Counting matching models…
A small box for an ESP01S with relay module. I used it for making my doorbell smart following Francks tutorial: https://frenck.dev/diy-smart-doorbell-for-just-2-dollar/ Fusion 360 file is included. Print instructions I only added supports…
ESP01 + DHT modul case Print instructions Category: DIY Summary ESP01 + DHT modul case Print Settings Printer Brand: Creality Printer: Ender 3 Pro </div> Rafts: No Supports: Yes </div> Resolution: 0.16 Infill: 25% </div> Filament:…
This very simple box allows you to cover the Esp01 Wifi module on the TFT35 screen. Print instructions Category: 3D Printer Accessories Summary This very simple box allows you to cover the Esp01 Wifi module on the TFT35 screen. Print…
ESP-01s & ESP01 Relay V4.0 Housing DIY WIFI AC Relay (Flash your ESP module using EspHome Webtools online flasher) Print tips: PETG (Preferable) 0.2 Layer height No supports Bed 70 Nozzle 235 Components: 3D printed ESP01_Relay_Housing 3D…
A simple case for a relay meant to be used with a device that accepts also 5v (in my case, a water pump). This case is designed in a way that the input and output are normal USB cables, which will be shared between the relay and the…
Adapter: https://de.aliexpress.com/item/32971337222.html Category: Electronics
A small box for an ESP01S with relay module with the power supply, button from the computer mouse and cable connector
printing tipps: Please print in PETG or ABS, since PLA may not be stable enough in higher temperatures which may occur adjacent to other electrical devices. transparent material for the lid (top) will let the LEDs shine through.…
A box for your ESP01 relay module. Has holes for all the cables and the reset button. Includes a snap fit cover. Everything fits very snuggly, so there's a tool hole at the bottom so that you can remove the board from the box if needed.
Check video on youtube: I printed the diffuser in vase mode, since I could not print it without breaking, I made a little edge for strength. (which does not bother me much) Then assembled and loaded the ESP-01 with programmer (or loosely…
The case is designed so that the module is not accidentally shorted by something that lies on the table and conducts electricity. A very useful thing. Please feel free to call. I will be pleased with your good assessment. Link to device…
Simple stackable gridfinity bin for ESP01//ESP8266 boards
BigTreeTech TFT 35 E3 V3.x full enclosure (ESP-01 supported) Since I didn't find any good and easy-to-print enclosure for the BTT TFT35 E3 V3.x, I challenged myself to make one from scratch. The Ender 3 pro metal sheet screen support is…
Can be printed without any changes, original is in PLA.
Parts used: 1x ws2812 led ring with 24 units 1x esp01s 1x ws2812 esp01s to ws2812 adaptor unit Firmware: ESPHOME Configure the led ring with neopixelbus Here is an example that works:(Only the light section of esphome configuration file)…
Simple enclosure for two very popular Dual-Channel relay modules that I made for myself.. Up to two modules can be installed. The enclosure was designed to be mounted to the walls of bigger box. Cutouts give the access to the fixing…
It's a small case/box for e.g. a DHT22 or DHT11 sensor. In a seperated compartment I placed a ESP01/DHT board with a small psu. There is a small area where you can tie wrap the incoming power cable. You get one of those ESP01(S) DHT…
Case for rgb pcb board to use with ESP01(S) and WLED. A modified version is also available has a 20mm pipe adaptor.
The DTZ541 is a common meter in Germany that provides an infrared transceiver to read information off the reader, e.g., for integration with Home Assistant. There are several IR heads available that can be bought preassembled, often…
This is just the right hand side part, you will need the case body and left hand side from the original model, and the clip, if desired.
Category: 3D Printer Accessories
I don't have a 3D printer myself! If you print this, please post a 'Make' with a photo. I'd love to see how it turned out!" The Baratza Encore Ring Burr Holder keeps breaking on my dads coffee grinder so I designed a replacement part for…
Next level: https://www.thingiverse.com/thing:5320903 Case for ESP01 and DHT11 and Adapter Borard an Micro USB Power adapter Power and DTH11 Adapter: https://de.aliexpress.com/item/4000035981362.html?spm=a2g0o.9042311.0.0.7b674c4d2Hmxcf…
CH340C ESP01 Two Socket USB Programmer Case with Caps. Resized the case to accommodate a modified lever from ESP32-WROOM-32 (USB-C) Box with Lid model for the reset button. Added thickness and three versions of an optional protective cap…
Mini case for a ESP8266 ESP01. I used it together with this: https://www.printables.com/model/447136-prusa-mini-buddy-board-cover-with-hole-for-externa to have my wifi module outside of my Prusa mini → This improved my wifi connection a…
Soporte para pantalla oled y esp8266 01 para printer monitor. Printer monitor es un programa que te enseña la información en tiempo real sobre la impresión en una pantalla oled. Cuando la impresora no está imprimiendo, puede apagarse la…
Gehäuse für den ESP01, ich brauchte das Gehäuse um den ESP01 vom WIFI Lesekopf von Hichi https://www.ebay.de/itm/314152997777?hash=item4924fa5391:g:a~MAAOSwk3xhfcKN aus dem Zählerschrank zu montieren. Die Box hat eine Kabelausführung mit…
This is an enclosure for an ESP01 programmer by AzDelivery (and similar, see picture). Additionaly it is a breakout board for the pins and adds buttons for easy usage. I decided to upload my ESP01 programmer, because it is so handy and…
I needed case for the wifi garage door opener I made from an ESP-01 and a relay module. Case has slots so you can mount it to a cable or other item with cable strapping or cable ties. No support needed.
Case for ESP01 and DHT11 and Adapter Board an Micro USB Power adapter The docx file contains a ZIP File with KiCad files to order the PCB. Power and DTH11 Adapter:…
After multiple prototype where I put the sensor and the Esp in the same box, I found out that even with many walls between them the heat from the voltage regulator would make the sensor read 0,5 to 2 °C more than a sensor in the open air.…
Cap can be printed in Vase Mode. I removed the LED (Resistor) on the Neopixel Board (way to bright). The one on the ESP is aligned with one RGP LED Ring. So the Status (on/off) of the ESP can also (not as Bright) been seen in one Segment…
I want to thank Mark_Alpha for his model 2x Dual Channel ESP01 Relay Module Enclosure , which is used for 2 relay modules, but I only needed a box for one module and also the screws for Mark's original model are too long, so I remixed…
This is a minimalist remix from bonticus design. For CZSP01 magazines. (with a snug fit) I will post a CZP10 version later. Printed this in Petg in the correct orientation for strengh (see original model) I used 3D honycomb infill with 3…
I build this Device so my daughter could send “cannot sleep” messages to our Phones. DC-DC Modul: https://shorturl.at/Lm2Zz Aliexpress The ESP is flashed with Tasmota: https://templates.blakadder.com/ESP-01S.html Integrated “Nightlight”…
Based on https://www.printables.com/model/74330-tft35-e3-v3-case Provides an additional slot for the ESP01S wifi module if you want to use it in the TFT. I use it this way because it displays the IP address on the TFT this way, and at the…
A replacement lid for all the new Sage coffee machine hoppers. Designed to mimic SP0102250 It needs a solid 160mm diameter 3mm thick disk - I bought a clear Perspex cake disc from amazon but you could print it. It should be printed in TPU…
I haven't seen a new-style Baratza coffee grinder gasket so I whipped this up. Directly modeled after the Baratza gasket. I have an Encore and it fits perfectly into the burr holder and over the hopper outlet. I have not tested it on…
Altough a specific model for a certain scenario I decided to share it. The original manifold for this engine is point towards the right hand side. I needed one that is LHS, because more room for air filter and further from the exhaust…
I needed case for the wifi garage door opener I made from an ESP-01 and a relay module. Case has slots so you can mount it to a cable or other item with cable strapping or cable ties. No support needed.
This is a minimalist remix from bonticus design. For CZSP01 magazines. (with a snug fit) I will post a CZP10 version later. Printed this in Petg in the correct orientation for strengh (see original model) I used 3D honycomb infill with 3…
I want to thank Mark_Alpha for his model 2x Dual Channel ESP01 Relay Module Enclosure , which is used for 2 relay modules, but I only needed a box for one module and also the screws for Mark's original model are too long, so I remixed…
Box for a 2 channel ESP-01(S) / ESP8266 based relay board such as https://www.aliexpress.com/item/1005004533412591.html http://www.chinalctech.com/xwzx/24.html Requires the great https://github.com/mrWheel/YAPP_Box Note that this relay…
Soporte para pantalla oled y esp8266 01 para printer monitor. Printer monitor es un programa que te enseña la información en tiempo real sobre la impresión en una pantalla oled. Cuando la impresora no está imprimiendo, puede apagarse la…
Box for a 2 channel ESP-01(S) / ESP8266 based relay board such as https://www.aliexpress.com/item/1005004533412591.html http://www.chinalctech.com/xwzx/24.html Requires the great https://github.com/mrWheel/YAPP_Box Note that this relay…
The case of one of the smallest controllers, which can easily be lost among office papers.
![Actually accurate Esp8266 (Esp01s) Temperature sensor using ds18b20 [Tasmota/EspHome]](https://media.printables.com/media/prints/279448/images/5649478_1530bba2-be3c-4b75-83c3-65522573e3dc_282046f2-afd2-424a-bf0c-cdabdbfa6927/screenshot-2024-01-13-alle-213022.png)
