Schumacher LD2/LD3/ST2 Low Profile LiPo Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I recent got some Low Profile batteries and obviously they are quite a bit thinner. I had designed a oring mount in…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 36
- Makes
- 0
- Views
- 354
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I recent got some Low Profile batteries and obviously they are quite a bit thinner. I had designed a oring mount in the summer for my standard size however it didnt work with the low profile batteries. I designed this mount.
Uses all original fittings and nuts etc. You need 44mm diameter orings, search on eBay, they are pretty cheap to buy. You want either 2mm or 3mm, I am currently using 2mm.
I have also added a 2mm thicker version for added strength, needs a shorter nut or longer bolt.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50%
Notes:
I recommend using PETG or ABS as PLA may warp if it gets too warm under the shell.
Category: R/C Vehicles