Search results: ssg

Lego Compatible (66964.dat) Minifig Sword Greatsword Pointed with Upturned Crossguard

This model is compatible with the lego system.

Ohio class SSGN

Model of an Ohio Class SSGN

Suppressor/Silencer for SSG24

Hi, thanks for downloading my file! I made this suppressor/silencer for my Novritsch SSG24, because the one Novritsch sold on his website was a bit too expensive for my taste. How it's made This silencer is made up of three easy-to-print…

Lego Compatible (18034.dat) Minifig Sword Roman Gladius with Thick Crossguard

This model is compatible with the lego system.

GBB or SSG10 A3 handle grip

Remix of AR15 grip to fit the GBB or SSG10 a3 handle. Just measure your mount, it should be around 10mm (check the attached picture) Category: Toy & Game Accessories

USM Haller Key for Lock handle (Schlossgriff)

English: I thought it would be useful to have a key that doesn't scratch the chrome on the USM Haller products and that allows the simple "lock" to be locked. This is useful so that small children cannot open the furniture or curious…

Magazine Release Guard for the Novritsch SSG11

This is a magazine release button guard for the Novritsch SSG11. It reduces the chances of you dropping your magazine when holding your rifle, as the button protrudes and is easily pressed on accident. Print right side up with supports. A…

Samsung Active 3D Glasses Frame SSG-5100GB

Frame for Samsung Active 3D Glasses Frame SSG-5100GB. No support. Just put glasses in the frame.

Brief Schablone Brieflehre Messgerät für Größe / Dicke der Briefe

Briefschablone mit praktischer Info zu den Abmessungen und dem Gewicht der einzelnen Briefgrößen. Druck einfach stoppen bevor der Text kommt und das Filament wechseln.

SSG10A3 front rail

A front picatinny rail for the Novritsch SSG10A3, or the MLC-S2 Skeleton Stock from maple leaf in general. Also added the .f3d (Fusion) file, in case someone wants to remix for example the base of the model. I printed it on my prusa…

over barrel SSG96 suppressor (for US orange tip)

an over barrel suppressor that screws onto your long barrel US version (not sure if it fits short barrels versions) of the Novritsch SSG96 orange tip.

Extended Handguard for the Novritsch SSG11

This is a extra -extended handguard extension for the Novritsch SSG11. It reuses your existing mounting hardware, and wraps around the barrel for a secure fit. Print with the screw holes facing up. Mirror for the opposite side. Print as a…

Pedestrian Traffic Light - Ampel (fuer Fussgaenger)

Description Pedestrian Traffic Light Quick and easy to build - Snap fit - no screws needed Final dimension assembled: 4x4x15cm (LxWxH) Print No support Orientation as in the files Infill 15% Material: PLA Parts needed 1x WS2812 / Neopixel…

Lego Compatible (95673.dat) Minifig Sword Roman Gladius with Thin Crossguard

This model is compatible with the lego system.

Thicknessgauge: Easy Thickness Measurement from 1 to 10 mm

Thicknessgauge: Easy Thickness Measurement from 1 to 10 mm This handy tool is perfect for hobbyists and modelers. With the Thicknessgauge, you can easily measure the thickness of materials or objects, or use it as a template to better…

CS2 SSG 08 - Counter Strike 2 (Decoration)

Nothing to add, print and enjoy!

SSG96 picatinny rail

A picatinny rail for the SSG96 (not sure if you can use it for the SSG10's or 24's but you can try) this model slides over the barrel and clicks into the hole on the front of the stock, giving you a brand new picatinny rail to work with,…

Lego Compatible (37341c.dat) Minifig Sword Katana 3.5 L with Short Smooth Grip and Square Crossguard

This model is compatible with the lego system.

SSG Rank

This was for someone I know in the military. But I also thought I should post it here. IPT is for Inventor STL is for 3d printing Category: Signs & Logos

PB Swiss 8240/8242/8440 SwissGrip driver mounts for DDD Wall Control

DDD Wall Control tool holders for PB Swiss SwissGrip drivers. Rainbow Slotted Screwdriver Set PB 8240.RB Slotted Screwdriver Set PB 8240 Rainbow Phillips Screwdriver Set PB 8242.RB Phillips Screwdriver Set PB 8242 Torx Screwdriver Set PB…

Novritsch SSG11 Stock Grip Panel - M-LOK and STEP

If you're also waiting for the SSG11 skeletonized stock grip panels to mount your split bipod, or anything with M-LOK, you can print these panels as a temporary solution. They're of course not as stiff as the original CNC ones, but at…

Fussgängerüberweg

The parts are a little messy… But i used all of them and a lot of glue.

Staubsaugeradapter Kärcher WD 2500 M auf Makita SP6000 – passgenau, robust, ohne Staub

Staubsaugeradapter für Kärcher WD 2.500 M und Makita SP6000 Tauchsäge Beschreibung: Dieser Adapter verbindet den Saugschlauch eines Kärcher WD 2.500 M Nass-/Trockensaugers sicher mit der Absaugvorrichtung der Makita SP6000 Tauchsäge.…

SSG-10 A3 Hop Guard

A quick design i made to prevent accidentally changing your Hop-up setting on the SSG-10 A3.

Accessories lock suitable for sencor SSG 3505VT, SSG 3500WH mixers

Rotate the model 180° in the x-axis or y-axis and 3D print with supports. Please give a HEART for the download! We like to collect them. ;-) PRINT SETTINGS: Total time → 42 min Number of print files → 1 Layer height → 0,2 Layer width →…

3D printable electric gripper SSG48

The most up-to-date STL files can be found here! Github repo with SSG48 Files and building instructions: Link Assembly manual: Link Github repo with GUI: Link Documentation: Link SSG-48 adaptive electric gripper is a gripper based on…

novritsch ssg10 a1 wall holder

wall holder for ssg10

FPS Adjuster Rings for SSG10 Stalker Spring Guide

FPS Rings should be printed with at least %30 infill (I use Grid), and 3 walls. No raft or brim needed. ENJOY!! These are free for you to print, if you would like to sell them message me! I make all my models by myself and never charge…

Ventilation duct grille (Auslassgitter für Lüftungskanal)

Air vent grille for ventilation duct for 220mm x 54mm vent. Auslassgitter für Lüftungskanal für 220mm x 54mm Kanal

Wallmount for PB Swiss Tools - 8249 - SwissGrip Screwdriver Set

My new PB Swiss Tools - 8249 - SwissGrip set arrived and so of course I needed to model something for them. I also added four ballpoint hex to my set (PB Swiss Tools - 8206.S4-120/S5-140/S6-160/S8-180) so you will find those as well. I…

SSG10 scope riser for runcam

A scope riser for runcam attatchment

MLOK-ish Grip Panels for the Novritsch SSG11

This is a grip panel compatible with the Novritsch SSG11! It lets you add MLOK compatible accessories to your airsoft rifle. Print with the screw holes facing up. Mirror for the opposite side. Print as a set. Ironing is optional if you…

SSG10A3 Hole cover for left hand conversion

When converting a VSR10 airsoft sniper to left hand (e.g. with https://eu.novritsch.com/product/ssg10-left-hand-conversion-kit/ ) you end up with a hole where the bolt rested previously. To protect the internal from dirt and debris, as…

Novritsch SSG10/VSR10 straight pull bolt handle

I built this for the novritsch SSG10 but I'm pretty sure it will work on other VSR10 platforms. (let me know if not) It's worked for me for a while with me running an HPA setup. I don't know how it will run with a regular spring setup.…

Höhenmessgerät rip by mcka3ax40

Höhenmessgerät

ASG SSG 69 m4 mag adapter (Airsoft)

I have no idea how to model things, but I was able to modify this VSR-10 mag to fit inside the ASG SSG 69 using TinkerCAD. I used a screw from the BambuLab A1 Printer and a 0.5/0.6cm radius spring that is 1.5cm long. Apparently you could…

USAF SSgt Cookie Cutter

A United States Air Force Staff Sergeant (SSgt) rank cookie cutter. Not sure if this is the right depth to make a good cookie if you try it out please post a make of the cutter and the cookie! Category: Kitchen & Dining

Gewindeadapter von Kanistergewinde S60x6 (DIN60/DIN61) auf Fassgewinde 2" BSP

Die Gewinde sind nicht abdichtend, müssen es aber für diese Funktion auch nicht sein. Legen Sie den Behälter bei aufgeschraubtem Adapter nicht hin. Drucken Sie das Teil ohne Stützstruktur und orientieren Sie es mit der Sägezahn- Gewinde-…

High Republic Inspired Lightsaber With Fold Out Triple Crossguard

I really like the Golden Age aesthetic of the high republic and I wanted to capture that in a fancy looking and somewhat over the top lightsaber, so I designed this one which has a triple crossguard which is pretty goofy but I think it…

SSG96 Stock Extender / SSG96 Schaftverlängerung

GER: Ich habe mir kurzerhand eine Schafverlängerung für mein Novritsch SSG 96 gemacht, alles was ihr noch braucht sind zwei längere Schrauben. (M6 x 75 ca) ENG: Without further ado, I made a shaft extension for my Novritsch SSG 96, all…

Goku SSGSS - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Blue PLA+ Sunlu Sky PLA+ Sunlu White This print uses 4 unique filaments Swap…

Novritsch ssg96 wallmount holder

Novritsch ssg96 wallmount holder allows to mount the ssg at an angle

Multiboard Halter für Brenenstuhl Feuchtemessgerät

Ein einfacher Halter für ein Brennenstuhl Feuchtigkeitsmessgerät. Drucken mit 0,2 mm Schichthöhe und Supports. Zur Montage am Multiboard werden noch 2 Snaps benötigt.

HSW RODE WirelessGo II

I made a mount for the rode wireless go II microphones on the HSW wall because I couldn't find one, but I needed it. maybe it will be good for you too ;)

Crossgun turbo fan Skadis holder T-clip

Crossgun Air Duster Holder for IKEA SKÅDIS — T-Clip Mount Keep your air duster off the desk and always within reach. This holder mounts directly onto any IKEA SKÅDIS pegboard using the standard T-clip system — no screws, no tools, no…

SSG11 6mm (VSR ) to Odin Airsoft Speedloader Adapter

A quick remix from this SR25 adapter as I liked the bb retention of it . I did print the SR25 version and it worked very well! It's a quick rough remix so some side could have more polish but it works soooo xD Tested with SSG11 Novritsch…

Gehäuse für Energiemessgerät

Gehäuse für ein Amperemeter Voltmeter DC 6,5-100V 20A mit XT60E Anschluss. Verbautes Material: https://www.amazon.de/dp/B07M8T3T2C?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1…

Angle measuring tool for plumb bob / Winkelmessgerät für Senklot

English This box is designed for measuring angles while also serving as compact storage for a plumb bob. The front side features angle guide lines in 5° increments, making it easy to measure or transfer angles directly on-site. Inside,…

Test für Passgenauigkeit

Als kompletter Neueinsteiger wollte ich vorab testen, ob ich bei der Konstruktion eventuell ein Über- oder Untermaß erstellen muss um nach dem Druck sicher zu sein, dass bestimmte gakaufte Teile exakt in die gedruckten Teile passen.…

Blutzucker Messgerät+Zubehör Halter

Für das One Touch Blutzucker Messgerät ein Standhalter für Gerät/Piekser/Messtreifen und Ersatzpiekser im entsprechenden behälter. Für das Messgerät meiner Mutter , so findet man sehr schnell alles was man braucht!

Novritsch SSG11 TDC Hopup Guard

No hardware needed, designed to be press fit onto the existing TDC. Some force will be required, maybe light hammering. + & - indicators will require an AMS, but can be removed for non-ams printers. Only use PETG. IMPORTANT: select .12mm…

Wall Mount for PB Suisse 8123 SwissGrip (Violett)

Description The Wall Mount for PB Suisse 8123 SwissGrip (Violett) can be atteached to any wall using two screws. The slots are labeled and allow easy access and a firm resting position for the screwdrivers. Printing Would recommend…

Anschlussgewinde M36x4 mit Festool Anschlussmuffe für Elu MHB90 Bandschleifmaschine oder mit angepassten superschnellen Schnellwechselsystem von Peter H

Anschlussgewinde M36x4 für Elu MHB90 Bandschleifmaschine mit Festool-Anschlussmuffe oder angepassten superschnellen Schnellwechselsystem für Staubsaugeranschlüsse mit 2x 10x2 Magnete von Peter H Danke an Peter H…

SSG10 HOP UP GUARD

Abflussgitter Pool 175mm

Nachdem das Abflussgitter gebrochen war habe ich es etwas dicker nachgezeichnet. Passend für 175mm Abfluss

DIY Mini Vordach / Überdachung – Passgenau & Modular

Beschreibungstext Kompaktes Mini-Vordach für die Fassadenmontage Dieses Mini-Vordach schützt kleine Außenbereiche, Sensoren, Kameras, Steckdosen oder Türbedienelemente zuverlässig vor Regen und Witterung. Das Modell wurde in Autodesk…

Halter für Reifendruckmessgerät (oder andere Kleinigkeiten)

Mein Messgeräte für den Reifendruck lag immer im Regal rum. Jetzt ist es aufgeräumt ;-). In PLA mit 0,28mm gedruckt reicht völlig.

French Cleat Halterung für Holzfeuchtemessgerät PFMG A3 von Parkside

Das ist eine French Cleat Halterung für das Holzfeuchtemessgerät “PFMG A3” der Firma Parkside um diesen im French Cleat System verstauen zu können. Zusätzlich ist es möglich, die Anleitungen mit den Tabellen für die Interpretation der…

Wall Mount for PB Suisse 8400 SwissGrip Torx (Blue)

Description The Wall Mount for PB Suisse 8400 SwissGrip Torx (Blue) can be atteached to any wall using two screws. The slots are labeled and allow easy access and a firm resting position for the screwdrivers. Printing Would recommend…

Weissgauff induction stove leg

Weissgauff induction stove leg. Can be printed using PLA.

Batteriedeckel Rowi Druckluft-Reifenfüllmessgerät 102040067

Einfach ein Ersatz für den Batteriedeckel vom Rowi Druckluft-Reifenfüllmessgerät 102040067. ABS sowie PLA: bei Schichtstärke 0.2 ist die Lasche direkt abgebrochen. Schichtstärke 0.08 hat funktioniert. Eventuell könnte man es auch auf eine…

Crossgun turbo fan, nozzle & vacuum gridfinity bin

Description A 3x5x8U Gridfinity bin that holds the crossgun mini jetfan, its nozzle and its vacuum attachment. Printing I printed this on a Prusa Core One + using a generic PLA. I used a 0.6mm nozzle to print it, as it doesn't have any…

Ersatzkugel für Kugelabschussgerät

Infill 100 % von Daniel Schwarz

Novritsch SSG10/VSR10 straight pull bolt handle

I built this for the novritsch SSG10 but I'm pretty sure it will work on other VSR10 platforms. (let me know if not) It's worked for me for a while with me running an HPA setup. I don't know how it will run with a regular spring setup.…

SSG Dashboard Display DV-8 mounting bracket for Simagic EVO

SSG Dashboard Display DV-8 mounting bracket for Simagic EVO wheelbase.

Novritsch SSG11 Stock Grip Panel - M-LOK and STEP

If you're also waiting for the SSG11 skeletonized stock grip panels to mount your split bipod, or anything with M-LOK, you can print these panels as a temporary solution. They're of course not as stiff as the original CNC ones, but at…

MLOK-ish Grip Panels for the Novritsch SSG11

This is a grip panel compatible with the Novritsch SSG11! It lets you add MLOK compatible accessories to your airsoft rifle. Print with the screw holes facing up. Mirror for the opposite side. Print as a set. Ironing is optional if you…

Magazine Release Guard for the Novritsch SSG11

This is a magazine release button guard for the Novritsch SSG11. It reduces the chances of you dropping your magazine when holding your rifle, as the button protrudes and is easily pressed on accident. Print right side up with supports. A…

Extended Handguard for the Novritsch SSG11

This is a extra -extended handguard extension for the Novritsch SSG11. It reuses your existing mounting hardware, and wraps around the barrel for a secure fit. Print with the screw holes facing up. Mirror for the opposite side. Print as a…

Crossgun turbo fan Skadis holder T-clip

Crossgun Air Duster Holder for IKEA SKÅDIS — T-Clip Mount Keep your air duster off the desk and always within reach. This holder mounts directly onto any IKEA SKÅDIS pegboard using the standard T-clip system — no screws, no tools, no…

Staubsaugeradapter Kärcher WD 2500 M auf Makita SP6000 – passgenau, robust, ohne Staub

Staubsaugeradapter für Kärcher WD 2.500 M und Makita SP6000 Tauchsäge Beschreibung: Dieser Adapter verbindet den Saugschlauch eines Kärcher WD 2.500 M Nass-/Trockensaugers sicher mit der Absaugvorrichtung der Makita SP6000 Tauchsäge.…

SSG10 HOP UP GUARD

SSG10A3 Hole cover for left hand conversion

When converting a VSR10 airsoft sniper to left hand (e.g. with https://eu.novritsch.com/product/ssg10-left-hand-conversion-kit/ ) you end up with a hole where the bolt rested previously. To protect the internal from dirt and debris, as…

Thicknessgauge: Easy Thickness Measurement from 1 to 10 mm

Thicknessgauge: Easy Thickness Measurement from 1 to 10 mm This handy tool is perfect for hobbyists and modelers. With the Thicknessgauge, you can easily measure the thickness of materials or objects, or use it as a template to better…

60kg Servo Adapter for U-bracket DS5160 SSG

this is a new bottom cover for the big 60kg Servo DS5160 SSG to get a u-bracket as it is almost impossible to buy these servos with the right brackets, even though they are offered with them everywhere. when you receive the package you…

Star Wars Kylo Ren Crossguard Lightsaber

A basic 3d model of the crossguarded lightsaber used by Kylo Ren in the Star Wars sequels the model is designed to be easily printable

SSG Dashboard Display DV-8 mounting bracket for Simagic EVO

SSG Dashboard Display DV-8 mounting bracket for Simagic EVO wheelbase.

Gussgehäuse

first try with freecad :) nothing special

60kg Servo DS5160 SSG

this is a mockup of the strong 60kg Servo DS5160 SSG for further 3D constructions. it was not designed to be printed! I used it to construct bracket adapter like this :

SSG Access Card

Info: The card holder is made so you with ease can see your Card number id on the right corner. It is designed to also show the picture of yourself in the mittle. This holder protects your card from damage. Recomended Filament: PA-CF, PC,…

Mococo Abyssgard from Hololive

if you want NSFW versions join the club and text me

(Easy to Print) Full Picatinny Rail for SSG24

I bought the SSG24 and was a bit disappointed that I could not attach my favorite scope because the cutout was a bit too big for the fixations. I made this rail to go on top of the original rail, so you get to use the full length of the…

Bussgürtel/ Cilicium/ Spike strap for Pain Play

Printed with 50% infill without support. Fittet for a 25mm belt

SSG96 cap

a cap for your SSG96

Multiboard Halter für Schallpegelmessgerät

Ein einfacher Halter für mein Schallpegelmessgerät, passend für Multiboard. Druckhinweise: PLA, 15% Infill, Supports Montage: Zur Montage braucht ihr noch einen Snap.