Counting matching models…
Update 2023: Check version 4.0 of this design here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Version 3 of my old Design:…
I saw that nobody made any low profile squashball feet for prusa mini so i did. The design is inspired by some other creators, with my own spin. Legs are push to fit, so no screws or bolts needed. i recommend printing 4 feet total for…
Remix of the Prusa core One feet v2 to attach Squashballs for less vibration Printed it in PETG, more then 5 perimeters and gyroid 25% Thanks to PrusaGuy/David! Awesome design.
Print cup side upwards to use minimal supports. I'd recommend 3 walls and at least 20% infill for strength. Get yourself 4x 2 yellow dot squashballs (these have the best damping properties) and simply jam them in to hugely reduce noise…
Check the latest version here: https://www.printables.com/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40 Yet another SquashBall MK3S/MK3s+ vibration Damper, I had 3 design objectives: Damp the nasty vibrations caused by the…
Wanted to put my upgraded Mini on Squashballs for noise reduction. I didn't modify the inserts to continue working with the USB drives and USB port since i did not use those features and had some trouble with Fusion360, so i just made…
I'm a huge fan of this design. It really does quiet down the Mini, quite significantly. However, I was having issues with the back foot coming off every time the printer was moved. I.e. removing the print bed, inserting the memory stick,…
if you love like me the Vibration damper system from Rui Carmo ( https://www.prusaprinters.org/fr/prints/59947-new-version-squashball-mk3smk3s-vibration-damper-v ) and if you also love the Side drawers from djedje_zr7 (…
Support needed. This feet is suitable for LCD + Hyperpixel 4" touchscreen
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
I wanted to silence my printer even more by putting four squash balls under my concrete paver. Therefore I took these ( https://www.prusaprinters.org/de/prints/17995 ) feet and cut the Pin off and added a Rectangle. Print instructions I…
Vibration dumping squash ball feet's for Ender 3/PRO/V2 printers. Depending on your printer you may wish to print 4 standard feet's or 2 standard and 2 PSU feet. PSU feet has additional recess for PSU cover (tested on Ender 3 V2) Possibly…
I have a larger einsy case mounted to my mk3s and therefore the original profile holder did not fit my printer. I solved this by adapting the original profile holder to fit on the back (or front) plate of the printer instead of the alu…
The Prusa Mini Base Squashball Legs version has the balls cutting through into the bottom hexagon on each leg. I did not like it, so I designed hexagons with solid top and an edge adjusted so it does not push on the ball. They can be used…
Un remix de https://www.printables.com/fr/model/526044-prusa-mk4-bin moins long, plus haut pour passer entre les pieds en balles de squash de https://www.printables.com/fr/model/447434-squash-ball-mk4mk3smk3s-vibration-damper-v40
This is a REMIX of the Prusa mini squashball back foot redo/fix Remixed it to use it with the Raspberry Pi Z-Box Integrated 4B Case for Prusa MINI (REMIX) Print instructions It is a tight fit, make sure your printer is well calibrated if…
Summary: Facts: Dampening feet through the combination with squashballs Perfect fitting for Ender3 Printers, could also fit Ender3 like Printers Side mounted at the 4040 Aluminium Extrusions Low build height ensured through side mounting…
Lots of these out there, many were just not right for what I needed so I quickly designed a simple one to meet my needs. This was designed for my Two Trees SP-5 but should work for any printer that has room for the 25mm diameter base that…
Practical stands for the CoreOne. The stand without a switch can be mounted on any corner of the CoreOne. The stand with a switch is available in two versions: left/right. For feet with a switch, an additional M3x10-20 screw with nut is…
Ich habe einige Dämpfer für meinen MK3S ausprobiert und auch neue entworfen, die Schaumgummi genutzt haben. Eigentlich haben alle ihren Zweck erfüllt den Drucker leiser zu machen. Wenn allerdings über längere Zeit Filamentspulen auf dem…
( Full video ) I added tons of weight to my printer rack, but the X1C still shook everything when fully going at it. Printing on the prusa mini standing one shelf above was not possible while the X1C was running. Decided to give the good…
Please leave a Like :-) Just my Design for a Shock Absorber Feet with 2 yellow Dot Squash Ball. 1.2 Wallthickness and 30 % Infill is stiff enough for my Printers. On FLSun I had to free some Space because of a Screw - Sapphire and JG…
Shock Absorber Feet with 2 yellow Dot Squash Ball. I have been using this design for years on the bottom of my Prusa/Pulse, but I needed them a little taller for room underneath the printer. These should fit just about any printer out…
Due to the excessive vibrations from the U1's acceleration, dampening with squashballs has been a great addition (and also slowing the Z-hop to 200mm/sec from 500mm/sec+). All recalibrations performed for vibrations/alignment worked as…
Designed these for a makeshift turntable isolation platform (using IKEA Lämplig cutting board). The feet house cut-in-half squashballs. There's .5mm clearance in the XY-direction, so dimensional accuracy of your printer shouldn't be of…
It seems that the electronics box of the MINI+ is just a bit wider than the regular mini. As such, the original model doesn't fit anymore. I simply widened it a bit so it fits again, works great on my model.
Printed with PETG, I think I used a gyroid interior. Modified the original feet to be solid thru and thru then added a 40 mm negative volume sphere 26 mm from the bottom. This holds the balls in. The original squashball feet came from…
Practical stands for the CoreOne. The stand without a switch can be mounted on any corner of the CoreOne. The stand with a switch is available in two versions: left/right. For feet with a switch, an additional M3x10-20 screw with nut is…
this is a remix of the original low profile feet for v-slot https://www.thingiverse.com/thing:3385254
Remade the design to get rid of artefacts in the faces, provided is the f3d and step (use the .step for printing)
I found a lot of different squashballfeet, but I wanted one to match the design of the printer, so I designed one on my own. No tools for mounting needed. I printed it in PETG and starting from 25,2mm I switched to FLEX to make the…
This anti-vibration foot is based on a squash ball and can replace the original feet. Just replace it and use the original screw. Print Settings Printer Brand: Creality Printer: CR-X Rafts: No Supports: No Resolution: 0.2 Infill: 50%…
A feet designed for the Prusa Mini. The feet fits normal squashballs and can be simply clicked anywhere into the 30mm aluminium extrusion.
Dämpfer / Damper Squashball für / for 40x40mm Profile
remix of a popular Z-Axis Support Brace to work with my feet design. print this if you have printed my squashball feet and want to have z support brace together with a foot right under it. 2 parts printed separatly to make it an easy…
support squash Ball avec extension USB Print instructions avec support 0.2 mm
I remixed the camera arm mount to fit the inserts from my squash ball base. Also manipulated the camera case to make my
A Remix for the original cable cover if you have installed the squashballmod.
This is a remix (same license as the original ). Thin walls are added to the holder's base triangle so that it does not fall off when printing in PETG. The profile needs to be filed for assembly anyway, this consumes less plastic than a…
This is a magnetic box for three squash balls. The magnets are embedded in the print so you have to configure a pause at Z in your slicer. You'll need additionally: 8x3 mm Magnets (6 pieces) Make sure you've checked the polarity before…
This is a remix of a couple persons (Kami & Daniel) prints. I have several reasons that I'd like to share: I prefer the squashball feet on the Prusa Mini printer as they decouple the noise from the desk\table a great deal and make it much…
