Counting matching models…
Intro A clean and elegant twisted spinning top that spins incredibly long and stable . Perfect as a small desk toy, fidget, or simply a beautiful kinetic object. The twisted body is not only a visual highlight – it also helps to keep the…
A small, assemblable pinwheel that can fit in a wallet or an envelope. It's the size of a credit card and 2mm thick, and spins when air is applied. Enjoy! How to print PLA 0.4mm line width 0.2mm layer height Freshly leveled bed, + a fresh…
It's a spinning top optimized for a good runtime, but without the need for additional parts (like a ball bearing for the tip). My best run was two and a half minutes. Print with 100% infill and random seam placement . Sanding the tip…
The Super Spinning Top is designed to spin longer, smoother, and more satisfyingly than your average desk toy. Its wide base and low center of gravity reduce wobble, while a finely pointed tip minimizes friction for maximum rotation time.…
Updates: 2026-10-07 Updated V2 for much easier priming. 2026-09-24 Added 3 V2 variants that print without support. 2026-07-05 Added a version with looser barrel fit. 2026-07-03 Added a version with looser clip; print this if you think the…
This model is a plastic print-in-place bearing. It spins very well just off the print bed! Though you do have to peel a small support ring out before spinning, if you don't it wont spin smoothly.
A small print in place carousel. I designed this for fun, and to learn more about designing print in place connections and mechanisms. It prints upside down, without supports. After printing, the ponies hang from the outer ring, which…
🟪 UPDATE 3.8.2026: A new version has been added, featuring a top and a movable bottom plate. So two parts need to be printed here. The bottom plate is guided along an axis and pushes the darts completely out of the speedloader into the…
This is a Print-In-Place Fidget Spinner that can be printed in 30 minutes with no support or brim. See it in action here: https://www.youtube.com/shorts/KquWtkoWrpA Settings- Supports- no Brim- no Infill- 15% Slow mm/s on top layer Good…
da meine Wäscheklammern meine Wäsche im Wind ab und an nicht standhielten mussten stärkere her ! Und siehe da nun kann Wind um die Wäsche wehen und sie bleibt auf der Leine …
I borrowed my sister's Hoover carpet shampooer and noticed she had lost one of the caps to the water tank. I found a similar replacement cap at www.thingiverse.com/thing:4546785 but it was for cap with only 3 prongs to secure it to the…
A fun little fidget toy and it looks so satisfying when you spin it
Full-Printed Barrel with Integrated Adapter 🟪🟧 170 mm or 120 mm length X-Shot Spinshot / Break Barrel 🟦 no additional hardware required 🟦 prints in one piece (without supports) 🟦 barrel inner diameter: 13 mm or 12.9 mm 🟦 barrel length:…
A small basket I made to hold my clothespins. Inside dimensions are approximately 230x130 mm with a height of 60 mm. Printed with PLA on a size of 0,2mm nozzle diameter. --- Don't forget to check my newer version of this basket here .
Please click if you appreciate my work :) Clothespins for 3D printing Print with 4 layers of walls, Layer Height: 0.3mm Use PLA Gcode for: -BambuLab A1 -BambuLab A1 mini -BambuLab P1P -BambuLab P1S -Prusa MINI/MINI+ -Prusa MK4S -Prusa…
Spin top: print them both as shown on the image with supports; then screw the handle into the spin top, then spin, spin, spin, spin... Did I mention that you can spin this thing? If you are able to print with dual colors on your printer,…
Recommend printing with PETG / PLA tough variants.
Decided to make a rocket, couldn't find a good spin rocket so I made one.. I haven't launched it yet.. It should work. Uses Estes 18mm B or C engines. Entire rocket with C6-5 weighs in at 3 oz and stands at 510mm (1'9+") Still a work in…
Front Sight - Color Contrast X-Shot Spin Shot / Break Barrel Front sight to get a color contrast with the dark grey rear sight. I've adjusted it that it would line up with the blaster’s stock rear sight.…
Features No hardware assembly No blaster modification No blaster disassembly Pre-Grouped prints for easier slicing Multi-Color printing (No AMS Required) Extended front end Lowered rail for better accessory placement Raised front iron…
Mini Mouse Clothespins Print Settings Printer: CR-7 Rafts: No **Supports:** No Infill: 10 How I Designed This =================== by fusion360 attached canvas Category: Fashion
Some say necessity is the mother of invention... Well, here there was only necessity because nothing got invented. :) The need arose when old clothespins' springs started breaking, but the metal clip was still perfectly usable. So,…
Your replacement for your clothespin with spring. Here it is, a replacement for your socks clothesline clothespin comptible with two types of springs (Circular and square one). Very easy and fast print also very tough. Recommendations V1…
Created for the Open Sauce 2026: Spinning Battle Tops Contest, 7 Deadly Spins is a modular battle top system inspired by the Seven Deadly Sins. Each sin has a swappable Weapon Ring , allowing players to mix components and create unique…
A spinning top that prints quickly and has long spin times. Print with 100% infill.
Introduction: I wanted to have the Spinshot become a backup shotgun of sorts, so I decided to make this. I would NOT recommend yanking the front up, as the shell would just eject itself. Not saying you CAN'T. You will need to remove the…
This project requires 3D printed parts, tooling, and hardware. Below are links to everything you may need to buy, as well as instructions. Amazon Purchases Soldering Iron Station - $39.99 - https://a.co/d/08u09jfh Heat Set Insert Tooling…
Same installation as my original cylinder with needing to remove the L shaped bracket piece (3rd pic). To rotate the cylinder, you'll need to pull the BCAR down while the barrel is in its open position and rotate the cylinder with your…
Dustfilter for Filament with clothespin spring
Update 9/20/26 : Added new extra tight (12.75mm) and extra loose (13.15mm) dart tolerances and a fitment test. Print the fitment test first to find the best option for your darts, filament and printer. Files with pre-grouped inserts have…
Hello Everyone! This is a picatinny stock point made for the X-Shot Break Barrel/Spinshot. After getting my hands on this blaster and seeing that the area in the shell for the hammer looked like it was larger than it needed to be, I…
Home Depot sells this stretch wrap: https://www.homedepot.com/p/Pratt-Retail-Specialties-5-in-x-1000-ft-Stretch-Wrap-5005001/202029371 Pratt Retail Specialties 5" x 1000' It's fine and relatively inexpensive, but the handle is deeply…
Use paint-on supports. Paint them only on the underside of the keystone at the top of the archway (See photo with 3D printer showing the support). Use "enforcers only" support mode in PrusaSlicer so supports are only generated there. The…
Xshot Spinshot/Break Barrel Rifled Barrel Replaces the old Bcar for better fps with rifled barrel accuracy! If you would like to support us, check out our shop, https://foamproarmory.etsy.com . Want more FREE mods? Subscribe to our email…
This is the first design I publish and the second ever made in my life, so every comment and suggestion is welcome! As title says, is a pratical solution i needed to design for myself because i don't have a near place to store my…
The Top That Deliberately Spins On Its Side Most self-righting and tippe tops want to stand up on their stem. This one does the exact opposite — on purpose. When you give it a good spin, it searches for its own stable axis and settles…
this is a top that spins for a very long time and it stays in the same spot infill;25 or up (the more the better) supports: turn the top upsidown and use supports
basic yet complex and fun. adjust size to your liking, print 2 as is, put the balls together, then place in side one half of outer ring, then make the outer rings one. i print in abs and use acetone to smooth and abs/acetone mix as glue.…
I've added a note to each part file designating how many of it you should print. I printed this with 15% infill and no supports. I'd recommend printing both cap types and a back foot + their tolerance test equivalents to ensure everything…
This model converts the X-Shot Spinshot (Barrel Break) to a single shell blaster (I tried to make it 6) with a simple drop-in cylinder and some blaster surgery. If you enjoy flinging shells out onto the battlefield, then this is the mod…
Metroid Morph Ball Keychain (Spins!)
I created this model using Onshape
Clothespins hook For alternative uses Ideal for hanging socks but also other things such as paper sheets, photos, etc.
3D printable clothespin Do not align the seams over the spring ring Material: PTEG Supports: Yes Walls:2 mm
Update 9/23/26 : An updated version of the extended barrel threaded muzzle has been added to the files. Thank you to CJ Martin for bringing the issue to my attention! Faux suppressors with varying dimensions have also been added to…
Simple mod of the original to enable fast loading of the X-Shot Spinshot. Saved as 3mf file, as it was created directly in the Bamboo slicer and there was an issue with the negative parts, so I could not save it as stl. Not all screw…
Basket for clothespins. Print Settings Printer Brand: Flsun Printer: Flsun Super Racer **Rafts:** Doesn't Matter Supports: Yes **Resolution:** 0.2 Infill: 50 How I Designed This =================== Freecad Project in download section…
Quick and easy print that adds a bit of comfort to the t-pull using a trimmed mega dart. Cutting guide included in the files and you'll need a good utility or razor blade for a smooth cut. Caps should friction fit tightly over the…
My wife and daughters use reusable cotton pads, so I looked for a solution to dry them easily without them falling off t
I have a Vileda XL clothes air dryer that features tubes/rails instead of clotheslines, and I couldn't find any pegs online or in stores that are wide enough to fit. Additionally, the dryer features an extendable design, allowing for two…
Quick and dirty phone stand a friend wanted. See the BB lazy Susan at https://www.thingiverse.com/thing:1953369 for assembly instruction. 11/8/2021: added SpinStand for "Fat Phones". 11/10/2021: added "SuperFat (14mm) and base only stl…
If you have an radiator like i do, you can use this little thing to dry your cloths.
Hello! I used support generation, for heart axesl. I wish you a good day !
Design Concept This spinning top is designed to rotate with a pen tip or string as its pivot point. Featuring a vibrant color scheme, the model is not only eye-catching but also enhances interactive fun for players. Usage Suitable for…
These are replacement spinners for the Adventure Force Spinshot or Buzz Bee Spinfire. One model is the more traditional design out of the box and the smaller version simply removes the bottom for ease of printing requiring no supports.…
This basic creation is a pen holder that is able to spin.
Fit for the wire is 2mm thick, the circle size is 16mm.
Design Concept This spinning top is designed to rotate with a pen tip or string as its pivot point. Featuring a vibrant color scheme, the model is not only eye-catching but also enhances interactive fun for players. Usage Suitable for…
Drink Packet Holder/Organiser rotates\spins a place to store and sort your drink packets, added to water the base has 12mm ballbearings so it spins, i used 9 but room for several more print to match your kitchen color, office or break…
Huge thanks to Gemeneye for the amazing model I got to remix. Hardware: 2x m4 30mm bolts (Pan head or button head are best) 2x m4 nuts If you would like to support us, check out our shop, https://foamproarmory.etsy.com . Want more FREE…
A rail for clothespins, instead of a bag or pouch. Clips to an IKEA JÄLL drying rack and others. Recommended print settings Supports are optional. If your filament droops a lot: enable on build plate only and uncheck remove small…
you can spin it so the phone screen faces you or whatever you what it to face 92g aprox infill: 20% use supports on the holder i know i has flaws, i will be making a v2, so if you want to leave suggestions on the comments feel free to do…
Hello! I used support generation, for heart axesl. I wish you a good day !
A quick print kids and adults both end up playing with: twist the knurled stem between finger and thumb and drop it. The weight sits out in the rim, where it keeps the top spinning. DETAILS • Classic (48 mm), Saucer (60 mm) and Gem (an…
A spinning top with a party trick: an 80 mm ring sits on three hair-thin spokes around the handle. Once it's spinning the spokes disappear and the halo looks like it's floating. The heavy ring also stores energy, so it keeps going.…
This project took awhile to get right. The parts should print well, supports will be needed for the base and the magnet sorter base. There is a demo video linked below that also includes detailed assembly notes. You really should watch…
THIS MECHANISM SPINS ITSELF FOR YOU (or not. your choice) I don't know what came over me to make this but it mostly works so here, have this! Planetary gear mechanism I made (that this stand is made for) here ASSEMBLY INSTRUCTIONS Import…
A simple recreation of the post that drives the Hoover FloorMate SpinScrub brush head. Use the existing screw to install. The screw hole is a little bit too small perhaps, and the drive hex is a 0.5mm smaller across the flats as well but…
Keep Your Clothespins Organized! Say goodbye to scattered clothespins! This practical and stylish Clothespin Container is designed to keep your clothespins neatly stored and always within reach. Perfect for your laundry room, balcony,…
Design Concept This spinning top is designed to rotate with a pen tip or string as its pivot point. Featuring a vibrant color scheme, the model is not only eye-catching but also enhances interactive fun for players. Usage Suitable for…
Assemble: You gonna need to print: 1x Ball bearing holder , 1x Spindle , 1x Storage cylinder and 2x Game Pieces Set . Printet with 15% infill and 0,2 layer height, every model is easy to print. No support needed! Additional 1x 608 ball…
Intro A clean and elegant twisted spinning top that spins incredibly long and stable . Perfect as a small desk toy, fidget, or simply a beautiful kinetic object. The twisted body is not only a visual highlight – it also helps to keep the…
Assemble: You gonna need to print: 1x Ball bearing holder , 1x Spindle , 1x Storage cylinder and 2x Game Pieces Set . Printet with 15% infill and 0,2 layer height, every model is easy to print. No support needed! Additional 1x 608 ball…
My take on Stele's Spin'n'Squeeze Fidget Toy concept, both remixed from NAM_3's Fidget Squeezer . Now with print-in-place spinner handles and assisted alignment while squeezed, resulting in more comfortable grip, less friction and a lot…
Medieval Art - People - The Great Wheel Spinster 3D printable model.
Clothespins for use on clothing, fabric, or paper. Also works great for food storage bags like bread, cereal, chips, frozen foods, and more. Designed with stabilizing fins which are only visible when the clothespin is open. Each assembled…
![Balcony clothespins basket with room for socks and underwear [UNIVERSAL] (Customizable)](https://media.printables.com/media/prints/953672/images/7301122_ada3649f-0429-46c7-9ff1-eb942971f5f5_dc4a6078-76d7-49e8-aa45-3acffcd92e25/img_20240729_071507.jpg)
