Counting matching models…
All parts have been specially redesigned with printability in mind. As such, not all components are 1-1 with their original counterparts. Some tolerances might be off depending on your print settings, but this should be solved with a bit…
These create perfectly evenly spaced ports for sirens in Tinkercad! You can also just use these to help u find what width to make your block to cut the ports. That is preferred, so that the port walls are straight instead of angled…
remixed fan duct by Segelkram to include a 40mm diameter bezier cone in the center (the size of a typical fan center hub) which should reduce turbulence and improve laminar flow. recommend printing with supports enabled. The cone base…
Serpentine coil stator using a single winding rather than 8 separate coils.
Bobble the head of your favorite Decepticon Warrior! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of the head from…
This is my first attempt at designing a 3D printed wargamer tank. I think it turned out pretty well. It certainly has a striking silhouette. While I don't think it will be a problem, I haven't tested this on a bed-slinger style printer.…
Replace Studio Series Devastator's knee joints to centre the legs. Requires disassembly of thighs (4 screws). Direct replacement for stock parts, retains original functionality.
Mounting plate for installing Nvidia Jetson Nano on Devastator Tank (DFRobot)
Add-on connector pieces to centre knees of Studio Series 86 Devastator. Attach to stock figure with no modification necessary. Raises height of figure by approximately 1".
Here's an homage to the Transformers Devastation game, in the form of a pair of drill hands for the recent SS86 Devastator! This pair of pointed weapons attach onto Devastators arms, taking the place where his hands were, giving him his…
A remix, scaled to 150%. The stand can be found with the link to the original artist.
I designed this duct to fit a 40mm fan on the e3d hotend heatsink (fits V5 and V6, bowden or non). I had used a similar design for several years, but it had some quirks that were annoying to deal with. I also learned some interesting…
OW stators balance pretty well on the end of the axle but this helps ensure your stator remains in place while working hall sensors, seized bearings, etc… or whatever else you're doing to stay riding. Printed mine in Prusament PETG and…
not printed yet fully made in tinkercad
Stator cover for YAMAHA XSR900, MT09 or FZ09 2016-2020 VERSION 2 Ready to print. Use existing bolts. DONT USE PLA, minimum PETG I used PETG, just ordered PETG Carbon Fiber for final piece Infill 100% Print Settings Printer Brand: Creality…
If you have a xd motor like me this is a remodeled one i kept these for my self but here you go STH-10 GE MOTOR COVER IS IN MY PROFILE
A no-bs handle to get better leverage when pulling the stator off/on the CannonCore motor.
DVS-1D Devastator for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files • dvs-1d-6.stl…
This is my take on Devastator from Transformers. You may need to rescale this design to fit your needs.
Don't you wish your giant construction-themed robot had giant wrecking ball fists that could demolish all opponents? There are three files here. Each one is split in half, so that you can print without support and combine with super glue.…
This is a brushed DC motor using four coils and two stators. Full details can be found here . Category: Electronics
This is a brushed DC motor using two coils and two stators. Full details can be found here . Category: Electronics
Replacement foot for the Cooler Master Storm Devastator, reported as working by the end user. Printed in PETG, recommended using PETG since the foot flexes into the frame to latch in. Generic PETG 0.2 STRUCTURAL profile sufficient.
Faux treads to fill the empty space in FansToys Wright figure. Connects with tabs/slots into figure. To install, hook around peg on bottom end of tread and clip into place. Very secure once in place.
If you prefer the minimalist look of removing the bodyshell but still want protection for the electrics, then this is the make for you. Print the main roof upside down so no supports are needed. Use the original screws, they are long…
The HBX Devastator 2098b is a 1/24th scale micro sized rc crawler. The stock steering link arm bows downwards which means it is usually the first thing to contact an obstacle, sometimes causing the crawler to get hung up on it. I designed…
These are replacement hands for the 3rd party figure DX9 Hulkie. I printed them in PETG and the tolerances on the peg to attach the hand and the 5mm port were perfect.
Remixed for 25mm fan using M3 hardware: https://www.thingiverse.com/thing:3624012 I needed something to muffle the outrageously noisy fan I selected. It seems to have helped both the noise and the airflow. It could always just be the hope…
This is a replacement handle for the gestalt gun handle belonging to Jin Bao's Dr Crank (Devastator) combiner. The included handle has a fairly poor design featuring a large "foot" which results in the ring finger being pushed out…
"Stator" of the Push Lock Arm Crank Assembly for PIPP Mobile Storage Systems Mechanical Assist Carriages. https://www.pippmobile.com/mobile-carriages/mechanical-assist-carriages/…
I designed this stator stand to keep my Onewheel Pint Hypercore stator stable and upright during a Superflux cable swap. It should be compatible with all Onewheel+ XR and Onewheel Pint Hypercore stators.
General purpose case for TBS Unify Pro 5G8 HV VTX. Designed for mounting on DFRobot Devastator robotics kit, but could be used for other purposes. I used 4 x M3x16 screws and 4 x M3 nuts, but would recommend using M3x18 screws or longer.…
8 port chopper and stator uses a DC motor
An Air Raid Siren stator to go with the assembled rotor, with 1 washer and 1 more backup. To assemble, first add the wheel bearing and glue together. MAKE SURE YOU DON'T GLUE THE CENTER!!! Then, insert the full rotor assembly and add the…
Mount to a plaque (the star pattern in the mount allows for passing of a screw driver). *THE MOUNT WAS DESIGNED TO PRINT IN TPU* (I used SainSmart TPU ). If you print in a rigid material, the star flaps will likely snap off. Also, the “C”…
This is a brushed DC motor using four coils and four stators. Full details can be found here . Category: Electronics
This is a compact 3D-printable multi-strand wire dispenser designed to simplify parallel coil winding for BLDC stators and similar motor projects. It keeps multiple enamel wires aligned and tensioned, making it easier to wind clean and…
Print with a about 50%. Infill. 2 of them is needed. Stick the stator sping connectors on, lower the stator into place. Use pliers to hold on to the lever and stick the printed tool into where brushes are normally placed. This tool will…
3 Scales of Thunderbolt Siren Stators, the drilling templates will be out soon. Needs Brass, Zinc, Cast Iron and a hint of copper or bronze.
modification pour mettre une bague de roulement en laiton
This is just this things I changed Rotor stator are now high poly Rotor now has a .50mm gap for tolerance instead of 1.88 Rotor now can take a 8MM to 8MM shaft coupler. The shaft coupler:…
Modified stator for BabettaECU Main difference from stock is removed ignition (capacitor charge) coil slot and added slot for hall effect sensor module, it also allows isolation of AC from the frame to reduce EMI and therefore protect the…
Is a doble-tone siro drone. I didn't pinted it but if you want to print the hole siren go to:
Here's an homage to the Transformers Devastation game, in the form of a pair of drill hands for the recent SS86 Devastator! This pair of pointed weapons attach onto Devastators arms, taking the place where his hands were, giving him his…
Deciding to go for a more dynamic look for the earlier Drill hands for SS86 Devastator, here's a motorized version of it to give it some spinning goodness! This kit will require a DC motor with gear attached for each of the drill hands,…
This is my take on Devastator from Transformers. You may need to rescale this design to fit your needs.
This is a compact 3D-printable multi-strand wire dispenser designed to simplify parallel coil winding for BLDC stators and similar motor projects. It keeps multiple enamel wires aligned and tensioned, making it easier to wind clean and…
Mounting plate for installing Nvidia Jetson Nano on Devastator Tank (DFRobot)
Deciding to go for a more dynamic look for the earlier Drill hands for SS86 Devastator, here's a motorized version of it to give it some spinning goodness! This kit will require a DC motor with gear attached for each of the drill hands,…
