Counting matching models…
This is a remix of the model linked from Thingiverse. I modified it to be stronger and more play-friendly for my son who really wanted an Astrobot toy. Printed with PLA. Note : the antenna prints OK but it does fall of quite easily if not…
Astro Boy, known in Japan by its original name Mighty Atom, is a Japanese manga series written and illustrated by Osamu Tezuka. He is an android young boy with human emotions who is created by Umataro Tenma. Astro was sold to a robot…
I made this for my son after the first Astrobot game. After the success of the new game I thought someones kids might al
This is a remix of the linked Astrobot model and is intended to be a simpler one-piece print. It has been reinforced so it is less likely to break and it trades some character accuracy for that additional strength. For example, the…
Thank you for downloads, likes... Enjoy the model !
A new 3D figurine generated by AI, a Chibi Astroboy. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the camera…
I scaled Astroboy up to 225% and the backdrop wouldn't have fit on my printer so I designed this mount, it's balanced quite well and not easy to knock over, I add a hole for a threaded rod to add some strength just in case its not strong…
A lightweight clip/holder for STROBON Cree® Standalone strobe light for a DJI Mavic Mini or Mini 2 Each clip is around 1.6g when printed with PLA, On my Mini 2, the drone weighs 249.7g with 2 of these attached, including the strobe light.…
A lightweight belly clip/holder for STROBON Cree® Standalone strobe light for a DJI Mavic Mini or Mini 2
This a remix from "Funny toothpick dispenser" ( https://www.thingiverse.com/thing:3283381 ) from shusy, the only change is that it have Astroboy and not the weightlifter, this print just need some ensembly. Print instructions The top can…
Policejní blikač rudá/modrá barva dle zapojení: https://pihrt.com/elektronika/458-ne556-policejni-stroboblikac-tht-3d
Contact Name: Jayden Lin ([email protected]) School: W. P. Davidson High School (RoboTEx - Team 1128) BEST Hub: Emerald Coast BEST Introduction Figure 1: 3D printed prototype. The function of the human heart within the body serves two…
Joseph Lefevre Wetumpka High School Team 0625 Montgomery HUB - South’s BEST I first looked at how a real heart looks and how the heart functions. I also looked at bridge to transplant hearts that are already made and I used them to give…
Cute pose of Astro Bot - PS5 game character. Needs minimal support but requires delicate removal of antenna supports.
Stroboblikač: https://pihrt.com/elektronika/287-ne556-policejni-stroboblikac-smd Category: Electronics
Stroboscope tachometer - need lamp with blinking frequency 50Hz Print Settings Supports: No Resolution: 0.1..0.2 Filament: abs ABS White Category: Toys & Games
Llavero de astrobot, tené el simpático robot de PS para cuidar tus llaves. Astrobot keychain, have the cute PS robot to guard your keys. Parámetros de impresión: Impresora Flashforge AD5X MULTICOLOR: SI Material: PLA Altura de capa:…
Hello! Astroboy skating figure. Thanks for your download, enjoy the print!
Strobon Cree Standalone Holder for DJI Mavic Air 2 rear arms Tightly holds the Strobon Cree Standalone, and it is a snug fit on the arms, close to the props. Source in Onshape:…
this is astrobot dimensions are 63 mm height, 52mm length, 31 mm width
Swaying 10W LED lamp with stroboscopic effect, smartphone control. Servo motor moves power LED, ESP8266 controller. Servo limits, speed, and lamp strobe are adjustable via Wifi. 12V 1A DC power. Prepare the 3D printed parts. Cut aluminium…
Contact Name: James M. Salvant [email protected] School: Gulf Shores High School BEST Hub: Emerald Coast BEST Robotics - University of West Florida Highlights: This is a single chamber design that can be used as a stand alone system that…
Contact Name: Robert Smith, [email protected] School: Garden City High School BEST Hub: Kansas BEST How It Works Our bridge to transplant heart works by two screws (in black) being driven either two or one motor (stand-ins marked…
printet in PLA Matt von Redline Filament
Prusa Research 3D Printing National Challenge Entry #BESTRobotics2025 School: Martin's Mill ISD High School Team: Martin's Mill ISD Team #: 0215 Hub: Dallas BEST (TX) Model Description Function This particular 3D Model is a prototype of a…
School: Legacy Ranch High School Team: Robot Wranglers #0451 Hub: Hill Country BEST Function : The function of the gripper is to grab the factoid on the LOC tower. It attaches to a servo via piano wire that moves both fingers…
Prusa Research 3D Printing National Challenge Entry #BESTRobotics2025 School: Arrowhead Park Early College High School Team: Arrowhead Park Early College Team #: 0553 Hub: New Mexico BEST (NM), out of New Mexico State University Model…
I wanted a holder for my spark that was downward-facing, ensuring visibility no matter the orientation of the Drone. Easy 25 minute print, no supports required. I use a small rubber band to keep the LED in place Print Settings Printer…
I made this to hold the "Strobon" strobe light from Flytron, which you can find here: http://www.flytron.com/led-light-systems/99-strobon-navigation-strobe-light.html It fits in the cutout on top of the Skyhunter's fuselage which I've yet…
Halter für die FLYTRON STROBON für Nachtflüge mit geändertem Drohnengesetz möglich ab Januar 2022 https://www.copter.eu/yuneec-h920-tornado/yuneec-h920-zubehoer/flytron-strobon-strobe-led-weiss---rot---gruen.php Da es für die Air2 keinen…
A modular design containing a food grade charcoal filter and a baffled chamber for increased condenser surface area.
School: Rock Canyon High School Team: RCHS BEST Robotics (Accumetrics) Team #: 1919 Hub: Front Range BEST Function: This part aims to create a secure mount for the radio antenna (V5 Robot Radio piece) that allows the controller to…
This is a simple remix of Greg311's awesome dual screen front panel for the Tevo Flash. It adds just 2 small changes. A cutout for the Lerdge screen controller knob assembly (please note the cutout in the image above was done using a…
Prusa Research 3D Printing National Challenge #BESTRobotics2025 School name: Central Christian Academy Team number: 366 Team name: Cyber Lions Hub name: Kansas BEST – Wichita State University Model Presets: Tree support Support painting…
Prusa 3D Printing National Challenge Entry #BESTRobotics2025 Allen High School - Allen Eagle Robotics #0058, Collin County (CoCo) BEST Hub Model Description Function The function of this part is to use gravity in order to sort between…
Contact Name: Robert Smith, [email protected] School: Garden City High School - #0370 BEST Hub: Kansas BEST, under Denver BEST Region Function and Purpose The purpose of the belt tensioner is (as implied by the name) to add tension…
Prusa 3D Printing National Challenge Entry #BESTRobotics2025 Allen High School - Allen Eagle Robotics #0058, Collin County (CoCo) BEST Hub Model Description Function The function of this part is to act as a chain of blocks that can serve…
This small wire holder is originally designed to fit onto a robot to compete, keeping the wires organized. Lid is able to slide on and off Recommended screw size .5" or under
The Vertical V5 Battery Cage is an attachable structural component for robots that will hold and secure a V5 Robot Battery (Li-Ion 1100mAh) in a vertical position. This component addresses the problem of not enough space being available…
Prusa 3D Printing National Challenge Entry #BESTRobotics2025 Allen High School - Allen Eagle Robotics #0058, Collin County (CoCo) BEST Hub Model Description Function The function of this TCP is to securely and effectively rotate the…
cup separator for transport cups in profi-washerbox
Llavero de astrobot, tené el simpático robot de PS para cuidar tus llaves. Astrobot keychain, have the cute PS robot to guard your keys. Parámetros de impresión: Impresora Flashforge AD5X MULTICOLOR: SI Material: PLA Altura de capa:…
Even when I keep it in the case, I sometimes find that my Peterson StroboClip HDC tuner has gotten turned on, and the battery is dead. This clip on cover should protect the buttons from accidental pressing.
This set contains digital 3D figures of Astro Bot , inspired by the adorable characters from Astro’s Playroom game . The files are designed perfectly for SLA 3D printers. The collection includes: God of War – Kratos with Átreus in a boat,…
This is a little plastic cover for the round strobon lights. Category: R/C Vehicles
Even when I keep it in the case, I sometimes find that my Peterson StroboClip HDC tuner has gotten turned on, and the battery is dead. This clip on cover should protect the buttons from accidental pressing.
A Deadmoon-style remix of a classic retro robot boy figure, designed as a multipart multicolor print with clean color separation and minimal filament waste. Most parts print separately and press fit together, making it easier to get the…
Strobon Cree position/anti-collision light holder for the DJI Mavic Mini and Mini 2. There are others, this is mine. Printed from PETG they're flexible enough to clip onto the rear arms. The LEDs should face to the side. Print the pair;…
