382 models
Battery Missle Launcher for AAA and AA batteries This print is split into multiple parts so there are a few details you can print in a different color if you like. The .3mf's are already labeled in my suggested colors, I am looking…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
A simple cover for multiple socket outlets with standard switches. You need 2 M3x8 screws and some double-sided tape to attach. If you like check out my other designs too! Note: Since the question came up recently, the license states that…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Rosslyn Chapel Master and Apprentice Pillar.
Print approx. €6.81–€8.33 excl. taxPreliminary estimate for one variant
The vessles has an twist and lock mechanism and room to glue magnets in the bottom. Enjoy.
Print approx. €3.24–€3.96 excl. taxPreliminary estimate for one variant
car organiser , opel crossland
Print approx. €6.08–€7.43 excl. taxPreliminary estimate for PETGSource material: PET
Wer häufig eine Nasendusche verwendet, macht dies üblicherweise mit 0,9 prozentiger physiologischer Kochsalzlösung. Diese kann man teuer kaufen oder einfach selbst herstellen: 9 gramm Salz (idealerweise naturbelassen ohne Rieselzusätze)…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
The clips on Glasslock lids break off after a while, as all “ living hinge ” designs eventually will. Rather than throw away the lid, use these replacement clips. I have two clips here. One for square or rectangular containers, and one…
Print approx. €0.41–€0.50 excl. taxPreliminary estimate for PETGSource material: PET
If you have allergies or nasal issues rinsing your nose with a nasal shower can really help. The plastic showers from the pharmacy are quite cheap, but the salt they sell with it comes with a lot of packaging waste and is 25x times more…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Innenecke und Endkappe links rechts für Arbeitsplatten-Wandabschlussleiste von Tedox
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
A more convenient replacement lid for the Ikea Kvissle cable management box. This design solves three problems with the original cork lid: Cork sucks. It degrades over time, leaves crumbles behind and can become a bugs nest. Passing…
Print approx. €7.17–€8.77 excl. taxPreliminary estimate for one variant
T-Slot covers for the crossslide of my Emco Maximat Super11 lathe. Crossection od profiles measures 11 x 13 mm and have various length. This set fits for my position of the compound rest. Length changes when you change position of the…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
Taca do Pyssla lub innych koralików służy do segregowania kolorów i później do łatwego brania odpowiednich koralików. Nic nie rozsypuje się po stole. Kilka pudełek można łatwo ułożyć w stos i schować by później wrócić do układania. The…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
I used PETg, but PLA is OK as well 0,2mm Layer Height Placed on the flat spot to get best straight
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Bene-Gesserit Vessle
Print approx. €4.66–€5.69 excl. taxPreliminary estimate for one variant
Just a really fashionable pair of sunglasses without any lenses. Glasses can be seen on Instagram: https://www.instagram.com/p/CH3SW2lnlWS/?igshid=irk68767k4e3 Print instructions if (you want to print glasses with infill pattern instead…
This is a remix for the pusher and breech of the Smiley blaster, so it now doesn't need any brass for the breech. The only added hardware is 2x -012 o-rings, for the tip of the ram. You DO need to lubricate the o-rings at the tip of the…
Ever find it difficult to punch stitch holes in leather? Or afraid that you make too much noise hammering your fork punch and disturb your neighbours? PRESSLY can help! Using its arbour press style rack-and-pinion mechanism, you can…
Introducing the CapClip – your ultimate companion for outdoor adventures! Designed for hikers, campers, and all explorers alike, the CapClip revolutionizes how you carry your favorite hats on the go. Help me create more FREE models! If…
A script for generating customized bases for pyssla/perler beads. I didn't bother to eliminate overlapped walls so I fixed all stl files in 3D Builder windows app. STL files are generated on 5mm grid (works well with Ikea's Pyssla beads).…
Updates: 2023-03-25 Added Top Grill with flat surface (no power button cutout) Added Body with smaller cutout for flat IO panel mainboards (note: this only works for mainboards that have no protruding border around their IO panel. 99% of…
Remixed to hold AA and AAA on both sides
CHECK OUT GEN II: https://www.printables.com/model/394065-double-stack-speed-loader-gen-ii This is a speed loader/Thumb saver for loading double-stack 9mm Glock 17 magazines. Project files include the parameterized fusion project as well…
Reproduction of the Apprentice Pillar inside Rosslyn Chapel. Reduced polygon count so you can import it to Tinkercad. Category: Scans & Replicas
Remixed the original design to have a better axle and handle attachment system. Also, include Fusion360 file.
Put your precious valuables in this over-engineered box. Print settings: The lid will need supports on the inside.
This sink strainer is designed to make your life easier. It effectively blocks food particles from passing through, while still allowing water to flow freely. Plus, it's easy to clean! Are you tired of constantly having to unclog your…
Snap-on Hook. 8mm wide, 3mm thick. Tested with PETG 0.3mm, 100% infill. I've built a Lack Tower for my Prusa i3 MK3S+, and found out Mosslanda Picture Ledge has 55cm width which is identical to Lack Table, so I screwed the ledge on the…
While Silly's alternate pusher does clear nightingale magazines as advertised, its a little tight compared to the original. I spliced on the sealing version of Silly's pusher to the body of the original design to let magazines drop…
Like my other two versions (the picture shows actually the TBS SourceOne version) an antenna mount for the 2.4GHz ExpressLRS T-Antenna. The holes have a diameter of 5mm and the distance (center-center) is 24mm. Should fit on the standoffs…
This print is split into multiple parts so there are a few details you can print in a different color if you like. The .3mf's are already labeled in my suggested colors, I am looking forward too see your color scheme! Assembly is pretty…
This is my version of the Deutsche Bundesbahn red light train lantern fitted to the end of goods trains exetcuted in gauge 1 (Spur 1 / 1:32) For illumination of the lamp, I've ground the end of a 5 mm red LED flat. It fits perfectly in…
A 45 Degree stand for your SSL 2+. Remix of Asuka Kurashina's model.
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I designed this adapter since I wasn't satisfied with the online available ones. I am using a Nazgul5 V2 with its XL5 V5 frame and an ExpressLRS 2.4GHz T-Antenna by HappyModel. To get the antenna into the printed part you might have to…
I liked the changes that @titleunknown_285431 made to the Pressly by @Wallnutts_278875 , but I didn't have a heat-set insert for the ¼" bolt and I didn't feel that a single slot for the punch tines would work well for my purposes. I also…
don't know what batteries it holds
This is an remix of zbutt 1u No Hassle Container for 1 slot Other print can check it at: https://github.com/imyownyear/Z
two types of antenna mounts ExpressLRS
Printed template for DIY small 868MHz / 915MHz antenna. Total size 26x6mm alternative to 160mm dipole. Use 0.7mm wire to make the antenna spring. Use coaxial IPEX4 antenna cable, solder active, central wire to the spring (no passive part…
Simple miniature picture shelf. Print layer height: 0,15 infill: 15 % orientation: normal supports: none
Zur Dosierung von Fischfutter, Dünger, etc.
Old-style Ekornes chairs had plastic friction matings on each side that allowed the chair to recline smoothly. The parts would break, though. This part replaces each half of the pair that were mated behind the knob. Make sure to sand the…
This is a single piece remix of the awesome AA battery launcher model. No need for assembly anymore, just print it and use it. You do need supports though. I recommend using paint on supports as per the second image, with "snug" support…
Messlöffel - Measuring Spoon - 45ml
2 Year Update! I've been traveling in my camper van full-time using this aeropress station on the roughest roads from the tip of Baja to the Arctic Ocean! This print has held up, keeps things from flying out and keeps all the rattles and…
A cable holder with which the cable can be routed along a baseboard. Designed for cable with 7mm diameter. Designed in Onshape:…
Mit dem Halter kann die Spülbeckenabdeckung im offenen Zustand arretiert werden, um ein versehentliches Zufallen zu verhindern. Der Halter besteht aus 3 Teilen. Das Unterteil wird mit einer kurzen Holzschraube an die Wand über dem…
Less material overall, less space between dividers, larger cutout at the bottom. Current version fits 4 lids. I plan to refine more to better fit Glasslock branded lids and add the larger version. I printed with a 0.6mm nozzle.
Basic mount for the T style 2.4GHz dipole antenna that comes with the Radiomaster RP1 & RP3 ExpressLRS receivers. This design uses M3 heat set inserts with a hole spacing of 29.5mm & is designed to mount flush against a 3mm thick piece of…
I designed a mosslanda end cap to prevent things from falling of. The cap itself is snug fit so its pretty tight. The best way to assemble it is from the top. Printed in 0.2 res and with white PETG.
These are orientations I have made in order to fit this project easily onto a 220x220 built plate and save you the time
elrs vertical mount hole is 6.1mm length 25mm you can modify it
A small and lightweight mount for the 2,4Ghz Happymodel antenna on the BabyApe Pro.
Printed on the Prusa Mini with E3d Revo 0.8 nozzle and 0.4 layers. Used 3 perimeters for extra strength.
Einfache Halterung zur Lagerung von 4mm Messleitungen. Bei Version 2 wurde die Rückwand verstärkt.
This overlay is to keep all of your 25mm base models in neat order on your Ikea Kvissle paper tray that you are using to hold your minis. Print two of these and you can opt to put in 6x3 mm magnets to hold it down on the tray (not really…
Made after a design in a scroll saw puzzle book, the hexagons that make up this snowflake are combined into various shapes - but can you arrange them so they fit into the snowflake tray? There are 2 files for the tiles - one is already…
Headphone holder with a custom hook for the Ikea Mosslanda shelf. The shelf lip is ~12.7mm (~½ Inches), to fit snuggly, I designed the clip to be 12.65mm. There are multiple variants for different headphones sizes: Very large: fits…
Print them in TPU, I up the wall thickness / perimeter count until they are basically solid (4-5 walls).
Kärcher Zubehörbox Verschlusslaschen 5.326-008.0
So Happymodel Decided for the Bassline 2S to only release dimensions and not an STL File. The provided files are close to the dimensions of the stock battery holder. I use this for mounting in a little tightly: GNB 550mAh 2S 90C LiPo…
This organizer will hold the complete set of the Glasslock lids (set of 12). This is a single piece and prints without any supports required. The lid holder is 200mm long, 165mm wide, and 70mm high.
This is a extension for the 3way valve. It helps the water getting into the tray.
Ripped directly from the game files. The bottom is pretty small to support the entire model. I suggest printing a raft or a brim under the nuke. Category: Vehicles
This model prints in place without supports or assembly. To install, you may use the 4mm screw holes, or some two sided adhesive. Simply line it up under your desk and press firmly, no messing around with speed squares. This design…
I thought to myself, the included ammo in this toy is cute.. but what if I wanted something that might stick in a dart board? This pointy little missile is the result. Not guaranteed to actually break any sound barriers. Try printing at…
Tired of towels constantly slipping off your bathroom radiator? This easy-to-print, snap-on towel hanger is the perfect solution! Designed to fit radiators with 20mm pipes and 20mm spacing , this hanger ensures your towels stay neatly in…
Messlöffel für Kaffee und sonstige Dinge. Ich habe mir diesen Löffel für die Füllung von Trocknungsmittelbehälter designend. Die Größe kann je nach Wunsch angepasst werden. Über Like und ein Make würde ich mich freuen :) Viel Spaß beim…
Innen- und Aussenecken sowie Verbinder und Endstücke für Sockelleisten 20x40mm. Keine Lust gehabt für ein paar Gramm Billigplastik 3 Euro pro Stück zu zahlen, noch dazu war die Farbe nicht verfügbar, geschweige denn ein Mitarbeiter im…
File is created with 6.4 mm base color and 2.4mm top color. Recommend using 0.4mm nozzle with a layer height to match and a 30% infill if using basic PLA. FILES ADDED: created a stick that can be glued onto the back to make this a photo…
My Ekornes Stressless recliners were not holding in place well any longer. The issue was that the “pads” were worn out. Printer to the rescue. I designed these pads to bring new life to my recliners and I am so glad they worked! I printed…
I didn't want to pay 42 dollars for a model someone is selling so I had a friend make one for me and I'm sharing it here.
A remix of a remix to suit a remix? Took Sillybutts brassless breech chamber and extended it to suit flibby404's Talon Mag remix of the Smiley by Mighty Shrub. Prints the same as Sillybutts Brassless Breech and no aditional hardware…
Protection for frame and motor. Print in TPU there is two models to choose, the last one has more clearance between the TPU and the motor, it doesn't need supports. Remer to clean well and cut pieces of TPU stuck the inside walls, and you…
This is a collection of antenna mounts for the ExpressLRS 2.4 EP1 receiver from Happymodel that I designed to use in my TBS Source One frame, but I guess they work in any frame with 5mm diameter spacers. There are three options: Rear Vert…
It should fit for the frame. Couldn't try it myself, so I hope it works. ;) There are two versions. Their only difference is the orientation of the hex stand-offs.
Washing rice can be a hassle, especially when cooking small quantities. Not anymore! Place the tool on top of a soup bowl (mine has a 16 cm diameter). Add a cup of rice. Pour in water. Just enough to match the rice level. More would be a…
ExpressLRS Vertical Antenna Standoff Mount for Betafpv or AxisFlying antenna 4/5/23: Added a slightly shorter version Category: R/C Vehicles
This is an antenna mount for the 2.4Ghz ExpressLRS antenna for the GEPRC Smart35. It can be used on the back or the front, depending where you mount your receiver and the length of your antenna cable. It may work on other frames but it…
This design is a combination of the front and rear bumper for the TBS SourceOne V3 integrated with my antenna mount design for the Happymodel ExpressLRS ep1 antenna. This design is also a remix of the TBS Source One Accessories but this…
Hi ! I had to trace many lines at 7mm from the edge of wood pieces, it was boring.. I decide to design a simple tool used to trace (pencil tip up to 2.5mm) lines from the edge between 1 to 50mm (0mm wasn't necessary :) that's why it's…
Kleine Erhöhung für Dekoration im Ikea Mosslanda Regal. Habe für den Druck die Oberen und unteren schickten entfernt und den Infill auf 10% runtergesetzt. Ebenfalls kann der Druck beliebig in die Höhe skaliert werden. Small increase for…
Der Adapter ist so klein, dass Sie ihn nie wieder suchen müssen; er kann immer am Schlauch dran bleiben. Das spart auch eine zusätzliche Halterung. Der Schnellverschluss kann aber auch jederzeit problemlos abgezogen werden. Die 6…
Not asymmetric, use the correct cover for each side. Get the original parts to complete the build from here .
The hex-holes have a distance (center-to-center) of 32mm. Apex Evo Update(2023-01-05): I uploaded a new version of this design which has 30 degrees turned hex holes. (Especially for Mark and of course everyone else whose stand offs are…
Organizing your paint tubes can help you keep your workspace tidy and make it easier to find the color you need. Use a rack or holder can help keep your tubes organized and prevent them from tipping over. I needed mine to fit on a Ikea…
Happy Model Express LRS JR module enclosure. Clear Plastic LED 5V fan from Amazon . https://www.amazon.com/gp/product/B087Q8SDHB/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 I used a 5v voltage reg for the fan to avoid magic smoke…
This design is a mount for the small 2.4GHz T-antenna of an ExpressLRS receiver. Similar to my other design: TBS SourceOneV3 ExpressLRS The holes for the standoffs have a diameter of 5mm and the distance between them is 22mm.…
Hier habt ihr ein Türöffner für einen Ducato, Jumper etc. Der Originale Griff ist ziemlich kurz und relativ schwer zu betätigen, daher gibt es hier nun eine Längere und Stabilere Version. Gedruckt habe ich den Türöffner mit folgenden…
Simple hook to hang small things and clip to hang paper-cards at the IKEA Mooslanda pictura bar.
The well-known saying of Rabbi Nachman of Breslov, which means "My fire will burn until the coming of the Messiah." 3D model. Made with Blender. Common among Breslov Hasidim. If there is demand, I will make more products from it.
I love the coins from the game, I wanted some that were a little thicker and chunkier. The files provided are the exact same size as the ones provided in the game. For my coins, I increased the size in my slicer to 3mm thick instead of…
T-Lineal 1mm Einteilung Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.2mm Infill: 25% Filament: Renkforce PLA whatever Category: Hand Tools
I made another version of the field for a compact chess set. Here, as in previous projects, everything needed for the game is collected in a small volume and the kit is completely printed on a printer. In this chess, as in the previous…
I created this for my stressless chair after noticing that only paid options were available. If your chair resembles the one in the photo, the gliders are likely to fit. There are two on each side, making a total of four for a single…
Capybara Stressless – The Ultimate Chill Companion 🛋 Take a deep breath and relax… because this laid-back capybara has already claimed the comfiest seat in the house. Supports are needed. I used organic-style supports, which peeled off…
Neuhofer parts Parts for Neuhofer clik-fix 17 and FU123C Edge1: 46x46mm (20mm space to wall, 6mm fixation, 20mm overlapping) Needed material: nothing History Version 0.1.0 First published version and currently in use. Print instructions…
