1 / 14
Prusa Mini Display Box RaspberryPI Case 3B, 4B and soon 5
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting Raspberry PI 3B, 4B or 5 (Soon...) at the back of the Prusa Mini display box cover.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 20
- Makes
- 0
- Views
- 325
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
RPI Display Box Mini / Mini+
Case and interface parts for mounting your RaspberryPi 3B / 4B / 5 at the back of the Mini/Mini+ display box.
Printing Notes:
- Layer height 0.15 mm.
- Designed for 0.45 line width.
- All supports are integrated into the model as removable / breakable wall with 0.35mm THK. (No supports in slicer needed)
Post processing:
- Interface part1 - Insert regular (DIN934) M3 nuts into hex openings.
- Tap x4 pillars with M2.5 threads.
- Break remove print helpers (support walls).
- Deburr parts.
Hardware required:
- DIN934 M3 nuts, x4.
- DIN912 M3x12 bolts, x4.
- DIN912 M2.5x10 bolts, x4. (I've used M2x10 without tapping the pillars, feels solid enough)
- DIN912 M3x8 bolts, x4 - Original LCD bolts can be reused.
- Longer LCD ribbon cable, length ~ 30cm, 2x7 14P Aliexpress links: https://www.aliexpress.com/item/1005003161799870.html
https://www.aliexpress.com/item/1005003853804182.html
Assembly notes, R0:
- Stock LCD ribbon cable is short by 2 cm :) bummer !!!
- Temporary extended using dupont 0.1" M-F jumpers, see pictures.