Counting matching models…
Useful for finding the right distance of the Super PINDA from the print bed. The optimal distance for the Super PINDA is about 1.5mm. That should get your optimal Live Z/first layer calibration to somewhere around -1.00, so you'll have…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for one variant
This is a parameterized spindle for storing CDs / DVDs / Blurays with a screw-on top to prevent the discs falling off. It fits all the disc types listed above and has a small bump on the bottom so the bottom disc does not scratch on the…
Just a toilet paper spindle in case yours broke. No Springs Needed so Its fully 3D Printable Best Printed with 0.16mm layer height or smaller When installing be sure “Spindle Female.stl” is on the right side to avoid unscrewing while…
Print approx. €3.88–€4.75 excl. taxPreliminary estimate for one variant
This lathe spindle spider fits small lathes with a rear spindle thread of M27x1.5. This includes many 7x10/12/14 inch lathe models. Assembly There are 8 holes that need to be tapped M6x1.0 (the equivalent length ¼"X20 screws should work…
Spindles, nuts threaded inserts fitting TR8x8 4 grooved systems. Primarily intended for use in the further modeling process.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Get your hands on a wood trimmer. Any 65mm wood trimmer will work. I got a cheap one for $30 and it works fine. Print the device with relatively high infill. Attach your 8mm linear platforms. They should bolt right on. Attach the linear…
Ridgid Model EB44242 Left handed star nut wrench. I drilled mine out to glue in a magnet for storage.
Which collets will fit? 401E (OZ8), DIN 6388A Found in spindles/routers from Kress, AMB, Isel, Mafell, Stepcraft Each position will accept collets with or without nut attached (tested with Kress/AMB nuts) A short type 17mm-spanner will…
This lathe spindle spider fits small lathes with a rear spindle thread of M27x1.5. This includes many 9x20 inch lathe models. This is a modification of my 7x10 lathe design - resized to fit my 9x20 lathe. Assembly There are 8 holes that…
Okay you Sublimation Printer makers, you asked for it, you got it. :D A standard office tape dispenser is too light to use one handed. So here are a couple of spindles to use with large, heavy dispensers like this one...…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
This one is for you Sublimation Printer makers that use heat tape. The spindle for a standard tape dispenser is too small and doesn't hold the tape. This spindle is 32mm in diameter. Edit: Also see my 32 mm and 78 mm spindles with 6 mm…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for PETGSource material: PET
The spindle of my adhesive tape dispenser was lost. Hence, this project was made. As the shaft of the spindle caused difficulties in printing, in terms of needing a lot of supports. Hence, the spindle was broken down into two parts, the…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for one variant
The hamster wheel for my daughters class pet was squeaky and barely held on. Since it's a very small hamster, I did not find any small enough wheels that could hold onto the cage. Hence I've designed something myself. Wheel specifications…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for PETGSource material: PET
Many small lathes (such as my 9x20 lathe) have an internal Morse MT3 taper in the head-stock spindle. When using a center in this MT3 socket, it is very important that the socket is very clean to ensure maximum precision. This simple…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant
45 rpm records to 33 rpm spindle included fusion360 file so you can customize print with engraved area on printbed change filament color when prompted if two color wanted 1st color is topface 2nd color is lettering and underbody
Designed this as a replacement for a spindle that was broken. Both pieces were printed with the open falt side down, the tiny nipple is facing upwards. Printed at 0.20 Speed setting from Prusa Slicer, 15% infill, no support needed. The…
Used with the Shaper Origin router. This dummy spindle can be used for gridding exclusively to avoid changing bits in the original spindle. This helps speed up the gridding process. Insert ¼ inch dowel in the end and you're good to go.…
Print approx. €8.79–€10.75 excl. taxPreliminary estimate for one variant
Turntable platter for dyi turntable project. Belt driven Designed gimble headshell and pivot for gimble join tone arm base to motor base with rubber/foam tape to isolate motor noise from tonearm base or make wooden base and use pre-made…
This print protects the threads of your lathe spindle when you are using accessories mounted in the MT3 spindle bore. This is for a 9x20 lathe (or any other lathe) with an M39 x 4mm spindle thread. I also included a test print piece which…
This is a Spindlestop for a Lathe with 26mm Spindlebore. Extend it with M8 threaded Rod to the length thats needed. I added a 300mm Rod. For stabilisation you can screw one of the stops with M8 thread somewhere in the middle of the…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
Horia jeweling tools come with either 3mm or 4mm replaceable spindles; this support aides in the process of changing them out. The support features 2 ends: one contains a simple taper, the other is slightly more recessed with a flat and…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
Die holder for lathe tail spindle with 22mm diameter and dies with 25mm diameter.
Print approx. €2.90–€3.55 excl. taxPreliminary estimate for one variant
Keeps a need stack of to coasters repurposed harddrive platers. Instead of throwing your end-of-live disks to the public garbage. And perhaps spending time making sure your data is not thrown away with them. FYI It's pretty easy to open…
Diese beiden Anschläge werden magnetisch am Fest- und Loslager der Z-Achse der Volksfräse VF1 hinter der Spindelplatte montiert. Sie schränken das Spiel der Kugelumlaufmutter nach oben und unten genau um die Längen ein, dass die…
Print approx. €1.50–€1.84 excl. taxPreliminary estimate for PETGSource material: PET
This may or may not work for your stairs, it's pretty particular to my staircase. Try out the test fit print first to save your time and filament. Here is a link to the onshape document where you can edit the diameters and spaces in…
Print approx. €3.05–€3.72 excl. taxPreliminary estimate for one variant
This is a simple thread protector for a lathe spindle. Fits a 34mm 1.5 threads. Printer: MK3s, Filament: Inland PETG Red.
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
This Quick Spindle Lock was maade for use with Spool Holder shown at https://www.printables.com/model/474152-mk3s-spool-holder-upgrade/comments/868896 but it should work for similarly sized spool holders. It can be applied to the spindle…
Toolholder for the Accessoires for Scheppach OSM100 oscillating Spindlesander.
This model has been updated and reuploaded. The parts have been redesigned to make the clock stronger and incorporate removable spokes. As a fan of George Nelson’s design work, I decided to recreate his Vintage Spindle Clock and turn it…
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … Similar to GekoPrime's Clip for the other places. But this…
Untested work in progress
With this sanding spindle you can use your drill / cordless drill / drill press as a spindle sander. I used it with 80 grit paper for shaping a guitar body. I will update this with different sizes in the future. Additional parts you will…
Last night I had to readjust the Super PINDA on one of my printers. I found a bunch of height gauges for the old PINDA/MINDA on prusaprinters.org, with a height of 1-1.2 mm: https://www.prusaprinters.org/prints/27679…
I don't like how the spool sits on the original Spindle so I adapted my old design to work with the Stock mount and also with https://www.printables.com/model/698864-anycubic-kobra-2-max-spool-kobra-2-plus-kobra-max- This Should fit most…
Prusa empfiehlt die PINDA mit einer Kreditkarte einzustellen, was mir nicht so gefällt, da man mit der Düse an das Druckbrett fahren muss und diesen beschädigen könnte. warten bis gereinigte Düse abgekühlt ist. Drucker ausschalten.…
This Upgrade gives you the Ultimate 3018 CNC Machine - PCB's and Aluminium can now be milled accurately. Build Steps: Remove the old X-axis rods and Z-axis carriage Loosen the vertical X-axis mounts and slide them as far rear as they'll…
Meet SpinDeck Fidget, a 3D-printed stress-relief toy born from the world of skate culture and magnetic magic. It’s made of two mini skate decks, each packed with 8 strong 8x3mm magnets that click, spin, and dance together with every move;…
Generic tool mount for most 52mm spindles. Print instructions 45% infill is probably more than enough, 2+ perimeters (1mm+ walls) Fits the MPCNC Primo version only. https://www.v1engineering.com/
A very quick remix of one of the parts in Tomas ' 100% Printable Clamp (Not only for Nipples! :-) to add a loop for attaching cord or chains . This is only the spindle part , so please see Tomas' original model for the other 3 parts you…
(English version below) Erweiterbare Umkehrspindel basierend auf Vorarbeiten von Florian und Ideen von Florian, pinot und Stefan aus der ft:c . Zwei Endstücke mit beliebiger Anzahl von Mittelstücken. Die Endstücke alleine ergeben eine…
I haven't been able to get one of the Jenkins Spindles for my wife so I figured I'd design one myself. I took inspiration from their designs and from Snyder Spindles. There are three sizes of spindles. I believe the large is similar to…
Will print without supports. You might want to use a brim for the taller part.
Designed specifically for the "Makita RT0701C 1‑1/4 HP* Compact Router" Spindle holder is designed to work with stock lead screws, linear rods and bearings as well as anti-backlash nuts. In order to use the upgraded Z-Gantry, new lead…
UPDATE: added instruction video in german (sorry no english. you dont want to hear my bad english for 20 minutes :D) added a whorl in single and dual color with tighter tolerances and a corresponding press fit test. Use those when you…
Spindle with reinforced base for Yarn Spinner (Rotating Skein Holder for Crochet/Knitting) by mshipman
The Pastamatic Winder is great, but the donor spindle wasn't long enough to attach 2kg Polymaker spools. This model extends the donor spindle 1.75" to accommodate wider spools.
Use petg, abs or a similar heat resistant filament
Hier ein Remix. Das Blanko-Schild ist zum Ausrüsten aller Spinde gedacht, da die AGT Träger ihr eigenes Schild erhalten. So ist alles einheitlich und kann bei Bedarf ausgetauscht werden. Für den farbigen Schriftzug einfach im PrusaSlicer…
This is a 4 part cnc router dust boot assembly designed to be used with the Makita RT0701 router spindle or similar 65mm router spindle. The main body features 12 exhaust ports to expel the spindle exhaust perpendicular to the boot and…
Just a 65mm Spindle Clamp
Should fit most 55mm spindles with 57mm collars. MPCNC Primo version only. https://www.v1engineering.com/
I created this die holder because a D20 is susceptible to being accidentally knocked over or rolled, losing track of your precious life total. This model is scaled for a standard Magic: The Gathering spin-down life counter. If you want to…
NOTE: YOU NEED TO MIRROR THIS FOR THE 2nd SIDE. A simple holder, you can use a ¼" or 6mm steel rod or upside down end mill to hold it in your spindle and then clamp the dovetail of your test indicator to it as well. Best to position the…
When looking at the machine, make sure the fan blades are slanting from top left to bottom right as shown in the picture. There is now a shouldered version stl if you are having issues with the fan sliding up the spindle
Dieser Remix eines Modells von Hannes Weisbach LINK und das Netzteil-Gehäuse wurden während eines Twitch Streams entworfen, modelliert und aufgebaut. Das Projekt ist für die Inbetriebnahme des Sets “ER11 Chuck CNC 500 W Spindelmotor mit…
This model is compatible with the lego system.
Printable spindle container box (75x25x68mm) for Festool Systainer Organiser (such as item number 204852). Held in place using 2 pcs 5x5mm cylinder magnets. Best held in place with a small bit of glue. Make sure to align the magnet's…
12mm neodymium magnets, nut M3 DIN 562
for slim spools like the old Makerbot spools.
Pastamatic - Filament Spool Winder - Drive (spindle) Retainer Helps to prevent the drive spindle from popping out of the gears …
Back Ground I found the “Spindle Wool” by efrost on Thingiverse. It was a good model both the size of the spindle and the STL file provided were problematic. So I designed this Spindle from the ground up in Fusion 360. I made this one…
This is a little mod for the MK3s to add a 608 ball bearing per Z spindle at the top end. The Z motors need to be a few mm higher (additional length of the spindles at the top end to fit into the bearing) so there also new mounting parts…
This simple accessory mounts directly to the pen drill to protect against material projection during processing. The spindle wrench is more convenient than the supplied fork wrench for small diameter bit. Accessories designed for the PFBS…
This adapter is for the ORIGINAL donor spindle of the pastamatic. It accomodates 72mm center bore spools as pictured (mainly older Sunlu spools).
Inspired by the Abbey Bike Tools Saddle Height Bullet (part of their Fit Kit ), these tools are inserted into the end of an installed bicycle crank and allow for easy and consistent measuring of saddle height. Improvements from the Abbey…
I love this yarn spinner design but found that the spindle peg was a weak point - over time it would weaken and snap in half on me at the junction between the spindle and the base. I think it'll be much stronger if it's printed lengthwise…
This is a Turkish Spindle I designed for a friend who needed one for her weaving. It doesn't require supports. I printed it in PETG.
In addition to my revision of the drive transmission of the Y axis (see here and there ), I have also revised the holder for the spindle motor so that backlash-free T8 spindles can also be used with it. In addition, there is a cam for…
My wife really likes this model a lot but I noticed that I couldn't find it or something similar here on Printables so I wanted to reupload it. It uses a standard skateboard bearing to spin. From the original upload: Print both parts,…
Reinforced Main Drive Spindle - just as the description states. I had my original split right in the area - that I reinforced. I probably shouldn't have tightened it so much.
This is a replacement leadscrew and winder spindle for the fantastic Pastamatic. It fits the refillable Sunlu spools with a width of 50mm and a center bore of 62.7mm. Tested, works.
Pastamatic Filament Spool Winder Add-On by Kistek. This add-on is for Pastamatic filament spool winders and is meant to secure the drive spindle so that it does not come out of the cradle during operation. This is especially important for…
This remixed dust shoe is designed to work with the Inventables Spindle Carriage, P/N 80033 for the Dewalt 611. The upper dust shoe and support arms now contain slots for nuts (both square and hex). This should allow for…
A large spindown die to hold your smaller dice. Uses 8mm dia magnets (3mm thick) that are glued in place for the hinge / locking mechanism. The “CTG” lid has the logo of my local gamming store. To assemble: Items needed: Magnets, 8mm, 3mm…
This magnetic dust shoe is designed for 80mm CNC spindles . It was designed to be used with transparent PVC (>1.0mm recommended). The PVC is simply wrapped around the magnetic ring, after which the retaining ring can be press-fittet (e.g.…
This part needs no screws, it just sits on the top extrusion of the Ender 3V2 frame. It fits one ball bearing with outer diameter 24 mm and inner diameter 8 mm, for example SS-628-ZZ Print it the same orientation it will sit on the frame,…
Schleifspindel / grinding spindle Schleifspindel in den Größe: 30mm x 50mm 50mm x 50mm 80mm x 50mm Bohrung für Gewindestange: bei 30mm -> 6mm bei 50mm -> 6mm bei 80mm -> 8mm Grinding spindle in the size: 30mm x 50mm 50mm x 50mm 80mm x…
This is an upgrade for the standard cooling fan included with the 500W Spindle commonly used on small DIY CNC milling machines. It prints easily and needs no supports. There is an open and a closed version, depending on personal…
Edit 01.08.2025: Zurzeit wird ein neues Zahnrad getestet, da anscheinend das aktuelle Zahnrad mit dem Zahnriemen zu stark abnutzt und die Riemenspannung zu hoch ist! Suche hierfür auch ein paar Leute die dies für mich testen! Um eine…
Revised Carvera Spindle Fan by Fae Corrigan. This version has slightly thicker blades plus other improvements.
A friend needed an adapter to try out a 65mm spindle in the existing 69mm spindle mount on his small CNC router, so I drew one up and printed it. Prints upside-down on the flange so you don't need any support.
These are small plates with indentations for your magic spindown dice. I made two plates, one for the regular spindowns and one for the newer big spindowns. Fast and easy to print and a nice gift for your friends. I added two dice per…
Update Feb 2026 : Multiple diameters of spindle have been added. All new models have the V2 prefix. New spindles are not compatible with the old V1 base and bolt. Details: This is a smaller yarn winder spool for a generic Amazon yarn…
We had a difficult time getting the files to make a spare dust shoe, so we downloaded them from OnShape, resized them to the appropriate size (100%), and re-exported them in a ready-to-print size. They're easier to find, download, and 3D…
English: Should fit every locker. If not, you can easily adjust the hook with the f3d file. Deutsch: Sollte bei jeden Spind passen. Wenn nicht kannst du den Hacken mit der f3d Datei leicht anpassen.
This a super basic 4030 Desktop CNC Router Design for 65mm Spindles, eg a Makita Router or 1.5kW Air-cooled VFD unit. I'm publishing this due to a request, however it doesnt fully match my current machine spec, and may be incomplete in…
Hallo zusammen, hier teile ich euch meine Halterung für die Z-Achsen Spindel. Ich habe diese Halterung konstruiert, damit ich kein Wobble mehr in meinen gedruckten Teilen habe. Als Lager habe ich ein 608RS genommen. Welches einen…
I made this dust shoe after upgrading my Genmitsu CNC 3020 to use a Makita RT0701 trim router. I never really liked how the Genmitsu dust shoe bristles would get crushed and pusshed into the endmill during deep cuts so I decided to make…
A replacement spindle for the yarn winder, it is 120 mm long (the original one is 82.5 mm long). Helps to wind larger balls, created to prevent the slipping of yarn when the ball gets too big. For SLA/resin printing : it can be printed…
simple spindle for those of us still rockin CD's and DVD's.
Important! Before printing this, please check the spacing of your CNC X axis rods. I've added two test pieces to check the fit before printing. One for 68mm spacing and one for 72mm spacing. I didn't realise there were so many variations…
A large Spindown D20 (Icosahedron) to use in a game, or just for aesthetic purposes. Printing Tips - If you do not use the included G-code: Supports are necessary (but not for bridges) A high infill % will take a lot longer to print, but…
--Settings-- Layer Height - 0,1 mm Print Speed - 50 mm/s Wall Line Count - 3 No Support Build Plate Adhesion Type - Skirt or Brim
I upgraded my cheap chinese CNC with end swithes following this design: https://www.thingiverse.com/thing:2796202 But standard brush motor produces so much noise, that inputs of GRBL controller board was triggered immediatelly when motor…
TODO: The hole for the tightening screw needs to be slightly enlarged. It is barely too small for the head of the 10-24 screw. The screw will work and fit, but depending on your printer's accuracy, and material, it may split the print…
This is a tool that fits on the bull gear of a Craftsman/Atlas lathe to assist with removal of the chuck. I measured and modeled this to fit my Craftsman/Atlas 12" lathe. It may fit other Atlas lathes. I've included the stl file of what I…
This is a remodel of my Avid CNC Dust shoe that has been modified to work with an 80mm spindle. The skirt is in two parts so you can remove the front half to do a bit change without having to remove the full skirt. I chose to use Magport…
This is a machine-battery adapter for a Parkside drill that originally used 18V Ni-Cd batteries and is now able to mount 18V Li-Ion batteries (in this case Einhell Power-X-Change). The drill works perfectly with the new batteries, even…
![[OETS] Trapezoidal Spindle standard parts TR8x8 4 grooves](https://media.printables.com/media/prints/1208965/images/9077602_d2773ff5-45d3-4cfd-ae6e-3184a99443cc_992f56be-1c9e-485c-b2cd-bb5ace0b8d2b/ff971991-b628-453e-af03-db08bab7bc1d.png)
