color change to crimson red
I often spill some ground coffee when making a moka pot. I 3D printed this funnel to make it more foolproof. Right now just the Bialetti Moka Express 6-CUP is finished. More available soon! I’d love to make this for all popular moka pots.…
English: These stackable boxes are designed to optimise storage space in workshops, desks, or garages. With a modular and practical design, they are perfect for storing screws, nuts, small parts, or any type of accessory. Each box…
Print your box for tidying up your print place. The magnetic lid prevents accidental opening. A stackable version will come soon. V2 comes with proper champhers and an assembly version (only 3 parts; all to print) Print In Place Version…
My Flsun Slicer profile solves some blobs, cooling and under-extrusion issues of the default Flsun Slicer profile for the T1 Pro. For Prusaslicer: I need a few more days to improve a little the profile and I will publish it here 🙂 For…
When printing, make sure to rotate it so it can print without supports. Once you are done printing you can wrap electrical tape around the thinner portion of the extension so it fits snugly in the bassoon. This was inspired by…
A Quest 3 Gunstock - adjustable in length - soon I will add a buttstock (work in progress). The front and back part are hold by a magnet and are easy to detach. The fits for the controller can be adjustet in lenght along the rail system.…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Spool adapter brake disc v2 ad5x spool adapter
Tool to soak and store bassoon reeds.
Omni Directional Movement gear from Attack on Titan made for the Dummy 13 figure
Huge thanks to my friend Demetrius for giving me his ⅓ scale federal gearbox model! All credit goes to him for that. Right now this only has the 10/12 variant, but I will later be adding single tone 12, 8, and dual tone 9/12 variants as…
here is how the supports should look for the cup You can use this for the switch grip holder https://www.printables.com/model/588091-replacement-nintendo-switch-grip May require supports more coming soon snaps on easy infill 15% 2 mm…
Behold the greatest bucket handle to ever exist, made to spread the load over your fingers better than the stock handles. I made both a version that fits the common handle size on most 5 gallon buckets (see pic.), and another version that…
This is a completely redesigned case based on the standard parametric box that most designs use. One of the biggest issues I noticed with other cases is that the Pinecil display faces upwards — meaning if the case doesn’t close properly,…
---UPADTE COMMING SOON!--- Das ist ein 3D-gedruckter Choo Choo Charles. Es gibt ein paar Teile zum Zusammenstecken.
Swell added to the bell to improve timbre of low B, C, and D. With the straight version of the extension these notes sound muffled. Recommend printing with a raft, wall thickness of at least 1.2 mm, and infill at 0%. I used PLA. Other…
Sometimes the low B-flat on the bassoon is just not low enough. Composers want a low A (or even lower). See for https://orchestrationonline.com/bassoon-a-extension-dos-donts/ for explanation. On the internet there are several models to…
Here's a preview of V2: Squeezelite-ESP32 player (with 2 DAC options: PCM5102 & ES9018), Max9744 amplifier, VU meters. There's also a spectrum analyser and SqueezeAMP box in the works with the same styling. The main changes are to the…
The design fits most of the pencils that I was able to measure, but I've also uploaded the parametric FreeCAD file in case you need to make adjustments to the dimensions. I recommend printing with a small brim to increase bed adhesion, as…
Introduction Keep your workspace tidy and your tools easily accessible with this versatile screwdriver and bit storage case. Whether you're a DIY enthusiast or a professional technician, this case will help you stay organized and…
rest in peace Hulbert's 2nd legacy system, you will be spared through a 1/4 scale model. sircoms are not enough! disclaimer that, yes, you can put as many cells on it as you want. however, i recommend not going past 20 if put outside.…
Oklahoma Sooners Oversized Necklace Logo that I designed. I hope you enjoy!
Nnscription 2026
marque page personnage coincé dans le livre
I had to make this as Lakeland don't offer replacements for this part that always breaks. Hopefully of use to someone, somewhere! I printed in PLA first time around, but it soon melted and warped (those racks get pretty hot!) so next used…
Made this so I can store my Cirkul water bottle sips in my fridge when not in use. This way I can pop a vanilla coffee sip in and later in the day switch to one of the other flavors! If you don't know what Cirkul is then I suggest you…
Combined OU and SEC logos
Funny Sign - “The Sooner you fall behind, the more time you'll have to catch up”, multi colour print, printed in ZIRO PLA Glitter Diamond Purple and Sunlu Matte white PLA. Complete with recesses for 10mm x 1mm magnets to make the sign…
THE BIG THING IS HERE! the ACA Alertronic AL600R, EOWS*612, and WS-3000 are the 3 sirens i've always looked up to, and one of them be this! huge thanks to Connor B for detailed measurements, this would have not been possible without that.…
Artika Monsoon2 soap tray shelf replacement from costco
Bassoon reed drying rack that holds up to 20 reeds.
All the keys are labled to where they go! For small 3d printer users, just turn the key by 45 degrees in any direction and place it in the printable center! To access the mechanism behind, unscrew the screws shown in the last 2 pictures,…
haven't printed to see if it fits I don't have a working 3d printer at the moment. my friend is printing it for me as a test come back in a few days to see if it fits. I can make other teams if requested (just comment) but not Mercedes.…
really thin model in person but works great
To aviod having the strip adjust the insert slot to 0.5- you will need an 0.2 nozzel It wpuld not print the slot using 0.4. Category: 3D Printing
Oklahoma Sooners Retro Oversized Necklace Logo that I designed. I hope that you enjoy!
Printed at 0.2 mm layer height on Bambu Lab P1P without AMS. Single color/extruder printers supported. (Separate colors) Directions: Go to your slicer and slice the model. Go to the digital print time gauge/slider to see the print…
Keep your haircare products off the floor and tidy with these handy mounts. Tangled cables eventually cause failure, keep the tangles to a minimum by hanging your haircare devices up rather than chucking them in a basket or on the floor.…
Some excellent bocal-mounted pickups are available for bassoon, like the Little Jake, but they are relatively expensive and require bocal cutting. This pickup can be made from about $1 worth of parts and be used without modifying the…
IMPORTANT: The machine this model is used for is made by the awesome sauce Futtawuh! If you have somehow stumbled here not knowing what that machine is check it out on his github or on printables . Instructions: You are gonna need one…
If it is small on cura or creality please enlarge it by 1000 percent.
More to come soon. stay tuned
Parametric modelling version soon, to allow customisation! .STEP file included for modficiation.
May the 4th be with you mini desk sign Imperial edition - more designs coming soon
Two tiny rare-earth magnets secure the tip to an ordinary tape measure. To check for squareness, woodworkers measure from corner to corner on opposite sides and make sure the measurement is exactly the same. If you need to measure from…
more photos coming soon
Fixes these challenges: If you want to remove the top plate to work on the “middle layer”, the whole drone just falls apart. If you use two thin nuts to hold the arm mounts and bottom plate together, you can then use nuts to hold the top…
3D printable ACA P10 more is coming soon hope you like it.
Body Post (Part # 86786) for a Redcat Monsoon RC Truggy. No holes, you'll have to drill those yourself, too hard for FFF printing. Not recommended for resin printers due to the brittleness of the resin. Print 100% infill using CF-Nylon or…
A simple and fast corexy printer (coming soon).
RPI Display Box Mini / Mini+ Case and interface parts for mounting your RaspberryPi 3B / 4B / 5 at the back of the Mini/Mini+ display box. Printing Notes: Layer height 0.15 mm. Designed for 0.45 line width. All supports are integrated…
Bracket to mount the Lightware LW20/C (SF20/C) to the Hexsoon EDU450 Drone Frame
DO THIS AT YOUR OWN RISK! This battery plate replaces your Accsoon Cineview's original battery Sony NP-F battery mount in place of dual Canon BP dummy slots so that your Accsoon Cineview can mount directly to the back of your RED Komodo…
I made this to be a cute way yo hang your poloroids
After searching far and wide for the lower part of the body lock for my Selmer 1432b Bassoon I couldn't find the lower part. So I designed this body lock for the lower part. 3d printing these screws would not be feasible, so I found some…
leave supports on at the bottom
Remix of one of the X gantry adaptors from the Hero Me 7 files.
this is a California scream master siren first on printables
The Comsoon J22 bluetooth adapter is a unit which allows your phone to connect to bluetooth, and provides a line-out to connect to a stereo or Aux IN in your car radio. In this case, I'm using it in a 1986 Corvette with a Pioneer radio…
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…
a cube its just a cool cube for jjk fans (gotta size it up a lot)
Printed with PLA+, 0.28 layerheight, 15% filling and minimal support. Has mounting hole at the bottom to fasten the Accsoon with regular 3/8 bold
star wars May the 4th be with you rebel edition - more designs coming soon
This is a simple stand for an EZQuest Monsoon drive, a little wider and sturdier than the included stand. It may be suitable for other drive models. The SCAD is included for customization. Instructions This prints well in PLA or ABS.…
Accsoon F-C01 Follow Focus Controller Quick Release Adapter I printed on Neptune 4 with tree supports at 0.20mm resolution and 50% infill. It works well. The sides are 2mm thicker than the original for extra strength, but it fits just as…
Make a statement with this Oversized Hype Pendant! Designed to be printed large, this pendant is perfect for showcasing your favorite teams, brands, characters, logos, hobbies, or other unique designs. Whether you’re creating something…
make more, be cooler! 😎😎😎 if you make one, please do a "Make" for this. thank you! Category: 3D Printing
3 Scales of Thunderbolt Siren Stators, the drilling templates will be out soon. Needs Brass, Zinc, Cast Iron and a hint of copper or bronze.
work in progress fursuit head with modular parts hopefully cut up to fit standard printers and smaller printers. with easy glue free/lite assembly that will be able to print well to be friendly to new users. this is only uploaded now for…
Een kartonnen theedoosje ontvouwen en geprint met een persoonlijk tekst erop. Een cadeau doosje. Je kan het maar 1 keer gebruiken om dat het materiaal te dun is. Als je de kanten plooit op de lijnen moet je voorzichtig zijn dat je niet te…
Finally, a new siren model! this can be printed in 9/9, 12/12, or 9/12 This model (potential) uses a Samsung DE31-00029H
ONLY WORKS WITH SWITCH 2 JOY CONS!!!!! Yet again, magnets are optional but highly recommended. There are files for if you dont want to use magnets. A link for the magnets will be down below. I made this to celebrate new gumball coming out…
v3 coming soon with holes
keychain spinner with grip and other shape feel free to upload a make or comment what i can do better, it helps.
4 of spades card for full deck pt4 more coming soon
**The Print Setting That Changed Everything for Me** Okay, confession time - I spent WAY too long printing with 0.2mm layer heights because that's what all the "getting started" guides recommended. I thought going thicker meant crappy…
This design is a new variant of my previous design which allows me to mount an Accsoon wireless transmitter under my RED Komodo by replacing the back plate for the NPF battery (since I use the DC jack to power the unit anyway). You should…
OU Oklahoma Sooners Hitch Cover. This will fit standard 2" & 2.5" hitch receivers.
Oklahoma Sooners Hitch Cover. This will fit standard 2" & 2.5" hitch receivers.
3D printable ACA P10 more is coming soon hope you like it.
My Flsun Slicer profile solves some blobs, cooling and under-extrusion issues of the default Flsun Slicer profile for the T1 Pro. For Prusaslicer: I need a few more days to improve a little the profile and I will publish it here 🙂 For…
IMPORTANT: The machine this model is used for is made by the awesome sauce Futtawuh! If you have somehow stumbled here not knowing what that machine is check it out on his github or on printables . Instructions: You are gonna need one…
This is a completely redesigned case based on the standard parametric box that most designs use. One of the biggest issues I noticed with other cases is that the Pinecil display faces upwards — meaning if the case doesn’t close properly,…
To aviod having the strip adjust the insert slot to 0.5- you will need an 0.2 nozzel It wpuld not print the slot using 0.4. Category: 3D Printing
Keep your haircare products off the floor and tidy with these handy mounts. Tangled cables eventually cause failure, keep the tangles to a minimum by hanging your haircare devices up rather than chucking them in a basket or on the floor.…
**The Print Setting That Changed Everything for Me** Okay, confession time - I spent WAY too long printing with 0.2mm layer heights because that's what all the "getting started" guides recommended. I thought going thicker meant crappy…
4 of spades card for full deck pt4 more coming soon
RUBBER GUN AMMO 40 (soon gonna make 80) much bigger
this is a custom siren made by me (re-model soon)
A 3d-printable model of Monsoons Shai knives from the videogame Metal Gear Rising This includes a full model as well as one split into 3 parts for assembly using 4mm support rods
Love this little vise. I can even toe clamp it down. Will be using it for laser engraving blanks. I am modifying the vise to have removable Jaws. All base files have been uploaded now. Sorry, I have been busy with other projects. Still…
These are a bunch of pencil toppers for round or hexagonal pencils. DO NOT SCALE DIFFERENT.
![[re-model soon] C.S.C Electronic Directional Unit (E.D.U for short)](https://media.printables.com/media/prints/10a5f4a9-0aee-4d1c-802c-fd282111aead/images/12811370_c73908c2-3883-4846-97dc-37f3f8f79ab7_136fc48b-0206-43e0-bce3-0cd13f519ca9/screenshot-2026-05-01-23509-pm.png)
