Counting matching models…
Update 2024: Download my new "SMG MK2" design here: https://cults3d.com/en/creations/fast-smg-mk2-vr-gunstock-quest2-quest1 UPDATE 2022: Finally compatible with Quest2. You just need to reprint the bottom body…
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
Stock, the oculus quest does not fit me very well. If I pull the band low enough to keep it from slipping off, there is a huge gap at the bottom of the headset. This allows me to have a very good fit with no gaps and keeps the headset…
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
I created this model to easily hang my Quest 3 and its controllers on the wall or under a shelf. Print "WallMount and WallMountNose" or “UnderShelf” You can use an infill of 15%. It does not need supports. The model is designed to join…
This is a replacement clamp/clutch piece for the ProLine LST2BK speaker stand, which has an outer tube diameter of 38mm (lower part of stand) and an inner tube diameter of 35mm (upper part of stand). There is an M6 nut and bolt that clamp…
I created meanwhile a parametric design: Stromer Mudguard Extension V8 - ST2, ST3, ST5 and ST7 The front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is a little too short for rainy road…
The original part (yes, it is called “ front base tube button side ”) on my wife's ST2 was lost because it obviously didn't hold properly from the start and simply fell out somewhere along the road. That's why it didn't make sense for me…
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
Remix of the popular dust2 model by Frenzaih, updated to print better and (in my opinion) be slightly more accurate. Print without any supports, resolution 0.15 seemed to come out nicely. See my collection for other Counter-Strike maps,…
Edited 10/5/24: QUEST 3 VERSION AVAILABLE Cool new Features! Made this grip Quest 3/Quest 3S compatible (Grip LED, Geometry Changes) Added a belt hanger assembly Added a knuckle strap battery door Added a knuckle strap Backwards…
Spare parts for Autohelm (now Raymarine) AH800, AH1000, AH2000, ST1000, ST2000 tiller pilots. One version of the end plate is constructed without provisions for an o-ring. Original is with o-ring. Groove depth is chosen a bit shallower to…
Snaps on the Quest2. Push forward to reveal the power button when you mean to press it.
I bought Some Dell monitors and used them for some time. Eventually I got a mount, so I could have a 4 monitor setup. These didn't have VESA mounts, so I was looking at replacing all my monitors. I decided to model an adapter to fit on my…
I initially started designing my own 200x200x370mm version of this but then came across 3DCatts SFF Mini ITX Steam Machine Case v2 Airflow and they had nailed the design and was only a few centimetres bigger than the design I was working…
3x1 gridfinity bin that fits PST and PST2, you can stack other bins on top when it's not used.
The trigger on my dumpster-dived weed eater broke, so I put together a replacement. Seems to work fine. 4-5 perimeters with PETG seems to give decent flex for the return piece, though I have only used to it a couple of times so far.
dust2 cs2 model not printable
Disclaimer: Due to the recent incidents (things appearing on ebay) I just want to make something very clear: I do not allow any commercial use of my STL-files, my designs and my photos! Description: I was tired of using the crappy…
design to raise to of tank to match frame of MTS
Compact two-part enclosure for the ST2VGA adapter by Sidecartridge . Protects the PCB and provides tidy access to the VGA connector, the 3.5 mm audio jack, and the slide switch. What this is An enclosure sized to the ST2VGA board so you…
A little clip to retain your usb cable to your headset
This is replacement console hinge for st204 Toyota Celica printed in petg 50% infill
2x2 Gridfinity bin for Bernzomatic ST2200 with magnet holders
Build with PLA 0.20mm 0.4 nozzle 40% infill + support everywhere Print time: 17h44m
As someone with hand tremors, VR can sometimes be frustrating. To solve this I designed these wrist braces to combine with the well designed "NoobTube" quest2 controller cups. They work exceptionally well for me, so hopefully you might…
I recent got some Low Profile batteries and obviously they are quite a bit thinner. I had designed a oring mount in the summer for my standard size however it didnt work with the low profile batteries. I designed this mount. Uses all…
Only momovr or bobovr headset, and Size optimized for Samsung older batteries Make sure to slide from the side to install or remove adapter. Please don't put it on top. Inner size = 143 x 72 x 15 (1pack)
With this Stromer ST2 Charger Holder, your charger will be fixed on the handlebar.
Previous version had slicing issues in Simplify3D. This version will slice properly.
these should be printed, standing flat on the print bed, with at least 4 walls, to ensure their longevity, from being used in a HAAS ST10 or ST20 CNC lathe.
Replacement for a missing knob. Print Settings Printer Brand: Anet Printer: A6 Resolution: 0.1 Infill: 100% Filament: various PLA 1st white, 2nd black Category: Music
I liked the front design, so i remade it a single cradle for the 18 & 20v smaller battery as well.
Earphone for Oculus Quest 2. This earphone are especially designed to be attached to the original Elite strap. To complete the project you need the following stuff: Earphone drivers 3.5 audio jack 3x18mm screw A piece of fabric to warp…
Done on Feb. 2021 works perfectly on quset 2. You need to do mirror in slicer work with $3 strip on 1688.com handstrap was remixed from https://www.thingiverse.com/thing:4640517 sldprt file on my grabcad page:…
I made this because my head is tooooo wide even for wider face pad. I use a thicker vive face pad in this project. sldprt files from my grabcad page: https://grabcad.com/library/oculus-quest2-knuckle-kit-1 Category: Parts
Whats connector parts for following Quest1 Strap. ￥ 927 52%OFF | GOMRVR Adjustable halo Strap for Oculus Quest VR Comfort Foam Pad Strap, Perfect 50: 50 Balance Weight, Relieve Face Squeeze https://a.aliexpress.com/\_mKuJZKf Just It take…
Compact two-part enclosure for the ST2VGA ENHANCED and ST2VGA adapter by Sidecartridge . Protects the PCB and provides tidy access to the VGA connector, the 3.5 mm audio jack, and the slide switch. What this is An enclosure sized to the…
Grate to cover the holes on the rear cover of Haas ST25Y. We run another machine behind our CNC Lathe and found out that it was throwing chips into the vent holes at the rear of the machine. Made this little design to help keep the chips…
Ghost1 can be printed with infill. Ghost2 was designed to print with spiral vase mode. I tested Ghost2 with a .4mm and .6 mm nozzle, they both work great. Ghost2 can be scaled up to 200mm tall , any taller and the overhangs kick in.
The mounting nut of the installation socket covers the access to the release mechanism. The gap in this spacer ring allows access and release again.
I designed these after a I bought a server with no drives and there was no way to get empty drive holders.
.2 layer height Print the ring flat on the bed for optimal strength. No supports In the files is the original Quest2 mount if you don't have it already.
For the production of this "thing", in addition to printing, you will need a metal axis with a diameter of 2 mm and a le
Pickup frame model for HB CST24
drucktest2a (mirrored) for 3d printing press original file at https://www.thingiverse.com/thing:4332689 My printing press to follow later Category: 3D Printing
Quest2 VR hanger for GT omega seat Category: Video Games
While restoring my son's Toyota Celica ST 204 1996 model, there are several parts either not available at all or only makeshift alternatives. This rubber shock boot (fits both front shocks, which KYB astonishingly still produces new) with…
DIY Oculus/Meta Quest2 Batterie Strap Adapter for my Skyzone/Eachine CobraX V2 FPV Goggle The last Iteration is more universal (USB-C jack…Raspberry Pi?) and more comfortable to handle. Use double sided foamtape and o-rings Strap_B: both…
a wall mount for the controller of the quest2 you also need two screws for fixing it
Adapter bracket for securely mounting Samsung rear surround speakers to Kanto ST28 speaker stands. I used the Kanto ST28 and the rear surround speakers included in Samsung HW-Q995B, but this adapter might also work for other combinations.…
výřez pro ST 212 byla super, bohužel výška boxu je nedostatečná, nelze nastavit do výšky další box. Proto jsem udělal remix. Foto původní a nová verze vedle sebe. Nová verze pro gridfinity 6U
TRX4M-headtracking-quest2: FOR EVERYTHING GO TO GITHUB!! https://github.com/NickEnMax/TRX4M-headtracking-with-quest2 This is a project that makes fpv headtracking possible with a quest 2 on a trx4m. ⚠ DISCLAMER: "The code in this…
Compact two-part enclosure for the ST2VGA ENHANCED and ST2VGA adapter by Sidecartridge . Protects the PCB and provides tidy access to the VGA connector, the 3.5 mm audio jack, and the slide switch. What this is An enclosure sized to the…
The issue with the original front mudguard of the ST2, ST3, ST5 and the ST7 (ST2: the new models with 27,5 inch wheels) is that it is a little too short for rainy road conditions. Without extensions, it is easy to get your shoes and pants…
