Counting matching models…
Rim and drift tire for Maverick Strada RX 1:10 RC car. 12mm hex hub, 88mm in diameter , 31mm wide (62x29mm rim). I printed the rim in ABS and the tire in TPE (Fiberflex 30D), 10% gyroid infill. No glue needed, its a tight fit. If you make…
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
This model replaces the original mudguard with the integrated chainguard. Just removing the OEM one doesn't do the trick, as oil/grease/dirt from the chain will be yeeted everywhere. With this chainguard the back not only looks cleaner,…
Very nice and detailed car wall art model of a ferrari sf-90 Stradale. Size can be adjusted as wanted.
This model recreates the legendary Lancia 037 Stradale as a high-detail exterior-only shell — perfect for collectors, rally enthusiasts, and 3D printing fans. The shell has been designed as a single-piece, single-color model with no…
LEGO Lancia Rally Stradale
A navigation mount for a Garmin Zumo 395 was installed on my Ducati Multistrada when I bought it. I wanted to upgrade to the CarPlay solution from Carpuride with W702 and needed an adapter for the 7 inch display. The adapter is designed…
I created these to reduce the amount of wind buffeting I was experiencing at highway speeds with my 2017 Ducati Multistrada 950. I printed in ABS for strength. You'll need some M5 bolts/nuts/washers to mount the windshield. This does work…
Rim for original rubber tires, if you break the original Maverick Strada RX rim. (1:10 scale) 12mm HEX 62mm diameter 29mm width. The tire is glued on.
A jig to raise the nut to tension the timing belts on a ducati. Schould fit a metric size 30mm. The small one (13mm) is to pre-tighten the smaller nut, especialy the one behind the frame that doesn't fit a socket wrench and hard to reach…
Hi It is my wrench to link in my RC Car.
Alfa Romeo 33 Stradale
Hi it's my body post brace for HSP Flying Fish
These are spacers for Ducati Multistrada windscreen that hold the screen about 23 mm above the stock mounting surface. They are intended to reduce helmet buffeting and should also fit 1200 and 950 V2 models. How well these work varies…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Was looking for a Ducati Multistrada 2D picture to print but couldn't find one so made my own. Needs to be printed in 2 colours for best look. How I Designed This My first 2D design I downloaded 2 pictures 1 of the bike 1 of the road. I…
Sun Visor Support For Fiat Strada Print in place max 0.15mm layer height for better fitting prototypes printed in 0.2, 0.15 and final part printed in 0.08mm layer height printed in Bambu A1 mini
This is a GPS or smartphone mount that fits perfectly on a Ducati Multistrada V4 / V4S. Many thanks to @ BenBigBeard for sharing his Quadlock model, which I used as the interface. The Quadlock interface is available…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece.
The idea is self explanatory, I guess. For those of you daring enough to make changes to the design: good luck! I did not make the FreeCAD project very user friendly to edit. With the sk_Master sketch, the basic shape of the velomobile…
Ferrari SF90 Stradale as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
PLA Füllung 20% Schichthöhe 0,3mm mit Stützen und Rand Für “D-Schild.stl” habe ich Filamentum PLA Crystal Clear verwendet, Füllung 100%
HPI Maverick Strada DC / DC Brushless - Replacement Front Shock Tower. Original Part Number: MV22021 2x Different Versions: Stock - As per original part Heatsets - Added 4x Heatset inserts for the steering arm rather than threading into…
Light bar for HPI Maverick Strada MT (2017 edition, MV12623) which can be mounted on the shock tower. It fits behind the front or back bumper, as the chassis is symmetrical (there's more clearance in the back). It can be used with a 9mm…
I forgot i'd put my disk lock on my Ducati Multistrada V4 and over I went. As the bike has a keyless start I needed something to cover the start button so I didn't do it again so I made this cover hope you find it useful. Print Settings…
I wanted to hang a net on the radiator so I designed this hook. I think it should fit on all Jaga Strada radiotors. But please let me know if you find out that it doesn't fit. To mount, take of the top of the radiator, place the hook and…
Introducing the Simple Endcap for JAGA Strada Radiator Housing A sleek and practical solution for enhancing the aesthetics of your radiator setup. Designed to fit onto the side of the radiator housing, this endcap offers a clean and…
There's not much useable space on the front of a Multistrada once you get a tank bag mounted, so I made up a ball mount to go on the mirror stalk. I intend to use it as a camera mount but I suppose if you don't mind killing bugs with your…
Print with PETg aurapol orange and transparent blue.
Temporary shock mount for a Maverick Strada, print in petg or nylon
Custom display pedestal and plaque for the LEGO Speed Champions Ferrari SF90 XX Stradale . Designed for simple multi-color printing using filament swaps at specific layer heights. No MMU/AMS required. Layer Height Setup for plaque (0.2 mm…
Nostradamus (Michel de Nostredame) — Bust This bust represents Michel de Nostredame , better known as Nostradamus , a French Renaissance physician, astrologer and author, born in 1503 in Saint-Rémy-de-Provence and died in 1566 in…
Da stampare in PETG o ABS e va montato sulla piastra di sterxo dove in foto ci sono i circoli blu
🔹 Supporto per cartello su birillo 🔹 Questo supporto è progettato per fissare un cartello in plastica sopra un birillo stradale 🛑, ideale per segnaletica temporanea, eventi, cantieri e parcheggi. Grazie al suo design, garantisce una…
logo ducati classic 250 strada 80 90 old replica de logo ducati
passaggio per animali
Wrench for the Autostrada Modena 80mm hex wheel nut. Printed in PETG Inspired by: https://www.thingiverse.com/thing:4355515 Print settings: 4 Wall count 5 Top and bottom layers 15% Gyroid infil
This is a bicycle light mount adapter to get the Strada eXposure light to attach to a generic bike light mount. It probably won't fit your mount, but you can change the design yourself in OnShape.…
Quando si cambia moto ma si vuole tenere lo strumento di navigazione che già si utilizzava. Ho stampato i pezzi in ABS perchè la moto è soggetta a sbalzi climatici improvvisi, probabilmente può bastare anche il PTEG
Adattatore per equilibratrice per Ducati Multistrada
This model recreates the legendary Lancia 037 Stradale as a high-detail exterior-only shell — perfect for collectors, rally enthusiasts, and 3D printing fans. The shell has been designed as a single-piece, single-color model with no…
Was looking for a Ducati Multistrada 2D picture to print but couldn't find one so made my own. Needs to be printed in 2 colours for best look. How I Designed This My first 2D design I downloaded 2 pictures 1 of the bike 1 of the road. I…
A Astradaemon. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Alfa Romeo 33 Stradale, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
Comparatore per livellare il piano della Alfawise U30 realizzato con un calibro per misurare il battistrada dei pneumatici. Il calibro si aggancia al supporto ventole con 3 calamite (quelle per le lavagne magnetiche), la piastra frontale…
A Strada Slim computer will lock in place and allow the user to change the computers mode by pressing the bottom of the computer just like the factory clips. This model is intended to be fastened to the handle bars using two ~1.5x2.5mm…
