Counting matching models…
Simple and clean looking Xbox Controller Stand fits 8x3mm anti slip rubber pads (optional) Commercial license Do you want to sell prints of this model? You can purchase commercial licensing for this model by joining the Commercial license…
Awesome Skull Bowl for Halloween candy/decoration. I would love to see your makes! Post them below. This is easily one of the coolest 3D prints I've done. It was designed for no supports, but I would use supports of at least 75+ degree…
UPDATE: 15th September 2023 - Thank you all for the positive feedback for v3. I've now removed v2 as a result. UPDATE: 24th July 2023 - Whilst v2 was a lot better fit I understand some comments about smaller pieces going under the scoop.…
[10 Dec 2024] – Update to V1.3.1 Changes: - Case Front has been updated to fit the new BLE antenna on the V3.2 board ( details here ) The original case design that started it all for the Heltec V3 Lora board. Recommended to print in a…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Hi everyone this is a finger chopstick I made. It has offset teeth for better grip of small objects.
Customized version of https://www.thingiverse.com/thing:2404850 , with added labels on top, to show the grit of sandpaper used. They go from 80 to 3000. If your sandpaper is a different grit, there's a blank top template provided. With…
I couldn't find a decent model of a Lawn chair on Printables. Thought I'd share on here! I used my Bambu Lab P1P with .2mm nozzle and .1mm layer lines. I cranked this baby to 100% infill because the model is so thin anyways. I also used…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
All parts are printed without support, Z=0,30mm. For shooting mehanizm you need 10x standard everyday elastic rubbers. It is constructed that you can replace the elastic if it become weak. Print it with PLA or PETG. I suggest that you…
Upright-floating plastic ducks. each duck file comes with a different set of accessories (some accessories may affect ability to float upright) all files are designed to be printable without supports. Recommended settings for default…
Heads-up News Heads-up #1: there’s a newer version of this here: https://www.printables.com/model/1247920-new-v30-of-top-riser-set-for-flashforge-adventurer Also, heads-up #2: There is a helpful new “guard plate” improvement remix…
Nearly 50% Reduced Time and Plastic Plus Separate Models for Individual Tests All-In-One From 6h57m to 4h8m 44g of material to 23g of material Separate Model Print Times Diameter Test - 32m 25mm String Test - 28m XYZ Dimension Test - 39m…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
I remixed agepbiz’s XBOX Controller Stand because it was amazing, while respecting the design to make it suitable for a Nintendo Switch Pro Controller. The remix source is here.…
How to use the 'All Files' choice "Download All Files" gets everything — including the .3mf file — named " ad5m-minimal-enclosure-by-design8studio-for-orcaslicer-230.3mf " — which is an OrcaSlicer project file , containing multiple print…
[3 Dec 2025] – Second Version V2.1 - Heltec V4-compatible cases added This H1+ case is a remix of the original H1 case design by muzi.works and reworked to, as the ‘ + ’ in the name suggests, accommodate a further enhanced Heltec V3/V4…
Holds: 10 MicroSD Cards 6 Standard SD Cards 6 USB(A) Memory Sticks
Create your own PET filament from plástic bottles! You can find all the information, blueprints, instructions, and much more on my website: https://sites.google.com/view/ecodecat3d/home KIT For a much easier assembly, you can purchase the…
A GPS enabled Meshtastic® case for the Heltec T114 board with GPS module. Install the buttons, board, GPS module, SMA Pigtail and snap the 2 halves of the case together. Secure with a M3 screw for a rock solid enclosure. License and Fair…
ChopstickCheaters to let your kids eat with chopsticks. Easy and fast print and a lot of fun! V2 now prints with no supports. Use PETG to be able to put them in the dishwasher. PLA works fine but may not stand the heat. Made for…
- IF YOU JUST BOUGHT a PARTS KIT from KB-3D.com → please go to the following download page for the MK6 : Fun Size KB-3D Build Kit : https://www.printables.com/model/1246713-the-recreator-3d-mk6-fun-size-a-kb-3dcom-build-kit If you are…
Try the new and improved V2 here! This skull planter/pen holder comes in a solid version, and one with drainage holes for plants! I know you overwater them, I drowned a cactus once. You're very welcome. There is now a new jawless model,…
This is elastic dragon. I recommended support.
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
Push stick for pushing wood on a jointer or table saw. Printed in PLA+ but any other filament should do
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
I recently needed some small trophies for different categories, so I came up with these. They are small and need only ~4g of filament (plus 5g for the simple base). Scale as needed, but I doubt it's well suited for much bigger size… (I…
Parts print flat and snap together. Print shorter legs for electric guitar and longer legs for acoustic guitar. The connector and right and left back are the same for both versions.
https://www.buymeacoffee.com/maxt ---------------------- UPDATE 22nd Mar 2023 : The model has been updated to v4. A complete rework based on Tripp Trapp Trofast Clip (metal basket) . That model gave me the idea, that it's much better to…
Announcement: The Stick Shift Fidget Toy V2 has been released! It's completely redesigned from the bottom up. We took all the complaints from the last version into consideration when designing this. Now, all the parts screw together…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
🦆 Articulated Platypus – Quirky, Wiggly, and Adorably Confused Is it a duck? Is it a beaver? Is it broken? Nope — it’s just a Platypus. A weird, wonderful, fully articulated one. This little creature slides across your desk with flappy…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken ( https://www.3dchicken.co.uk ) These…
This device can cut plastic bottles into strips of 7 and 11mm for 3D filament.
Protects your Joy-Con sticks from getting drift issues. Simple slide on and pull out. Prevents from tilting and clicking the sticks during travels. Available for Joy-Cons and the Pro-Controller.
When I discovered snacking tongs on printables, I really liked the idea and immediatly downloaded and printed one. They served their purpose, but they just felt wrong between my fingers. They were too bulky, heavy and they used a lot of…
Hello There I made a minimalistik version of my horizontal stand. I was inspired by Jon May and his digital stand. This version uses 50% less Material and has a little better fit. I hope you like this Version as well and post a make or a…
Simple and easy to print filament waste bin for QIDI Q2. Unlike most other models does not require any additional hardware (magnets, screws, adapters, etc.) to mount. The hook/latch design relibly holds the bin in place while still being…
Hehe cool light staff
I recommend printing with organic supports with a minimum fill of 25%
solstice · vase modern minimalist vase design full dimensions in mm ~ x: 118 · y: 118 · z: 175 includes profiles at full size and 80% scale .40 nozzle 10% gyroid infill variable layer height notes includes bambu studio 3mf files and STLs…
For older comments, remixes , etc. see the Thingiverse page where I originally posted this model. Otherwise all files are posted exclusively here on Printables. PRINTING I printed the main left/right sides and the top face down with…
a simple no fancy pants Plastic Bag Clip - Paper Clip - Money Clip. Plastic Bag Clip for your favourite potato chips bags! will also work on cheez doodles bags, as paper clip, as a money clip and for other similar instances where you need…
Level up your desk game! This isn't just a sticky note holder; it’s a complete productivity toolkit. Designed with a built-in pen slot and a dedicated storage bay for custom stencils, this model helps you turn a plain square of paper into…
A beautifully designed contemporary cat sculpture that fits perfectly into any modern home. A great gift for any cat lover. Looks best when printed in matte black. Can be scaled to any size but should have enough depth in order to have a…
Update 25/2/2024: Fixed knife blade point. I had noticed that there were not a lot of realistic pocket knife options out there, so I ended up CADing one. It turned out better than I had anticipated. It comes with a locking mechanism and…
These knuckles, smooth and shiny and bright, Bring a sense of justice and might. But be careful with their power, In a real brawl, you might cower, And no one wants a black eye from a fight. Plastic knuckles, also known as knuckle dusters…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
A plastic razor blade. Inspired by the incredible plastic blades made by Scraperite. Can be used for all sorts of stuff.
Fixed version of linked Thingiverse project. Printed on Bambu Labs X1C using Hatchbox Wood Filament. Use supports for the shields specifically and anywhere else you feel like it would be beneficial. Mostly default print settings for Bambu…
Cute Valentine Stich Use supports, infil 15%-20% Powered by PrintMon from MakerWorld (https://makerworld.com/makerlab/printMonMaker)
The Hovalin is a functional acoustic violin that can be produced using most standard consumer 3d printers. The total cost of raw materials for the violin (4/4) is currently about $70. The Hovalin was designed with Autodesk Fusion 360, and…
UPDATE : I have now added a version of the model with no magnet holes in the base. This will save you circa 15 minutes of print time a couple of grams of filament. If you don't need magnet holes (As I expect most dont), then the…
Update: 02/03/2023 I am now the proud owner of a Bambu Labs X1CC and am enjoying the AMS. I never printed my Foxy in multi colour at home and was horrified to find issues with this version of the model it which would affect a successful…
Remixed from the version uploaded by @ericsnis Follow Iterative revision to both suit my aesthetic preferences as well as added a slight functional upgrade with the new grip texture on the sides. Images show it printed with: 0.2mm layer…
Designed with the support and contributions of the “Recreator 3D” Discord community. This design uses a router bit as the main cuter. Has support bearings on both ends of the cutter for added support and tool longevity. Uses a small cheap…
This articulated spider was created for easy printing, strong joints and satisfying motion straight off the build plate. 🔹 Features Fully articulated flexi spider Smooth leg movement with flexible joints Print-in-place, one-piece model…
***BENDER2 WITH HELTEC V4 SUPPORT, GPS SUPPORT AND 4x 18650 BATTERY SUPPORT IS AVAILABLE FROM MY WEBSITE HERE *** Bender is a 3D printable case for the Heltec V3 and Heltec T114 LoRA Meshtastic powered Radio node. It features a bay for an…
A simple yet elegant chopstick clip. Keeps chopsticks aligned and secure before, during, and after use. A discreet acces
Outside dimensions of the model: The holes are 6mm x 11mm This is version 5 of a plastic replacement buckle that I designed with the FDM 3d printing process in mind: No support is needed Prints in only 30 minutes Optimized print…
The brand new McLaren MP4/4, piloted by the famous Ayrton Senna, is very good except for one crucial detail: the ratio of front to rear tyres does not match reality at all and can distract a bit. Yet all you have to do is print the tyres…
Push stick for tablesaw EDIT: 210121 Added some more versions and designs after users request. Print instructions Category: Hand Tools Summary Push stick for tablesaw EDIT: 210121 Added some more versions and designs after users request.…
Edited 09/27/2026 By user request, I added PIP clamps in 42 mm, 44 mm and 46 mm diameters. They are available only in the unmarked version, in the Pipe Clamps (second version, PIP, unmarked) folder. Edited 06/06/2025 I’ve added a custom…
Introducing the High-Precision Holder for Plastic Razor Blades, engineered specifically for the 3D printing community. Designed to securely hold those ubiquitous orange plastic razor blades, this holder offers a balance of ergonomics and…
Plastic Rivets created for Mazda M6. Diameter 17.8 / 6 mm, depth 17.4 mm
This is my next dragon. A few of the other ones I made were not very flexible, so I made this one extra flexible. When printing on an a1 mini, you can make this 33 inches. I haven't tested this, so if you print a dragon max size on a…
This is a remix of user Affordable3D's mini hockey stick model. The original model had a pretty cool curve in the blade of the stick that we had difficulty printing well with supports. This model removes the curve in the blade. We used…
I like the Finger Chopsticks from @MrDaedelus but they often slip from my fingers. It's also not possible to strech the chopsticks so i made a modded version. Normal: Diameter of the finger rings is around 22mm or 0.9 Wurstfinger. Small:…
This T-nut for 3030 extrusions doesn't require a hex nut or brass insert, as the bolt is screwed directly into the plastic. T-nuts for classic hex nuts often have the problem that they are weakened by the thinner plastic or one often…
I saw something like this at a restaurant and was able to make a similiar item for use at home. The print works well out of PLA filament and the fun colors are great for kids. Print time is about 8 minutes Of all the utensil holders I've…
Printing Instructions I had no issues printing the thing in PLA on my Prusa Mini + with 0.2mm layer height and using no support or anything.
I modeled these characters based on the popular game Meccha Chameleon, some of the poses are my own idea.
Benchy for the real world Recommend print with my profile! You can print in PLA, PETG, ABS. Support Free Enjoy
Snake model with magnet slots for attaching it to the refrigerator or any other surface that a magnet will stick to. This design is a single piece and requires no supports. For those who don't want magnet slots in the snake, I've also…
A very realistic and highly detailed bust of the Predator , inspired by the legendary extraterrestrial hunter from the classic sci-fi franchise. This striking 3D model captures the fearsome intensity of the character, featuring its…
Enjoy snacking while keeping your hands clean with the Snack Finger Chopsticks ! Perfect for gaming, working, or just enjoying your favorite snacks without the mess. These lightweight, ergonomic chopsticks allow you to grab chips,…
This is the final iteration of my lightweight 3D printable glider, developed and optimized after beta phase. During the beta stage, I tested balance and tail geometry. Based on "flight trials", the rear section (tail assembly) has been…
The motivation for designing yet another Gridfinity base grid was the hour of print-time and the sub-par angles on the original design. I figured that it's not necessary to extend to grid completely to the top of the 45° angle. Once…
I designed Joystick Toy in Fusion360 and prototyped it through several stages before landing on this design. I only recommend printing this assembly in PLA or a material that maintains dimensional accuracy after printing. It prints well…
A very simple holder for 76mm square Post-it notes or Sticky notes. Print instructions A very simple and straightforward print. Printed in PLA.
BACKGROUND More than 10.000, of 3D printed mini-sculptures have been handed out to world leaders, delegates and bystanders at COP30 Climate Summit in Brazil, Stand With Greenland Protest in Denmark, Munchen Security Conference in Germany…
This beauty is a bit tricky to print. I've included a prusa .3mf that should have slicer settings. The multi-color is done with filament changes. PETG and PLA both worked well, just ensure your bed is clean and sticky, and your stringing…
Sized inspired from commercial elastics threader. Easy and quick to print, a must to have in your sewing toolbox. I have added a version with holde to allow cords or round elastics insertion. Can be print in PLA or PETG
I designed this Chopstick Holder set with tray in SOLIDWORKS for the Printables Chopstick Holder contest (18/02/2023). It is already orientated to print easily in STEP & STL files so no supports required. The 4 Chopstick Holders fit…
This Dual Sticker Organizer Box was designed to help organize and store up to 300 World Cup stickers in a simple and practical way. The model includes a box with two compartments and a stand , keeping sticker stacks organized and easy to…
Print the model with glow-in-the-dark PLA. To obtain a better contrast, the first 0.2 mm were printed with black PLA.
Inspired by the design from FUN CHOP chopstick helpers. Great for rounded chop sticks as well. Recommend Print in PETG for flex and strength. Recommend 100% Infill FunChop chopstick Helpers (Amazon Link⬇) https://a.co/d/1i6oWUr
I'm very glad to present you the brand new majestic baby dragon A very flexible and cute little creature. I provide you this model with wings and without wings. Additionally both variants with separated eyes to print. The 3mf Multicolor…
Stich Use supports, infil 15%-20% Powered by PrintMon from MakerWorld (https://makerworld.com/makerlab/printMonMaker)
I had a collection of no brand silicone and glass containers with plastic lids like in IKEA 365+ containers and wanted to print one of the existing hanger models. I couldn't find much on printables but found some good examples on…
Prevent your Asus ROG Ally from getting stick drift while in transit with this 20-minute 10 cent print! These stick locks prevent your joysticks from moving and getting crushed while in a bag in transit. This helps prevent stick drift…
I wanted a little organizer for my hair ties and jewelry, so I made this little low poly tree. Prints with no supports and no extreme overhangs. The tree just slides in the base after printing. 0.2mm layer height PLA I've used these…
New improved version for 2026. It is broken into three parts. https://www.printables.com/model/1622682-ufs-170-ultimate-most-accurate-eiffel-tower-for-it Please send me your feedback. Thanks. I visited France this year and I was in Paris…
Keep your favorite glue stick and a backup close at hand with this dual glue stick holder for the honeycomb storage wall system. Fits into two empty inserts for the HSW system as well. Fits the 21/22g glue sticks or anything under 27mm…
Another remix with better unions between body and head.
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Materials recommended: PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: smooth Technical information for TM…
